The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Description: Assign a scheduler
Syntax:
|
WORD |
scheduler name (Max Size 64) |
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# schedule <WORD>
Description: Pause maintenance policy scheduler
Syntax:
|
pause |
Pause maintenance policy scheduler |
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# scheduler pause
Description: Show AAA Authentication information
Command Mode: exec : Exec Mode
Command Path:
# show aaa authentication
Description: Show AAA group information
Command Mode: exec : Exec Mode
Command Path:
# show aaa groups
Description: Active User Sessions
Command Mode: exec : Exec Mode
Command Path:
# show aaa sessions
Description: Show Access-list Information
Syntax:
|
WORD |
Name of the Contract to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show access-list WORD
Description: CLI configuration command logs
Command Mode: exec : Exec Mode
Command Path:
# show accounting log
NOTE:
This command displays only those changes made using the command line interface (CLI). It does not display changes made using the GUI or the API. To view all changes made in the Management Information Tree, use the show audit detail command.
Description: l3 flow information
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 flow
Description: tenant vrf information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) source Interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>
Description: detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) source Interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD> detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Pkt command
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 pkt
Description: Vrf Name
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) Source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) Source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: l3 flow information
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 flow
Description: tenant vrf information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
Protocol |
(Optional) Protocol |
|
SrcPort |
(Optional) source port |
|
DstPort |
(Optional) destination port |
|
srcintf |
(Optional) source interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>
Description: detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
Protocol |
(Optional) Protocol |
|
SrcPort |
(Optional) source port |
|
DstPort |
(Optional) destination port |
|
srcintf |
(Optional) source interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Pkt command
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 pkt
Description: Vrf Name
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
protocol |
(Optional) protocol |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
<0-65535> |
(Optional) Source port. Number range from=0 to=65535 |
|
<0-65535> |
(Optional) Destination port. Number range from=0 to=65535 |
|
srcintf |
(Optional) source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
protocol |
(Optional) protocol |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
<0-65535> |
(Optional) Source port. Number range from=0 to=65535 |
|
<0-65535> |
(Optional) Destination port. Number range from=0 to=65535 |
|
srcintf |
(Optional) source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: tenant vrf information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) source interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>
Description: detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) source interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD> detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Vrf Name
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
srcintf |
(Optional) source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: tenant vrf information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
Protocol |
(Optional) Protocol |
|
SrcPort |
(Optional) source port |
|
DstPort |
(Optional) destination port |
|
srcintf |
(Optional) source interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>
Description: detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
Protocol |
(Optional) Protocol |
|
SrcPort |
(Optional) source port |
|
DstPort |
(Optional) destination port |
|
srcintf |
(Optional) source interface |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Vrf Name
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
protocol |
(Optional) protocol |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
<0-65535> |
(Optional) Source port. Number range from=0 to=65535 |
|
<0-65535> |
(Optional) Destination port. Number range from=0 to=65535 |
|
srcintf |
(Optional) source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]
Description: Detail information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the vrf to filter on (Max Size 64) |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
time-stamp <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
protocol |
(Optional) protocol |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
A.B.C.D or A:B::C:D |
(Optional) IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
<0-65535> |
(Optional) Source port. Number range from=0 to=65535 |
|
<0-65535> |
(Optional) Destination port. Number range from=0 to=65535 |
|
srcintf |
(Optional) source Interface |
|
<1-65535> |
(Optional) packet length. Number range from=1 to=65535 |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) PC Tag (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
WORD |
(Optional) Epg Name (Max Size None) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcpctag <WORD>] [dstpctag <WORD>] [srcEpgName <WORD>] [dstEpgName <WORD>] [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Show analytics cluster configuration
Command Mode: exec : Exec Mode
Command Path:
# show analytics
Description: Show Application Profiles Information
Syntax:
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show application WORD
Description: Show audit-log information
Syntax:
|
<log-id> |
(Optional) Log ID |
|
action<action-type> |
(Optional) Object action indicator |
|
<user-name> |
(Optional) Name of user |
|
<num-minutes> |
(Optional) Logs created in time interval. Number range from 1 to 59 |
|
<num-hours> |
(Optional) Logs created in time interval. Number range from 1 to 23 |
|
<num-days> |
(Optional) Logs created in time interval. Number range from 1 to 999 |
|
<YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Logs created in time interval |
|
end-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Logs created in time interval |
|
detail |
(Optional) Detailed audit-log information. Displays what was modified and displays the old and new settings. |
|
<scope> |
command scope |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show Tenants Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Description: Show Application Profiles Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Description: Show Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD esg WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show Dns Server Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD
Description: Show Dns Server Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD server WORD
Description: Show Dns Domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
|
WORD |
Domain we eventually want to filter on (Max Size 512) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD server WORD domain WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show multicast route-maps per Tenant
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Description: Show VRF Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Description: L2 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flowi stats |
|
vlan |
vlan info |
|
<vlan> |
<vlan>. Number range from=0 to=9223372036854775807 |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L3 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flow stats |
|
srcpctag |
source pc tag |
|
<srcpctag> |
<srcpctag> |
|
dstpctag |
destination pc tag |
|
<dstpctag> |
<dstpctag> |
|
srcepgname |
source epg name |
|
<srcepgname> |
<srcepgname> |
|
dstepgname |
destination epg name |
|
<dstepgname> |
<dstepgname> |
|
srcip |
source ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
dstip |
destination ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
proto |
protocol |
|
<proto> |
<proto> |
|
srcport |
source port |
|
<srcport> |
<srcport> |
|
dstport |
destination port |
|
<dstport> |
<dstport> |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcpctag <srcpctag> dstpctag <dstpctag> srcepgname <srcepgname> dstepgname <dstepgname> srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: Show detailed view of VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Description: Show command for BGP peers
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<101-4000> |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: Show external l3 EIGRP
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show command for external-l3 epgs
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Description: scale command
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 scale
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 scale detail
Description: Show command for external-l3 static routes
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail
Description: Show ipv6 multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD ipv6multicast
Description: Show multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show command for callhome
Syntax:
|
common |
Common |
Command Mode: exec : Exec Mode
Command Path:
# show callhome common
Description: Show command for callhome destination-profile
Syntax:
|
common |
Common |
Command Mode: exec : Exec Mode
Command Path:
# show callhome common destination-profile
Description: Show command for callhome destination-profile
Syntax:
|
common |
Common |
Command Mode: exec : Exec Mode
Command Path:
# show callhome common query-profile
Description: Show command for callhome transport-email
Syntax:
|
common |
Common |
Command Mode: exec : Exec Mode
Command Path:
# show callhome common transport-email
Description: Show catalog information
Command Mode: exec : Exec Mode
Command Path:
# show catalog
Description: Show Commands Syntax
Syntax:
|
WORD |
Command Name pattern between single quotes |
|
<mode-name> |
(Optional) Mode name pattern between single quotes |
|
details |
(Optional) Show Command Details |
Command Mode: exec : Exec Mode
Command Path:
# show cli command <WORD> [mode <mode-name>]
Description: Show all cli-related commands
Syntax:
|
<mode-name> |
(Optional) Mode name pattern between single quotes |
|
details |
(Optional) Show Command Details |
Command Mode: exec : Exec Mode
Command Path:
# show cli list [mode <mode-name>]
Description: Show Commands ManPage
Syntax:
|
WORD |
Command Name pattern between single quotes |
|
<mode-name> |
(Optional) Mode name pattern between single quotes |
|
details |
(Optional) Show Command Details |
Command Mode: exec : Exec Mode
Command Path:
# show cli manpage <WORD> [mode <mode-name>]
Description: Show Commands Path
Syntax:
|
WORD |
Command Name pattern between single quotes |
|
<mode-name> |
(Optional) Mode name pattern between single quotes |
|
details |
(Optional) Show Command Details |
Command Mode: exec : Exec Mode
Command Path:
# show cli path <WORD> [mode <mode-name>]
Description: Show clock information
Command Mode: exec : Exec Mode
Command Path:
# show clock
Description: Show cloud AVE information
Command Mode: exec : Exec Mode
Command Path:
# show cloudave
Description: Show brief summary of cloudsec policies
Command Mode: exec : Exec Mode
Command Path:
# show cloudsec summary
Description: HTTPS service cipher suite listings
Command Mode: exec : Exec Mode
Command Path:
# show communication ciphers
Description: Show command for nginx web-requests
Syntax:
|
node-id |
node-id |
Command Mode: exec : Exec Mode
Command Path:
# show communication controller node-id
Description: HTTP service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication http
Description: HTTPS service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication https
Description: Show command for performance data
Command Mode: exec : Exec Mode
Command Path:
# show communication performance
Description: Show command for performance configuration
Command Mode: exec : Exec Mode
Command Path:
# show communication performance config
Description: Show command for performance results
Command Mode: exec : Exec Mode
Command Path:
# show communication performance results
Description: Shellinabox service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication shellinabox
Description: SSH service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication ssh-service
Description: Telnet service settings
Command Mode: exec : Exec Mode
Command Path:
# show communication telnet
Description: Status of last web requests
Command Mode: exec : Exec Mode
Command Path:
# show communication web-requests
Description: Show Contracts Information Based on Type
Syntax:
|
WORD |
whitelist (permit) or blacklist(deny) or oob-mgmt type of contract |
Command Mode: exec : Exec Mode
Command Path:
# show contract-type WORD
Description: Show Contracts Information
Syntax:
|
WORD |
Name of the Contract to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show contract WORD
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show controller
Description: Detailed controller information
Syntax:
|
node-id |
(Optional) Optional Serial number |
Command Mode: exec : Exec Mode
Command Path:
# show controller detail [id <node-id>]
Description: Show all core dumps
Command Mode: exec : Exec Mode
Command Path:
# show cores
Description: Show exported core status
Command Mode: exec : Exec Mode
Command Path:
# show cores status
Description: Show Counter information
Syntax:
|
<node-name> |
Node name |
|
<process> |
Process name |
|
<counterTopics> |
Counter Topics |
Command Mode: exec : Exec Mode
Command Path:
# show debug <node-name> <process> counter <counterTopics>
Description: Show log level information
Syntax:
|
<node-name> |
Node name |
|
<process> |
Process name |
Command Mode: exec : Exec Mode
Command Path:
# show debug <node-name> <process> log
Description: Node id
Syntax:
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
Command Mode: exec : Exec Mode
Command Path:
# show deployment endpoint node <WORD>
Description: Show fabric discovery issues
Command Mode: exec : Exec Mode
Command Path:
# show discoveryissues
Description: Enter node Id
Syntax:
|
<node-id> |
Enter node id. Number range from=0 to=9223372036854775807 |
Command Mode: exec : Exec Mode
Command Path:
# show discoveryissues node <NUMBER>
Description: Show dns address information
Command Mode: exec : Exec Mode
Command Path:
# show dns-address
Description: Show dns domain information
Command Mode: exec : Exec Mode
Command Path:
# show dns-domain
Description: Show Dot1q-tunnel Information
Syntax:
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show dot1q-tunnel WORD
Description: interface
Syntax:
|
switch |
switch |
|
<101-4000> |
switch ID |
Command Mode: exec : Exec Mode
Command Path:
# show dwdm interface switch <101-4000>
Description: Show IP endpoints
Syntax:
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints on an interface ethernet
Syntax:
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
ethernet [<fex>/]<slot>/<port> |
Ethernet Range |
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface port-channel
Syntax:
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Port Channel Name (Max Size 64) |
|
<101-199> |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on vpc
Syntax:
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
context |
VPC Context |
|
WORD |
First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
interface |
VPC Interface name |
|
vpc |
VPC Interface name |
|
WORD |
VPC Name (Max Size 64) |
|
fex |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show epg WORD
Description: Show detailed view of Application EPg
Syntax:
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show epg WORD detail
Description: Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show esg WORD
Description: Show detailed view of Endpoint Security Group
Syntax:
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show esg WORD detail
Description: Show event information
Syntax:
|
<event-code> |
(Optional) Event code |
|
<event-ID> |
(Optional) Event ID |
|
<event-value> |
(Optional) Cause |
|
last-minutes <num-minutes> |
(Optional) Event activity in time interval. Number range from=1 to=59 |
|
last-hours <num-hours> |
(Optional) Event activity in time interval. Number range from=1 to=23 |
|
last-days <num-days> |
(Optional) Event activity in time interval. Number range from=1 to=999 |
|
start-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
end-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Event activity in time interval |
|
detail |
(Optional) Detailed event information |
|
<scope> |
command scope |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller
Description: Detailed controller information
Syntax:
|
node-id |
(Optional) Optional Serial number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]
Description: Show command for leaf
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>
Description: Show extended chassis information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>
Description: Fibre Channel Protocol
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface fc <phyInt>
Description: FC Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface fcportchannel <portChan>
Description: L3 instance
Syntax:
|
<leafId> |
Leaf id |
|
<l3Inst> |
<L3 instance number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>
Description: Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>
Description: Tunnel Interface
Syntax:
|
<leafId> |
Leaf id |
|
<tunnelPort> |
<Tunnel interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>
Description: vethernet ID
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface vethernet <phyInt>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>
Description: Show information for fabric port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<fabPort> |
pls enter the fabric port number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for leaf port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<leafPort> |
pls enter the leaf port number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>
Description: Show command for protocol
Syntax:
|
<leafId> |
Leaf id |
|
<protName> |
Protocol name |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>
Description: Virtual port channel information
Syntax:
|
<leafId> |
Leaf id |
|
<vpcPort> |
pls enter virtual port channel number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>
Description: Vrf information
Syntax:
|
<leafId> |
Leaf id |
|
<vrfPort> |
pls enter vrf name |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>
Description: Show command for spine
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>
Description: L3 instance
Syntax:
|
<leafId> |
Leaf id |
|
<l3Inst> |
<L3 instance number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>
Description: Tunnel Interface
Syntax:
|
<leafId> |
Leaf id |
|
<tunnelPort> |
<Tunnel interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis
Description: Show information for fabric module
Syntax:
|
<leafId> |
Leaf id |
|
<fcMod> |
pls enter the fabric module number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>
Description: Show information for fabric port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<fabPort> |
pls enter the fabric port number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>
Description: Show information for system module
Syntax:
|
<leafId> |
Leaf id |
|
<sysMod> |
pls enter the system module number |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>
Description: Show command for protocol
Syntax:
|
<leafId> |
Leaf id |
|
<protName> |
Protocol name |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>
Description: Vrf information
Syntax:
|
<leafId> |
Leaf id |
|
<vrfPort> |
pls enter vrf name |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>
Description: Show Tenants Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Description: Show Application Profiles Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Description: Show Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD esg WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show Dns Server Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD
Description: Show Dns Server Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD server WORD
Description: Show Dns Domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
|
WORD |
Domain we eventually want to filter on (Max Size 512) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD server WORD domain WORD
Description: Show IP endpoints
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints on an interface ethernet
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
ethernet [<fex>/]<slot>/<port> |
Ethernet Range |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface port-channel
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Port Channel Name (Max Size 64) |
|
<101-199> |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on vpc
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
context |
VPC Context |
|
WORD |
First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
interface |
VPC Interface name |
|
vpc |
VPC Interface name |
|
WORD |
VPC Name (Max Size 64) |
|
fex |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show multicast route-maps per Tenant
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Description: Show VRF Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Description: L2 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flowi stats |
|
vlan |
vlan info |
|
<vlan> |
<vlan>. Number range from=0 to=9223372036854775807 |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L3 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flow stats |
|
srcpctag |
source pc tag |
|
<srcpctag> |
<srcpctag> |
|
dstpctag |
destination pc tag |
|
<dstpctag> |
<dstpctag> |
|
srcepgname |
source epg name |
|
<srcepgname> |
<srcepgname> |
|
dstepgname |
destination epg name |
|
<dstepgname> |
<dstepgname> |
|
srcip |
source ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
dstip |
destination ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
proto |
protocol |
|
<proto> |
<proto> |
|
srcport |
source port |
|
<srcport> |
<srcport> |
|
dstport |
destination port |
|
<dstport> |
<dstport> |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcpctag <srcpctag> dstpctag <dstpctag> srcepgname <srcepgname> dstepgname <dstepgname> srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: Show detailed view of VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Description: Show command for BGP peers
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<101-4000> |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: Show external l3 EIGRP
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show command for external-l3 epgs
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Description: Show command for external-l3 route-map
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<l3out name> |
(Optional) Name of the route-map to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]
Description: Show external-l3 route-map in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<l3out name> |
(Optional) Name of the route-map to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail
Description: scale command
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 scale
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 scale detail
Description: Show command for external-l3 static routes
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail
Description: Show ipv6 multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD ipv6multicast
Description: Show multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Description: Show command for external-l2 epgs
Command Mode: exec : Exec Mode
Command Path:
# show external-l2 epg
Description: EPG name to filter on
Syntax:
|
WORD |
Name of the EPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l2 epg name WORD
Description: tenant to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l2 epg tenant WORD
Description: Show command for BGP peers
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp
Description: tenant to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp tenant <WORD>
Description: vrf to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp tenant <WORD> vrf WORD
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<101-4000> |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 bgp tenant <WORD> vrf WORD node <101-4000>
Description: Show command for external-l3 eigrp
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp
Description: Show interanl details
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp detail
Description: Node(s) to filter on
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp node <101-4000>
Description: Show interanl details
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp node <101-4000> detail
Description: Tenant(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD>
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> detail
Description: Vrf(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD detail
Description: Node(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail
Description: Show command for external-l3 epgs
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg
Description: external-l3 epg in detail with operational status
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg detail
Description: EPG name to filter on
Syntax:
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg name <epgName>
Description: external-l3 epg in detail with operational status
Syntax:
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg name <epgName> detail
Description: tenant to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD>
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD> detail
Description: vrf to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD> vrf WORD
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 epg tenant <WORD> vrf WORD detail
Description: Show command for external-l3 interfaces
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces
Description: Show interfaces details
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces detail
Description: Node(s) to filter on
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces node <101-4000>
Description: Show interfaces details
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces node <101-4000> detail
Description: Tenant(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD>
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> detail
Description: Vrf(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD detail
Description: Node(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail
Description: Show command for external-l3 ospf
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf
Description: Show internal details
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf detail
Description: Node(s) to filter on
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf node <101-4000>
Description: Show internal details
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf node <101-4000> detail
Description: Tenant(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD>
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> detail
Description: Vrf(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD detail
Description: Node(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000>
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail
Description: Show command for external-l3 route-map
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map
Description: Route-map in detail with operational status
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map detail
Description: Route-map name to filter on
Syntax:
|
<l3out name> |
Name of the route-map to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map name <l3out name>
Description: Route-map in detail with operational status
Syntax:
|
<l3out name> |
Name of the route-map to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map name <l3out name> detail
Description: tenant to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD>
Description: Route-map in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> detail
Description: vrf to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD
Description: Route-map in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD node
Description: Route-map in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 route-map tenant <WORD> vrf WORD node detail
Description: Show command for external-l3 scale
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale
Description: Show scale details
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale detail
Description: Node(s) to filter on
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale node <101-4000>
Description: Show scale details
Syntax:
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale node <101-4000> detail
Description: Tenant(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale tenant <WORD>
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale tenant <WORD> detail
Description: Vrf(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale tenant <WORD> vrf WORD
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale tenant <WORD> vrf WORD detail
Description: Node(s) to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale tenant <WORD> vrf WORD node <101-4000>
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF(s) to filter on (Max Size 64) |
|
<101-4000> |
Node Range or Node Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 scale tenant <WORD> vrf WORD node <101-4000> detail
Description: Show command for external-l3 static routes
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route
Description: static-route in detail with operational status
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route detail
Description: node to filter on
Syntax:
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route node
Description: static-route in detail with operational status
Syntax:
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route node detail
Description: tenant to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD>
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> detail
Description: vrf to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD node
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show external-l3 static-route tenant <WORD> vrf WORD node detail
Description: Show health of fabric discovery
Command Mode: exec : Exec Mode
Command Path:
# show fabric-discovery-health
Description: To show the recovery checker status
Syntax:
|
moDn |
Optional Dn |
|
detail |
(Optional) detail |
Command Mode: exec : Exec Mode
Command Path:
# show fabric-recovery checker moDn [detail]
Description: Show fabric recovery status
Command Mode: exec : Exec Mode
Command Path:
# show fabric-recovery status
Description: Show fault information
Syntax:
|
history |
(Optional) Historical information |
|
<fault-code> |
(Optional) Fault code |
|
<fault-ID> |
(Optional) Fault ID |
|
<yes/no> |
(Optional) Acknowledgment status |
|
<lc-state> |
(Optional) Lifecycle state |
|
<severity-value> |
(Optional) Severity |
|
<severity-value> |
(Optional) Minimum severity |
|
<fault-type> |
(Optional) Type |
|
<fault-value> |
(Optional) Cause |
|
last-minutes <num-minutes> |
(Optional) Fault activity in time interval. Number range from=1 to=59 |
|
last-hours <num-hours> |
(Optional) Fault activity in time interval. Number range from=1 to=23 |
|
last-days <num-days> |
(Optional) Fault activity in time interval. Number range from=1 to=999 |
|
start-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Fault activity in time interval |
|
end-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Fault activity in time interval |
|
detail |
(Optional) Detailed faults information |
|
<scope> |
command scope |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller
Description: Detailed controller information
Syntax:
|
node-id |
(Optional) Optional Serial number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]
Description: Show L4 L7 Device information
Syntax:
|
Tenant Name |
(Optional) Name of Tenant |
|
Device Cluster Name |
(Optional) Name of Device |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]
Description: Show L4 L7 Graph information
Syntax:
|
<Tenant Name> |
(Optional) Name of Tenant |
|
<Graph Name> |
(Optional) Name of Graph |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]
Description: Show command for leaf
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>
Description: Show extended chassis information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>
Description: Fibre Channel Protocol
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface fc <phyInt>
Description: FC Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface fcportchannel <portChan>
Description: L3 instance
Syntax:
|
<leafId> |
Leaf id |
|
<l3Inst> |
<L3 instance number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>
Description: Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>
Description: Tunnel Interface
Syntax:
|
<leafId> |
Leaf id |
|
<tunnelPort> |
<Tunnel interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>
Description: vethernet ID
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface vethernet <phyInt>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>
Description: Show information for fabric port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<fabPort> |
pls enter the fabric port number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for leaf port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<leafPort> |
pls enter the leaf port number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>
Description: Show command for protocol
Syntax:
|
<leafId> |
Leaf id |
|
<protName> |
Protocol name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>
Description: Virtual port channel information
Syntax:
|
<leafId> |
Leaf id |
|
<vpcPort> |
pls enter virtual port channel number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>
Description: Vrf information
Syntax:
|
<leafId> |
Leaf id |
|
<vrfPort> |
pls enter vrf name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>
Description: Show Microsoft domain information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain
Description: Microsoft domain name
Syntax:
|
WORD |
Microsoft domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD>
Description: Show Microsoft Hypervisor information
Syntax:
|
WORD |
Microsoft domain name |
|
WORD |
HyperV hostname |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> hyperv <WORD>
Description: Show Microsoft port group information
Syntax:
|
WORD |
Microsoft domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> port-group
Description: Show Microsoft SCVMM information
Syntax:
|
WORD |
Microsoft domain name |
|
<hostname|ip> |
SCVMM hostname or IP |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> scvmm <hostname|ip>
Description: Show Microsoft VM information
Syntax:
|
WORD |
Microsoft domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm
Description: Show detailed Microsoft VM information
Syntax:
|
WORD |
Microsoft domain name |
|
WORD |
VM Name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm name <WORD>
Description: Show Quotas Information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] quota
Description: Show Redhat domain information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] redhat domain
Description: Redhat domain name
Syntax:
|
<name> |
Redhat domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] redhat domain name <name>
Description: Show Redhat domain EPG details
Syntax:
|
<name> |
Redhat domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] redhat domain name <name> epg
Description: RHEV ip or hostname
Syntax:
|
<name> |
Redhat domain name |
|
<hostname|ip> |
rhev hostname or IP |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] redhat domain name <name> rhev <hostname|ip>
Description: Show command for spine
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>
Description: L3 instance
Syntax:
|
<leafId> |
Leaf id |
|
<l3Inst> |
<L3 instance number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>
Description: Tunnel Interface
Syntax:
|
<leafId> |
Leaf id |
|
<tunnelPort> |
<Tunnel interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis
Description: Show information for fabric module
Syntax:
|
<leafId> |
Leaf id |
|
<fcMod> |
pls enter the fabric module number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>
Description: Show information for fabric port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<fabPort> |
pls enter the fabric port number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>
Description: Show information for system module
Syntax:
|
<leafId> |
Leaf id |
|
<sysMod> |
pls enter the system module number |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>
Description: Show command for protocol
Syntax:
|
<leafId> |
Leaf id |
|
<protName> |
Protocol name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>
Description: Vrf information
Syntax:
|
<leafId> |
Leaf id |
|
<vrfPort> |
pls enter vrf name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>
Description: Show Tenants Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD
Description: Show Application Profiles Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD
Description: Show Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD esg WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show Dns Server Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD
Description: Show Dns Server Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD server WORD
Description: Show Dns Domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
|
WORD |
Domain we eventually want to filter on (Max Size 512) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD dnsservergroup WORD server WORD domain WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show multicast route-maps per Tenant
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps
Description: Show VRF Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD
Description: L2 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flowi stats |
|
vlan |
vlan info |
|
<vlan> |
<vlan>. Number range from=0 to=9223372036854775807 |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L3 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flow stats |
|
srcpctag |
source pc tag |
|
<srcpctag> |
<srcpctag> |
|
dstpctag |
destination pc tag |
|
<dstpctag> |
<dstpctag> |
|
srcepgname |
source epg name |
|
<srcepgname> |
<srcepgname> |
|
dstepgname |
destination epg name |
|
<dstepgname> |
<dstepgname> |
|
srcip |
source ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
dstip |
destination ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
proto |
protocol |
|
<proto> |
<proto> |
|
srcport |
source port |
|
<srcport> |
<srcport> |
|
dstport |
destination port |
|
<dstport> |
<dstport> |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcpctag <srcpctag> dstpctag <dstpctag> srcepgname <srcepgname> dstepgname <dstepgname> srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: Show detailed view of VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail
Description: Show command for BGP peers
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<101-4000> |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: Show external l3 EIGRP
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show command for external-l3 epgs
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail
Description: scale command
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 scale
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 scale detail
Description: Show command for external-l3 static routes
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail
Description: Show ipv6 multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD ipv6multicast
Description: Show multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast
Description: Show VMware domain information
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain
Description: VMware domain name
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name>
Description: Show VMware domain EPG details
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> epg
Description: Show VMware ESX information
Syntax:
|
<name> |
VMware domain name |
|
<esx-ip> |
ESX IP |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> esx <esx-ip>
Description: Show VMware port group information
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> port-group
Description: Show VMware domain trunk portgroup details
Syntax:
|
<name> |
VMware domain name |
|
<name> |
(Optional) trunk portgroup name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> trunk-portgroup [name <name>]
Description: VMware vCenter ip or hostname
Syntax:
|
<name> |
VMware domain name |
|
<hostname|ip> |
vCenter hostname or IP |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vcenter <hostname|ip>
Description: Show VMware VM information
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm
Description: Show detailed VMware VM information
Syntax:
|
<name> |
VMware domain name |
|
<vm-name> |
VM Name |
Command Mode: exec : Exec Mode
Command Path:
# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm name <vm-name>
Description: Show FIPS information
Command Mode: exec : Exec Mode
Command Path:
# show fips
Description: Show FIPS status
Command Mode: exec : Exec Mode
Command Path:
# show fips status
Description: compatibility matrix for desired version
Syntax:
|
WORD |
Desired Controller Version |
Command Mode: exec : Exec Mode
Command Path:
# show firmware compat matrix <WORD>
Description: Show firmware images present in repository
Command Mode: exec : Exec Mode
Command Path:
# show firmware repository
Description: Detailed repository information
Command Mode: exec : Exec Mode
Command Path:
# show firmware repository detail
Description: scheduler status information
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade scheduler-status
Description: Scheduler status for desired switch group
Syntax:
|
WORD |
Scheduler status for desired switch group |
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade scheduler-status switch-group <WORD>
Description: Upgrade status of all controllers and switches
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status
Description: Controller-group upgrade status
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status controller-group
Description: Detailed upgrade status
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status controller-group detail
Description: Detailed upgrade status information
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status detail
Description: standby-apic upgrade status
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status standby-apic
Description: Detailed standby-apic upgrade status
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status standby-apic detail
Description: Switch-group upgrade status
Syntax:
|
WORD |
switch-group name (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status switch-group <WORD>
Description: Detailed upgrade status
Syntax:
|
WORD |
switch-group name (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show firmware upgrade status switch-group <WORD> detail
Description: Show Netflow exporter information
Command Mode: exec : Exec Mode
Command Path:
# show flow exporter
Description: Show flow exporter infra information
Syntax:
|
WORD |
Exporter Name |
|
detail |
(Optional) detail |
Command Mode: exec : Exec Mode
Command Path:
# show flow exporter infra WORD [detail]
Description: Show flow exporter tenant information
Syntax:
|
WORD |
Optional tenant name |
|
WORD |
Exporter Name |
|
detail |
(Optional) detail |
Command Mode: exec : Exec Mode
Command Path:
# show flow exporter tenant <WORD> WORD [detail]
Description: Show Netflow Monitor Information
Command Mode: exec : Exec Mode
Command Path:
# show flow monitor
Description: Show Netflow Monitor Information for infra
Syntax:
|
WORD |
Optional Monitor Name |
|
detail |
(Optional) detail |
Command Mode: exec : Exec Mode
Command Path:
# show flow monitor infra WORD [detail]
Description: Show Netflow Monitor Information for the specified tenant
Syntax:
|
WORD |
Specify tenant name |
|
WORD |
Optional Monitor Name |
|
detail |
(Optional) detail |
Command Mode: exec : Exec Mode
Command Path:
# show flow monitor tenant <WORD> WORD [detail]
Description: Show Netflow Node Policy Information
Syntax:
|
WORD |
(Optional) Optional Node Policy Name |
Command Mode: exec : Exec Mode
Command Path:
# show flow node-policy [name <WORD>]
Description: Show Netflow Node Policy Detailed Information
Syntax:
|
WORD |
(Optional) Optional Node Policy Name |
Command Mode: exec : Exec Mode
Command Path:
# show flow node-policy [name <WORD>] detail
Description: Show Netflow record information
Command Mode: exec : Exec Mode
Command Path:
# show flow record
Description: Show flow record infra information
Syntax:
|
WORD |
Record Name |
|
detail |
(Optional) detail |
Command Mode: exec : Exec Mode
Command Path:
# show flow record infra WORD [detail]
Description: Show flow record tenant information
Syntax:
|
recordName |
(Optional) Optional record name |
|
tenantName |
Optional tenant name |
|
WORD |
Record Name |
|
detail |
(Optional) detail |
Command Mode: exec : Exec Mode
Command Path:
# show flow record tenant [record-name <recordName>] <tenantName> WORD [detail]
Description: Show NetFlow Exporter information for VM Networking
Syntax:
|
WORD |
NetFlow Exporter Name |
Command Mode: exec : Exec Mode
Command Path:
# show flow vm-exporter WORD
Description: Show health score information
Syntax:
|
history |
(Optional) Historical information |
|
min-change <percentage change> |
(Optional) Minimum change in health score percentage. Number range from=-100 to=9999 |
|
max-hs <maximum health-score> |
(Optional) Maximum health score. Number range from=0 to=100 |
|
start-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Health activity in time interval |
|
end-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Health activity in time interval |
|
<scope> |
command scope |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>
Description: Show command for leaf
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>
Description: Show extended chassis information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet <phyInt>
Description: Fibre Channel Protocol
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface fc <phyInt>
Description: FC Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface fcportchannel <portChan>
Description: L3 instance
Syntax:
|
<leafId> |
Leaf id |
|
<l3Inst> |
<L3 instance number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance <l3Inst>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt <mgmtPort>
Description: Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface portchannel <portChan>
Description: Tunnel Interface
Syntax:
|
<leafId> |
Leaf id |
|
<tunnelPort> |
<Tunnel interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel <tunnelPort>
Description: vethernet ID
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface vethernet <phyInt>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot>
Description: Show information for fabric port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<fabPort> |
pls enter the fabric port number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show information for leaf port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<leafPort> |
pls enter the leaf port number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> leafport <leafPort>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor <supMod>
Description: Show command for protocol
Syntax:
|
<leafId> |
Leaf id |
|
<protName> |
