Cisco HyperFlex Systems Upgrade Guide, Release 3.0

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco HyperFlex Systems Upgrade Guide, Release 3.0

Chapter Title

Post Upgrade Tasks

Results

Updated:
April 13, 2018

Chapter: Post Upgrade Tasks

Post Upgrade Tasks

Confirm That Upgrade Is Complete

Procedure

Step 1

Log in to Cisco UCS Manager to ensure that the HX nodes have no pending server activities.

From Servers tab > Servers > Pending Activities tab check for all server activities.

Step 2

Confirm that the HX nodes match the expected firmware version.

In Cisco UCS Manager, from Equipment > Firmware Management > Installed Firmware tab, verify for the correct firmware version.

Step 3

Log in to any controller VM through SSH.

# ssh root@controller_vm_ip

Step 4

Confirm the HyperFlex Data Platform version.

# stcli cluster version 


Cluster version: 2.5(1c)
Node HX02 version: 2.5(1c)
Node HX05 version: 2.5(1c)
Node HX01 version: 2.5(1c)
Node HX03 version: 2.5(1c)
Node HX04 version: 2.5(1c)
Step 5

Verify that the HX storage cluster is online and healthy.

# stcli cluster info|grep -i health

Sample output:
healthstate : healthy
state: healthy
storage cluster is healthy
Step 6

Verify that the datastores are up and are mounted properly on the ESXi host.

From the HX controller VMs:

# stcli datastore list

From the ESXi host:

# esxcfg-nas -l
Step 7

Verify that the upgrade is complete and is successful.

stcli cluster upgrade-status
Nodes up to date: 
[HX-Cluster, HX-Node-1(1.1.1.1), HX-Node-2(1.1.1.2), HX-Node-3(1.1.1.3)]
Cluster upgrade succeeded.
Step 8

For each browser interface you use, empty the cache and reload the browser page to refresh the HX Connect content.

Check Firmware Versions in UCSM

In Cisco UCS Manager, from Equipment > Firmware Management > Installed Firmware tab, verify for the correct firmware version.

For a complete list of hardware and software inter-dependencies, refer to respective UCSM release version using the UCS Hardware and Software Compatibility tool.

Verify If Cleaner Is Running

If Upgrade Fails

If upgrade fails, run cleaner. This is required even if you do not want to continue with an upgrade.

To run cleaner manually, restart the storage cluster cleaner using the following command.

stcli cleaner start [-h] [--id ID | --ip NAME]

Syntax Description

Option

Required or Optional

Description
--id ID

Optional.

ID of storage cluster node. The ID is listed in the stcli cluster info command.

--ip NAME

Optional.

IP address of storage cluster node. The IP is listed in the stcli cluster info command.

If Upgrade Completes

If upgrade completes, verify if cleaner is running. To obtain information about the storage cluster cleaner for the specified node, use the following command.

stcli cleaner info [-h] [--id ID | --ip NAME]

Syntax Description

Option

Required or Optional

Description
--id ID

Optional.

ID of storage cluster node. The ID is listed in the stcli cluster info command.

--ip NAME

Optional.

IP address of storage cluster node. The IP is listed in the stcli cluster info command.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco