IP Routing: BFD Configuration Guide, Cisco IOS XE Fuji 16.9.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

IP Routing: BFD Configuration Guide, Cisco IOS XE Fuji 16.9.x

Chapter Title

BFD Single-Hop Authentication

Results

Updated:
July 19, 2018

Chapter: BFD Single-Hop Authentication

BFD Single-Hop Authentication

The BFD Single-Hop Authentication feature enables authentication for single-hop Bidirectional Forwarding Detection (BFD) sessions between two directly connected devices. This feature supports Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA-1) authentication types.

This module explains the BFD Single-Hop Authentication feature.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Prerequisites for BFD Single-Hop Authentication

You must configure keys and key chains on both connected devices that are involved in a BFD session. You must configure the algorithm and the key chain on both devices in such a way that the configurations match.

Restrictions for BFD Single-Hop Authentication

  • If key chains are removed from the established BFD single-hop sessions or no active keys are present in the key chain, the BFD template and the map entry are invalidated. Such invalidation is considered as a map entry deletion.

  • Meticulous keyed MD5 authentication and meticulous keyed SHA-1 are not supported in In-Service Software Upgrade (ISSU) because checkpointing of sequence numbers does not occur in all packets.

  • Meticulous MD5 and meticulous SHA-1 authentication types are not preserved after Route Processor (RP) failures in Stateful Switchover (SSO) mode. The sessions could flap causing link instability of the registered protocols.

  • Only timers with values greater than or equal to 50 milliseconds are supported.

  • The authentication type negotiation and key exchange between two BFD peers does not occur.

  • When there is a missing key chain or when keys are not configured in a key chain, the BFD template and its associated map entries are invalidated, and the BFD session is not created.

  • You can apply Bidirectional Forwarding Detection (BFD) single-hop Authentication in a BFD-template configuration only. You cannot apply BFD single-hop authentication in legacy configurations.

Information About BFD Single-Hop Authentication

Benefits of BFD Single-Hop Authentication

Using the Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA-1) authentication methods defined in RFC 5880, the BFD Single Hop Authentication feature provides security against attacks on data links between a pair of directly connected devices involved in a BFD session. This feature is applied on data links between a BFD source-destination pair that communicates through IPv4 and IPv6 protocols across a single IP hop that is associated with an incoming interface. The communication may occur through physical media, virtual circuits, and tunnels.

Role of BFD Single-Hop Authentication in Preventing Denial of Service Attacks

To prevent denial of service (DoS) attacks, a BFD single-hop session validates the sequence number of a packet on receiving the packet. Detect multiplier is the number of missing BFD hello messages from another BFD device before the local device detects a fault in the forwarding path. The detect multiplier is used to determine the detect timer. The following are the ranges of valid sequence numbers that are accepted by the BFD Single-Hop Authentication feature:

  • For nonmeticulous keyed types: Last received sequence number to (last received sequence number + 3 * detect multiplier)

  • For meticulous keyed types: Last received sequence number + 1) to (last received sequence number + 3 * detect multiplier)


Note

For BFD, (transmit interval) * (detect multiplier) = detect timer. If a BFD control packet is not received from the remote system within the detect-timer interval, a failure has occurred.

How to Configure BFD Single-Hop Authentication

Configuring Key Chains

Perform this task on one of the two devices that are involved in a BFD session, and repeat the steps on the other device.

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. key chain chain-name
  4. key key-id
  5. key-string text
  6. end

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

key chain chain-name

Example:

Device(config)# key chain chain1

Defines an authentication key chain needed to enable authentication for routing protocols and enters key-chain configuration mode.

Step 4

key key-id

Example:

Device(config-keychain)# key 1

Defines an authentication key on the key chain and enters keychain-key configuration mode.

Step 5

key-string text

Example:

Device(config-keychain-key)# key-string key1

Defines an authentication string for a key.

Step 6

end

Example:

Device(config-keychain-key)# end

Exits keychain-key configuration mode and returns to privileged EXEC mode.

Configuring a BFD Template with Authentication

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. bfd-template single-hop template-name
  4. interval min-tx milliseconds min-rx milliseconds multiplier multiplier-value
  5. authentication authentication-type keychain keychain-name
  6. end

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

bfd-template single-hop template-name

Example:

Device(config)# bfd-template single-hop template1

Creates a BFD template and enters BFD configuration mode.

Step 4

interval min-tx milliseconds min-rx milliseconds multiplier multiplier-value

Example:

Device(config-bfd)# interval min-tx 120 min-rx 100 multiplier 3

Configures transmit and receive intervals between BFD packets and specifies the number of consecutive BFD control packets that must be missed before BFD declares that a peer is unavailable.

Step 5

authentication authentication-type keychain keychain-name

Example:

Device(config-bfd)# authentication sha-1 keychain keychain1

Configures authentication in a BFD template for single-hop sessions.

Step 6

end

Example:

Device(config-bfd)# end

Exits BFD configuration mode and returns to privileged EXEC mode.

Configuring a Single-Hop Template on an Interface

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. interface type number
  4. bfd template template-name
  5. end

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

interface type number

Example:

Device(config)# interface gigabitethernet 0/0/1

Enters interface configuration mode.

Step 4

bfd template template-name

Example:

Device(config-if)# bfd template bfdtemplate

Binds a single-hop BFD template to an interface.

Step 5

end

Example:

Device(config-if)# end

Exits interface configuration mode and returns to privileged EXEC mode.

Verifying BFD Single-Hop Authentication

SUMMARY STEPS

  1. show bfd drops
  2. show bfd neighbor

DETAILED STEPS

Step 1

show bfd drops

Example:

Device> show bfd drops

This command displays the number of dropped packets in BFD.

Step 2

show bfd neighbor

Example:

Device> show bfd neighbor

This command displays a line-by-line listing of existing BFD adjacencies.

Configuration Examples for BFD Single-Hop Authentication

Example: Configuring Key Chains


Device> enable
Device# configure terminal
Device(config)# key chain chain1
Device(config-keychain)# key 1
Device(config-keychain-key)# key-string key1
Device(config-keychain-key)# end

Example: Configuring a BFD Template with Authentication

Device> enable
Device# configure terminal
Device(config)# bfd-template single-hop template1
Device(bfd-config)# interval min-tx 120 min-rx 100 multiplier 3
Device(bfd-config)# authentication sha-1 keychain keychain1 
Device(bfd-config)# end

Example: Configuring a Single-Hop Template on an Interface

Device> enable
Device# configure terminal
Device(config)# key chain chain1
Device(config-keychain)# key 1
Device(config-keychain-key)# key-string key1
Device(config-keychain-key)# end

Example: Verifying BFD Single-Hop Authentication

Sample Output for the show bfd neighbor command 

Device> show bfd neighbor
      
IPv4 Sessions
NeighAddr                              LD/RD         RH/RS     State     Int
192.168.0.2                            1/12          Up        Up        Et0/0
Session state is UP and using echo function with 300 ms interval.
Session Host: Software
OurAddr: 192.168.0.1       
Handle: 12
Local Diag: 0, Demand mode: 0, Poll bit: 0
MinTxInt: 1000000, MinRxInt: 1000000, Multiplier: 3
Received MinRxInt: 1000000, Received Multiplier: 3
Holddown (hits): 0(0), Hello (hits): 1000(62244)
Rx Count: 62284, Rx Interval (ms) min/max/avg: 1/2436/878 last: 239 ms ago
Tx Count: 62247, Tx Interval (ms) min/max/avg: 1/1545/880 last: 246 ms ago
Elapsed time watermarks: 0 0 (last: 0)
Registered protocols: Stub CEF
Template: my-template                           
Authentication(Type/Keychain): sha-1/my-chain   
Uptime: 00:22:06
Last packet: Version: 1                  - Diagnostic: 0
             State bit: Up               - Demand bit: 0
             Poll bit: 0                 - Final bit: 0
             Multiplier: 3               - Length: 24
             My Discr.: 12               - Your Discr.: 1
             Min tx interval: 1000000    - Min rx interval: 1000000
             Min Echo interval: 300000

Sample Output for the show bfd drops command. 

Device> show  bfd drops
      
BFD Drop Statistics
                        IPV4    IPV6    IPV4-M  IPV6-M  MPLS_PW MPLS_TP_LSP
Invalid TTL             0        0       0       0       0       0
BFD Not Configured      0        0       0       0       0       0
No BFD Adjacency        0        0       0       0       0       0
Invalid Header Bits     0        0       0       0       0       0
Invalid Discriminator   0        0       0       0       0       0
Session AdminDown       0        0       0       0       0       0
Authen invalid BFD ver  0        0       0       0       0       0
Authen invalid len      0        0       0       0       0       0
Authen invalid seq      0        0       0       0       0       0
Authen failed           0        0       0       0       0       0

Additional References

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Command List, All Releases

IP Routing: Protocol-Independent Commands

Cisco IOS IP Routing Protocol-Independent Command Reference

Standards and RFCs

Standard/RFC

Title

RFC 5880

Bidirectional Forwarding Detection

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for BFD Single-Hop Authentication

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for BFD Single Hop Authentication

Feature Name

Releases

Feature Information

BFD Single-Hop Authentication

15.2(4)S

The BFD Single-Hop Authentication feature enables authentication for single hop BFD sessions between directly connected devices. This feature supports Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA1) authentication types.

The following commands were introduced or modified: authentication (BFD) , bfd template , bfd-template , show bfd drops and show bfd neighbors .

Was this Document Helpful?

FeedbackFeedback

Contact Cisco