Transferring Files Using HTTP or HTTPS

Cisco IOS Release 12.4 provides the ability to transfer files between your Cisco IOS software-based device and a remote HTTP server using the HTTP or HTTP Secure (HTTPS) protocol. HTTP and HTTPS can now be specified as the targets and source locations in Cisco IOS command-line interface (CLI) commands that use file system prefixes such as the copy command.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Prerequisites for Transferring Files Using HTTP or HTTPs

To copy files to or from a remote HTTP server, your system must support the HTTP client feature, which is integrated in most Cisco IOS software images. The HTTP client is enabled by default. To determine if the HTTP client is supported on your system, issue the show ip http client all command. If you are able to execute the command, the HTTP client is supported.

Commands exist for the optional configuration of the embedded HTTP client and for the HTTPS client, but the default configuration is sufficient for using the File Transfer Using HTTP or HTTPS feature. For information on configuring optional HTTP or HTTPS client characteristics, see the “Related Documents” section.

Restrictions for Transferring Files Using HTTP or HTTPs

Existing limitations to the copy command, such as no network-to-network copies, are in effect for the File Transfer Using HTTP or HTTPS feature.

Note

The copy command in Cisco IOS Release 12.4T does not work in conjunction with older versions of the Apache server software. The Apache server software must be upgraded to version 2.0.49 or later in order to use the copy command.

Information About File Transfers Using HTTP or HTTPs

To transfer files using HTTP or HTTPS, you should understand the following concept:

The File Transfer Using HTTP or HTTPs feature provides the capability to copy files, such as Cisco IOS image files, core files, configuration files, log files, scripts, and so on, to and from a remote server and your local routing device using the Cisco IOS copy command and command-line interface. The HTTP copy operation works in the same way as copying from other remote file systems, such as FTP or TFTP.

The HTTP copy operation can use the embedded HTTPS client for HTTP Secure transfers, providing secure and authenticated file transfers within the context of a public key infrastructure (PKI).

How to Transfer Files Using HTTP or HTTPs

This section contains the following procedures:

Note

To use the File Transfer Using HTTP feature, you may need to specify a username and password for the HTTP connections for those servers that require a username and password to connect. Commands are also available to specify custom connection characteristics, although default settings can be used. The feature also offers commands to monitor and maintain connections and files.

Configuring HTTP Connection Characteristics for File Transfers

Default values are provided for HTTP File transfers. The following task is used to customize the connection characteristics for your network to specify a username and password, connection preferences, a remote proxy server, and the source interface to be used.

SUMMARY STEPS

enable
configure terminal
ip http client connection {forceclose | idle timeout seconds | timeout seconds }
ip http client username username
ip http client password password
ip http client proxy-server {proxy-name | ip-address } [proxy-port port-number ]
ip http client source-interface interface-id
do copy running-config startup-config
end

DETAILED STEPS

Command or Action Purpose

Step 1

enable

Example:


Router> enable

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2

configure terminal

Example:


Router# configure terminal

Enters global configuration mode.

Step 3

ip http client connection {forceclose | idle timeout seconds | timeout seconds }

Example:


Router(config)# ip http client connection timeout 15

Configures characteristics for HTTP client connections to a remote HTTP server for all file transfers:

forceclose --Disables the default persistent connection.
idle timeout seconds --Sets the period of time allowed for an idle connection, in a range from 1 to 60 seconds. Default timeout is 30 seconds.
timeout seconds --Sets the maximum time the HTTP client waits for a connection, in a range from 1 to 60 seconds. Default is 10 seconds.

Step 4

ip http client username username

Example:


Router(config)# ip http client username user1

Specifies the username to be used for HTTP client connections that require user authentication.

Note

You can also specify the username on the CLI when you issue the copy command, in which case the username entered overrides the username entered with this command. See the “Downloading a File from a Remote Server Using HTTP or HTTPs: Example” section for an example.

Step 5

ip http client password password

Example:


Router(config)# ip http client password letmein

Specifies the password to be used for HTTP client connections that require user authentication.

