- Feature History
- Using Ethernet Operations Administration and Maintenance
- ITU-T Y.1731 Performance Monitoring in a Service Provider Network
- Configuring Ethernet Connectivity Fault Management in a Service Provider Network
- G.8032 and CFM Support for Microwave Adaptive Bandwidth
- Transparent CFM
- Using Ethernet Fault Detection
- VLAN Translation with QoS
- Configuring Microwave 1+1 Hot Standby Protocol on the Cisco ASR 903 Series Router
- Microwave ACM Signaling Configuration and EEM Integration
- Using Link Layer Discovery Protocol in Multivendor Networks
- Ethernet Virtual Connections Configuration
- EVC Local Connect
- Configuring Ethernet Local Management Interface at a Provider Edge
- Trunk EFP Support
- Configuring Pseudowire
- Configuring IEEE 802.1ad
- Configuring Latching Loopback
Feature History
The following table lists the new and modified features supported in the Carrier Ethernet Configuration Guide in Cisco IOS XE 16 releases.
|
Feature Name |
Cisco IOS XE Release |
|---|---|
|
Maximum Transmission Unit Support on Bridge Domain Interface for the Cisco RSP3 Module |
16.12.1a |
|
BDI Statistics Support on RSP3 Module |
16.11.1a |
|
Layer 2 Hardware Protocol Forwarding on RSP3 |
|
|
BDI Statistics Support on RSP3 Module |
16.9.3 |
|
Multi EFPs for Single BDI Support on Cisco RSP3 Module |
16.8.1b |
|
EVC Egress Filtering for the Cisco RSP3 Module |
16.7.1 |
|
Layer 2 Control Protocol |
|
|
Latching Loopback |
|
|
Microwave Adaptive Code Modulation Enhancement |
16.6.1 |
|
Split Horizon Enhancements |
|
|
OAM (Link OAM,CFM and Y.1731) Support on Port Channel |
16.5.1 |
Feedback