The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - C - D - H - I - M - N - O - P - R - S - V -Index
A
area authentication command 1
area default-cost command 1
area nssa command 1
area range command 1
area stub command 1
autonomous systems
OSPF
(example) 1
C
clear ip ospf command 1
conditional default origination
OSPF
(example) 1
Configuring an NSSA ABR as a forced NSSA LSA Translator 1
Configuring OSPF NSSA 1
Configuring OSPF NSSA Parameters 1
D
Disabling and Enabling RFC 3101 Compatibility 1
DNS (Domain Name System)
OSPF lookup of DNS names 1
H
hello packets
OSPF, setting advertised interval 1
I
ignore lsa mospf command 1
ip ospf authentication command 1
ip ospf authentication-key command 1
ip ospf cost command 1
ip ospf dead-interval command 1
ip ospf demand-circuit command 1
ip ospf flood-reduction command 1
ip ospf hello-interval command 1
ip ospf message-digest-key command 1
ip ospf name-lookup command 1
ip ospf network command 1
ip ospf priority command 1
ip ospf retransmit-interval command 1
ip ospf transmit-delay command 1
M
MD5 (Message Digest 5) authentication
OSPF 1
N
neighbor database-filter command 1
O
OSPF (Open Shortest Path First)
address range for a single route, specifying 1
area parameters, configuring 1
authentication for an area, enabling 1
authentication key, specifying 1
authentication type for interface, specifying 1
autonomous system router configuration (example) 1
basic configuration (example) 1 2
complex configuration (example) 1
conditional default origination
(example) 1
default external route cost, assigning 1
DNS name lookup 1
flooding reduction 1
hello interval, setting 1
ignore MOSPF LSA packets 1
interface, configuration 1
link-state retransmission interval, setting 1
LSA flooding, blocking 1
LSAs to be flooded, displaying 1
MD5 (Message Digest 5) authentication 1
enabling 1
enabling for an area 1
MOSPF packets, ignoring 1
NSSA (not so stubby area)
defining an NSSA 1
packet pacing 1
path cost, specifying 1
point-to-multipoint (example) 1
router "dead" interval, setting 1
route redistribution (example) 1
router priority, setting 1
stub area, defining 1
transmission time for link-state updates, setting 1
ospf database-filter command 1
P
passive-interface command 1
R
router ospf command 1
S
show ip ospf border-routers command 1
show ip ospf command 1
show ip ospf database command 1
show ip ospf flood list command 1
show ip ospf interface command 1
show ip ospf neighbor command 1
show ip ospf request-list command 1
show ip ospf retransmission-list command 1
show ip ospf summary-address command 1
show ip ospf virtual-links command 1
stub area
See OSPF 1
subnets
variable length subnet masks
(example) 1
V
VLSMs (variable-length subnet masks)
OSPF (example) 1