Note

You can also specify the password on the CLI when you issue the copy command, in which case the password entered overrides the password entered with this command. See the “Downloading a File from a Remote Server Using HTTP or HTTPs: Example” section for an example.

Step 6

ip http client proxy-server {proxy-name | ip-address } [proxy-port port-number ]

Example:


Router(config)# ip http client proxy-server edge2 proxy-port 29

Configures the HTTP client to connect to a remote proxy server for HTTP file system client connections.

The optional proxy-port port-number keyword and argument specify the proxy port number on the remote proxy server.

Step 7

ip http client source-interface interface-id

Example:


Router(config)# ip http client source-interface Ethernet 0/1

Specifies the interface for the source address in all HTTP client connections.

Step 8

do copy running-config startup-config

Example:


Router(config)# do copy running-config startup-config

(Optional) Saves the running configuration as the startup configuration file.

The do command allows you to execute privileged EXEC mode commands from global configuration mode.

Step 9

end

Example:


Router(config)# end

Example:


Router#

Ends your configuration session and returns the CLI to user EXEC mode.

Downloading a File from a Remote Server Using HTTP or HTTPs

Perform this task to download a file from a remote HTTP server using HTTP or HTTPs. The copy command helps you to copy any file from a source to a destination.

SUMMARY STEPS

enable
Do one of the following:

copy [/ erase ] [/noverify ] http:// remote-source-urllocal-destination-url
copy https:// remote-source-url local-destination-url

DETAILED STEPS

Command or Action Purpose

Step 1

enable

Example:


Router> enable

Example:

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2

Do one of the following:

copy [/ erase ] [/noverify ] http:// remote-source-urllocal-destination-url
copy https:// remote-source-url local-destination-url

Example:


Router# copy http://user1:mypassword@209.165.202.129:8080/image_files/c7200-i-mx flash:c7200-i-mx

Example:


Router# copy

Example:


copy https://user1:mypassword@209.165.202.129:8080/image_files/c7200-i-mx flash:c7200-i-mx

Copies a file from a remote web server to a local file system using HTTP or HTTPS.

/erase --Erases the local destination file system before copying. This option is provided on Class B file system platforms with limited memory to allow an easy way to clear local flash memory space.
/noverify --If the file being copied is an image file, this keyword disables the automatic image verification that occurs after an image is copied.
The remote-source-url argument is the location URL (or alias) from which to get the file to be copied, in standard Cisco IOS file system HTTP syntax as follows:

http:// [[username :password ]@ ] {hostname | host-ip }[/ filepath ]/ filename

Note

The optional username and password arguments can be used to log in to an HTTP server that requires user authentication, in place of configuring the ip http client username and ip http client password global configuration commands to specify these authentication strings.

The local-destination-url is the location URL (or alias) to put the copied file, in standard Cisco IOS file system syntax as follows:

filesystem : [/ filepath ][/ filename ]

Note

For more information on URL syntax when you use the copy command, see the “Additional References” section.

Troubleshooting Tips

If file transfers from a remote web server fail, verify the following:

Your router has an active connection to the Internet.
The correct path and filename have been specified.
The remote server requires a username and password.
The remote server has a nonstandard communications port configured. (The default port for HTTP is 80; the default port for HTTPS is 443.)

The CLI returns error messages to help you determine the cause of a failed copy request. Additional information on the copy process can be displayed with the debug ip http client all command.

Uploading a File to a Remote Server Using HTTP or HTTPS

Perform this task to upload a file to a remote HTTP server using HTTP or HTTPS.

SUMMARY STEPS

enable
Do one of the following:

copy [/erase ] [/noverify ] local-source-url http:// remote-destination-url
copy local-source-url https:// remote-destination-url

DETAILED STEPS

Command or Action Purpose

Step 1

enable

Example:


Router> enable

Enables privileged EXEC mode.

Enter your password if prompted.

