Prerequisites
The following prerequisites must be met prior to configuring the Cisco HyperFlex CSI Integration:
-
Verify that you are using the Kubernetes Admin Guide for the installed version of HyperFlex. See the Cisco HyperFlex CSI Interoperability Metrics
-
This Cisco HyperFlex Systems Administration Guide applies only to HXDP Release 4.0(x).
-
Kubernetes worker nodes have the Linux
iscsi-initiator-utils
package installed. -
If running RHEL7 / CentOS7 or later versions, ensure the
iscsi_tcp
kernel module is loaded into the kernel at boot on all Kubernetes worker nodes by running the following command:echo iscsi_tcp >> /etc/modules-load.d/iscsi.conf