To obtain the required software from Cisco, follow the steps listed.
Download software from www.cisco.com:
HX Data Platform update bundle (.tgz file)
See Deploying the HX Data Platform Installer section in Getting Started Guide for deploying the HX Installer.
Copy UCS bundles to UCS Manager.
Launch Web browser.
Type in the UCS Manager URL. For example https://10.193.211.120
Click the Launch UCS Manager button to open the UCS Manager GUI interface
Type in the username and password.
In the Navigation pane, click the Equipment tab.
On the Equipment tab, click the Equipment node.
In the Work pane, click the Firmware Management > Installed Firmware > Download Firmware.
In the Download Firmware dialog box, click the Local File System radio button in the Location of the Image File field and fill in the required fields.
In the Filename field, type the full path and name of the image file.
If you do not know the exact path to the folder where the firmware image file is located, click Browse and navigate to the file.
Click OK. Cisco UCS Manager GUI begins downloading the firmware bundle to the fabric interconnect.
Monitor the status of the download on the Download Tasks tab.
Repeat this task until all the required firmware bundles have been downloaded to the fabric interconnect.