Step 2

Do one of the following:

copy [/erase ] [/noverify ] local-source-url http:// remote-destination-url
copy local-source-url https:// remote-destination-url

Example:


Router# http://user1:mypassword@209.165. 202.129:8080/image_files/c7200-i-mx_backup

Example:


Router# copy flash:c7200-i-mx http://user1:mypassword@209.165. 202.129:8080/image_files/c7200-i-mx_backup

Example:

Copies a file from a local file system to a remote web server using HTTP or HTTPS.

/erase --Erases the local destination file system before copying. This option is provided on Class B file system platforms with limited memory to allow an easy way to clear local flash memory space.
/noverify --If the file being copied is an image file, this keyword disables the automatic image verification that occurs after an image is copied.
The local-source-url argument is the location URL (or alias) from which to get the file to be copied, in standard Cisco IOS file system syntax as follows:

http:// [[username :password ]@ ] {hostname | host-ip }[/ filepath ]/ filename

Note

The remote-destination-url is the URL (or alias) to put the copied file, in standard Cisco IOS file system syntax, as follows:

filesystem : [/ filepath ][/ filename ]

Note

For more information on URL syntax when you use the copy command, see the “Additional References” section.

Troubleshooting Tips

If file transfers from a remote web server fail, verify the following:

Your router has an active connection to the Internet.
The correct path and filename have been specified.
The remote server requires a username and password.
The remote server has a nonstandard communications port configured. (The default port for HTTP is 80; the default port for HTTPS is 443.)

The CLI returns error messages to help you determine the cause of a failed copy request. Additional information on the copy process can be displayed with the debug ip http client all command.

Maintaining and Monitoring File Transfers Using HTTP

Perform this task to maintain and monitor HTTP connections. Steps 2 through 4 can be performed in any order.

SUMMARY STEPS

enable
show ip http client connection
show ip http client history
show ip http client session-module

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable Example: `Router> enable`	Enables privileged EXEC mode. Enter your password if prompted.
Step 2	show ip http client connection Example: `Router# show ip http client connection`	Displays details about active HTTP client connections.
Step 3	show ip http client history Example: `Router# show ip http client history`	Displays the last 20 URLs accessed by the HTTP client.
Step 4	show ip http client session-module Example: `Router# show ip http client session-module`	Displays details about about sessions (applications) that have registered with the HTTP client.

Configuration Examples for the File Transfer Using HTTP or HTTPs

Configuring HTTP Connection Characteristics for File Transfers Example

The following example shows how to configure the HTTP password and username for connection to a remote server that authenticates all users. The example also shows how to configure the connection for a 20-second idle connection period. The maximum time the HTTP client waits for a connection remains at the default 10 seconds.


Router(config)# ip http client connection idle timeout 20
Router(config)# ip http client password Secret
Router(config)# ip http client username User1
Router(config)# do show running-config | include ip http client

Downloading a File from a Remote Server Using HTTP or HTTPs Example

The following example shows how to configure the file c7200-i-mx is copied from a remote server to flash memory using HTTP. This example also shows how to enter a username and password from the command line for an HTTP server that authenticates users.


Router# copy http://user1:mypassword@209.165.202.129:8080/image_files/c7200-i-mx flash:c7200-i-mx

Uploading a File from Flash to the Remote HTTP Server Example

The following example shows how to copy a file from flash memory to the remote HTTP server. The example shows the prompts and displays that can be expected from transferring a file using the copy privileged EXEC command.


Router# copy flash:c7200-js-mz.ELL2 http://172.19.209.190/user1/c7200-js-mz.ELL2
Address or name of remote host [172.19.209.190]?
Destination filename [user1/c7200-js-mz.ELL2]?
Storing http://172.19.209.190/user1/c7200-js-mz.ELL2 !!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
17571956 bytes copied in 57.144 secs (307503 bytes/sec)

Downloading a File from the Remote HTTP Server to Flash Memory Example

The following example shows how to copy a file from the remote HTTP server to the flash memory. The example shows the prompts and displays that can be expected from transferring a file using the copy privileged EXEC command.


Router# copy http://172.19.209.190/user1/c7200-i-mz.test  flash:c7200-i-mz.test
Destination filename [c7200-i-mz.test]?
Loading http://172.19.209.190/user1/c7200-i-mz.test !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
.
.
.

