Verify whether a switch upgrade scheduler paused using the GUI

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

	1.	On the menu bar, choose ADMIN > Firmware.
	2.	In the Navigation pane, expand Fabric Node Firmware > Maintenance Groups.
	3.	Expand the Maintenance Groups, and click on All Switches.
	4.	In the Work pane, look to see if the Scheduler Status reads Paused. Note If the Scheduler Status reads Running, and the nodes in the group are proceeding in their upgrades or have completed their upgrades, the device is running and the upgrade is proceeding or has completed.
	5.	Go and fix the device, and repeat Step 1 through Step 4. At this point the Scheduler Status will read Running.
	6.	Using the Actions drop-down list on the top right, choose Resume Upgrade Schedule.
	7.	Using the Actions drop-down list on the top right, choose Upgrade Now.

Procedure