State
|
Current state of VRRS on an interface. The values displayed are “ACTIVE”, “INACTIVE”, “NOT READY”, or “BACKUP”.
|
Virtual MAC
|
Virtual MAC address that is reserved for an interface.
|
Address-family
|
IPv4 or IPv6 address family.
|
Default Pathway
|
Indicates that the pathway has been implicitly created from a VRRP group, if the value is 1. If the value is 0, it indicates
that the pathway has been explicitly created using the
vrrs pathway command.
|
Owner Mode
|
Indicates that the interface IP address is specified if the value is 1.
|
Accept-Mode
|
Indicates that traffic to a particular virtual IP address is accepted if the value is 1.
|
Configured vMAC
|
Indicates that a virtual MAC address is configured if the value is 1.
|
No Shut
|
Indicates that the interface has been set to no shutdown mode if the value is 1.
|
Connected
|
Indicates that the VRRS pathway is connected to a VRRS group, if the value is 1.
|
OIR
|
Indicates online insertion and removal (OIR) of interface line cards on a device is complete if the value is 1.
|
L2 Ready
|
Indicates that the Layer 2 interface is up if the value is 1.
|
L3 Ready
|
Indicates that the Layer 3 interface is up if the value is 1.
|
vMAC Ready
|
Indicates that the virtual MAC address has been assigned to an interface if the value is 1.
|
vIP Ready
|
Indicates that the virtual IP address has been assigned to an interface if the value is 1.
|
Virtual Address List
|
Address list of the virtual IPv4 or IPv6 addresses.
|
Interface
|
Name of the interface where the pathway is defined.
|
vMAC
|
Virtual MAC address that is assigned to an interface.
|
vIP Address
|
Virtual IP address that is assigned to an interface.
|
Tags Connected
|
The specific tag name that is currently connected to a pathway on an interface.
|