Resume paused controller upgrade scheduler using the GUI | Troubleshoot Failures During the Upgrade and Downgrade Process | Cisco APIC Installation and ACI Upgrade and Downgrade Guide

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

	1.	On the menu bar, choose ADMIN > Firmware.
	2.	In the Navigation pane, expand Fabric Node Firmware > Controller Firmware.
	3.	In the Work pane, click the Policy tab.
	4.	In the Controller Maintenance Policy area, verify that the Running Status field displays Paused.
	5.	Click the Actions tab, and click Resume Upgrade Scheduler.
	6.	Click the Actions tab, and choose Upgrade Controller Firmware Policy from the drop-down list.
	7.	Click the Actions tab, and choose Apply Now from the drop-down list.

Before you begin

Procedure