11272788 bytes copied in 527.104 secs (21386 bytes/sec)

Uploading a File to a Remote Server Using HTTP or HTTPs

The following example shows how to copy a file to the remote server using HTTP or HTTPs.


router#copy flash
: http:
Source filename []? running-config
Address or name of remote host []? 10.1.102.1 Destination filename [pilot-confg]?file1 ...

Additional References

The following sections provide information related to transferring files using HTTP or HTTPS.

Related Topic	Document Title
Secure HTTP communications	HTTPS --HTTP Server and Client with SSL 3.0
Cisco IOS embedded web server	HTTP 1.1 Web Server and Client
Cisco IOS embedded web client	HTTP 1.1 Client
Network Management Commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples	Cisco IOS Network Management Command Reference
Configuration Fundamentals Commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples	Cisco IOS Configuration Fundamentals Command Reference

Standards


Standards	Title
No new of modified standards are supported by this feature, and support for existing standards has not been modified by this feature.	--

MIBs


MIBs	MIBs Link
None	To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs

RFCs


RFCs	Title
RFC 2616	Hypertext Transfer Protocol -- HTTP/1.1, R. Fielding, et al.
RFC 2617	HTTP Authentication: Basic and Digest Access Authentication, J. Franks, et al.

Technical Assistance


Description	Link
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.	http://www.cisco.com/techsupport

Feature Information for Transferring Files Using HTTP or HTTPS

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Table 1. Feature Information for Transferring Files Using HTTP or HTTPS
Feature Name	Releases	Feature Information
File Download Using HTTP	12.3(2)T	The File Download Using HTTP feature allows you to copy files from an HTTP server to a Cisco IOS software-based platform.
File Upload Using HTTP	12.3(7)T
File Transfer Using HTTP	12.3(7)T	The File Transfer Using HTTP feature provides the capability to copy files, such as Cisco IOS image files, core files, configuration files, log files, and scripts to and from a remote server and your local routing device using the Cisco IOS copy command and command-line interface. The HTTP copy operation works in the same way as copying from other remote file systems, such as FTP or TFTP. This feature provides support for copying files from a Cisco IOS software-based platform to an HTTP server, using either HTTP or HTTPs.

The Integrated File System Configuration Guide, Cisco IOS XE Everest 16.5

Bias-Free Language

Results

Chapter: Transferring Files Using HTTP or HTTPS

Transferring Files Using HTTP or HTTPS

Finding Feature Information

Prerequisites for Transferring Files Using HTTP or HTTPs

Restrictions for Transferring Files Using HTTP or HTTPs

Information About File Transfers Using HTTP or HTTPs

How to Transfer Files Using HTTP or HTTPs

Configuring HTTP Connection Characteristics for File Transfers

SUMMARY STEPS

DETAILED STEPS

Example:

Example:

Example:

Example:

Example:

Example:

Example:

Example:

Example:

Example:

Downloading a File from a Remote Server Using HTTP or HTTPs

SUMMARY STEPS

DETAILED STEPS

Example:

Example:

Example:

Example:

Example:

Troubleshooting Tips

Uploading a File to a Remote Server Using HTTP or HTTPS

SUMMARY STEPS

DETAILED STEPS

Example:

Example:

Example:

Example:

Troubleshooting Tips

Maintaining and Monitoring File Transfers Using HTTP

SUMMARY STEPS

DETAILED STEPS

Example:

Example:

Example:

Example:

Configuration Examples for the File Transfer Using HTTP or HTTPs

Configuring HTTP Connection Characteristics for File Transfers Example

Downloading a File from a Remote Server Using HTTP or HTTPs Example

Uploading a File from Flash to the Remote HTTP Server Example

Downloading a File from the Remote HTTP Server to Flash Memory Example

Uploading a File to a Remote Server Using HTTP or HTTPs

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Feature Information for Transferring Files Using HTTP or HTTPS

Was this Document Helpful?

Contact Cisco