Install a Cisco APIC software maintenance upgrade patch using the GUI

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

	1.	Add the firmware image that corresponds to the SMU patch to the Cisco APIC. The patch will be listed along with any other firmware images (SMU patches and otherwise). For the procedure, see Upgrade or Downgrade with APIC Release 5.1 or Later Using the GUI.
	2.	Set up a controller firmware update. On the Version Selection screen, for the Update Type, choose Software Maintenance Upgrade (Install), then choose the SMU patch in the Select Firmware section. For the procedure, see Upgrade or Downgrade with APIC Release 5.1 or Later Using the GUI.

Procedure