This chapter provides information that you need to get started with Cisco Instant Connect. It includes these topics:
Cisco Instant Connect is an application for Android devices that allows you to use these devices to interact with other participants in a Cisco IP Interoperability and Collaboration System (IPICS) incident, channel, virtual talk group (VTG), and radio.
For information about Android devices and network configurations that support Cisco Instant Connect, see Cisco IPICS Compatibility Matrix.
Before you can use Cisco Instant Connect, you must download it to your Android device ad described in the “Obtaining Cisco Instant Connect” section.
Using Cisco Instant Connect with Cisco Instant Connect Express
Cisco Instant Connect Express is a mobile push-to-talk (PTT) solution based on the Cisco IP Interoperability and Collaboration System (IPICS). The system provides a subset of the features and functionality of Cisco IPICS.
When you use Cisco Instant Connect with Cisco Instant Connect Express, the only talklines that are supported are normal VTGs with users as the only participants.
The following features that this manual describes are not supported:
VTGs with users as participants
- Broadcast, incident, patch, and scan VTGs
- High availability
Obtaining Cisco Instant Connect
To obtain the Cisco Instant Connect application and install it on an Android device, access the Google Play Store from the Android device and download the application.
After you obtain the application, it appears on your Android device as Cisco Instant Connect.
Configuring a Sonim Device
If you will be running Cisco Instant Connect on a Sonim device over a 3G or 4G network, you must make the following configuration settings on your Sonim device. This procedure shows configuration settings that are required if you are using the AT&T network.
Before you perform this procedure, make sure that the SIM card is installed and activated in the device.
To provision a Sonim device to run Cisco Instant Connect over a 3G or 4G network, follow these steps:
Step 1 Tap Settings.
Step 2 Tap More… under WIRELESS & NETWORKS.
Step 3 Tap Mobile networks.
Step 4 Tap Access Point Names.
Step 5 Tap the expand icon in the menu bar.
Step 6 Configure the following options as shown:
- Name— AT&T
- APN— phone
- Proxy—Leave blank
- Port—Leave blank
- Username—Leave blank
- Server—Leave blank
- MMSC— http://mmsc.mobile.att.net
- MMS proxy— proxy.mobile.att.net
- MMS port— 80
- MCC— 310
- MNC— 410
- Authentication type—Leave blank
- APN type— default,supl,mms,hipri,fota
Other options on this screen do not need to be configured.
Step 7 Tap the icon in the menu to open the Settings menu.
Step 8 Tap Save.
Guidelines for Use
- An Android device can communicate with the Cisco IPICS server and UMS via a WiFi network connection or via a 3G or 4G connection (see Cisco IPICS Compatibility Matrix for details). If the Cisco IPICS server and UMS component are in an internal network, you must use the Cisco AnyConnect VPN Client to access the server, unless Cisco IPICS server and UMS component can be accessed by external devices via the public Internet without firewall restrictions.
- To allow audio communication, the Cisco IPICS server and the UMS component must be in a network that does not block voice over IP (VoIP) communication.
- If you are using Cisco Instant Connect on a WiFi network and have established an audio connection, you temporarily lose the audio connection if you move to a different network, for example from a WiFi network to a 3G or 4G connection.
- When you view a list of incidents, channels, VTGs, and radios, the information in the screen updates automatically every 10 seconds, by default, when you are using a WiFi connection, or every 60 seconds, by default, when you are using a 3G or 4G connection,
- Some communication between the Cisco Instant Connect and the Cisco IPICS server goes over a Secure Socket Layer (SSL) and is encrypted and secure. Secure communication includes logging in, logging out, and uploading resources. However, audio communication is not encrypted.
- If a standalone Cisco IPCS server fails while you are logged in from an Cisco Instant Connect, a message appears that says the server is unreachable.
If high availability is configured for the Cisco IPICS server, you can log back in by identifying the primary server, and the system redirects you to the secondary server automatically. If you are logged in to the secondary server when fallback occurs, you are reconnected to the primary server automatically.
- If you are using headphones with your Android device, plug in the headphones before starting Cisco Instant Connect.
For related information about the Cisco IPICS server, see the Cisco IPICS documentation.