Protocol name |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>
Description: Virtual port channel information
Syntax:
|
<leafId> |
Leaf id |
|
<vpcPort> |
pls enter virtual port channel number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>
Description: Vrf information
Syntax:
|
<leafId> |
Leaf id |
|
<vrfPort> |
pls enter vrf name |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vrf <vrfPort>
Description: Show command for spine
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface ethernet <phyInt>
Description: L3 instance
Syntax:
|
<leafId> |
Leaf id |
|
<l3Inst> |
<L3 instance number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface l3instance <l3Inst>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface mgmt <mgmtPort>
Description: Tunnel Interface
Syntax:
|
<leafId> |
Leaf id |
|
<tunnelPort> |
<Tunnel interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface tunnel <tunnelPort>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory chassis
Description: Show information for fabric module
Syntax:
|
<leafId> |
Leaf id |
|
<fcMod> |
pls enter the fabric module number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fabric <fcMod>
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fans <ftSlot>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot>
Description: Show information for fabric port
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
|
<fabPort> |
pls enter the fabric port number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot> fabricport <fabPort>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory supervisor <supMod>
Description: Show information for system module
Syntax:
|
<leafId> |
Leaf id |
|
<sysMod> |
pls enter the system module number |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory system <sysMod>
Description: Show command for protocol
Syntax:
|
<leafId> |
Leaf id |
|
<protName> |
Protocol name |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> protocol <protName>
Description: Vrf information
Syntax:
|
<leafId> |
Leaf id |
|
<vrfPort> |
pls enter vrf name |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> vrf <vrfPort>
Description: Show Tenants Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD
Description: Show Application Profiles Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD epg WORD
Description: Show Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD esg WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show Dns Server Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD dnsservergroup WORD
Description: Show Dns Server Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD dnsservergroup WORD server WORD
Description: Show Dns Domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
|
WORD |
Domain we eventually want to filter on (Max Size 512) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD dnsservergroup WORD server WORD domain WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show multicast route-maps per Tenant
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD multicast-route-maps
Description: Show VRF Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD
Description: L2 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flowi stats |
|
vlan |
vlan info |
|
<vlan> |
<vlan>. Number range from=0 to=9223372036854775807 |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L3 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flow stats |
|
srcpctag |
source pc tag |
|
<srcpctag> |
<srcpctag> |
|
dstpctag |
destination pc tag |
|
<dstpctag> |
<dstpctag> |
|
srcepgname |
source epg name |
|
<srcepgname> |
<srcepgname> |
|
dstepgname |
destination epg name |
|
<dstepgname> |
<dstepgname> |
|
srcip |
source ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
dstip |
destination ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
proto |
protocol |
|
<proto> |
<proto> |
|
srcport |
source port |
|
<srcport> |
<srcport> |
|
dstport |
destination port |
|
<dstport> |
<dstport> |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcpctag <srcpctag> dstpctag <dstpctag> srcepgname <srcepgname> dstepgname <dstepgname> srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: Show detailed view of VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD detail
Description: Show command for BGP peers
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<101-4000> |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: Show external l3 EIGRP
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show command for external-l3 epgs
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName>
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf detail
Description: scale command
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 scale
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 scale detail
Description: Show command for external-l3 static routes
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node detail
Description: Show ipv6 multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD ipv6multicast
Description: Show multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD multicast
Description: Show inband mgmt epgs on all the nodes
Command Mode: exec : Exec Mode
Command Path:
# show inband-mgmt
Description: show inband mgmt epgs on the controller
Syntax:
|
<controller-id> |
|
|
WORD |
(Optional) Epg Name of conusmer epg |
Command Mode: exec : Exec Mode
Command Path:
# show inband-mgmt controller <controller-id> [epg <WORD>]
Description: Show inband mgmt epgs on the node
Syntax:
|
<switch-id> |
|
|
WORD |
(Optional) Epg Name |
Command Mode: exec : Exec Mode
Command Path:
# show inband-mgmt switch <switch-id> [epg <WORD>]
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show interface bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show ip interface bridge-domain WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show ipv6 interface bridge-domain WORD
Description: Show L4 L7 Device information
Syntax:
|
Tenant Name |
(Optional) Name of Tenant |
|
Device Cluster Name |
(Optional) Name of Device |
Command Mode: exec : Exec Mode
Command Path:
# show l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]
Description: Show L4 L7 Graph information
Syntax:
|
<Tenant Name> |
(Optional) Name of Tenant |
|
<Graph Name> |
(Optional) Name of Graph |
Command Mode: exec : Exec Mode
Command Path:
# show l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]
Description: Show L4-L7 package information
Command Mode: exec : Exec Mode
Command Path:
# show l4l7-package
Description: Show LDAP server information
Command Mode: exec : Exec Mode
Command Path:
# show ldap-server
Description: Show license all
Command Mode: exec : Exec Mode
Command Path:
# show license all
Description: Show license catalog
Command Mode: exec : Exec Mode
Command Path:
# show license catalog
Description: Show license hostname
Syntax:
|
privacy |
privacy |
Command Mode: exec : Exec Mode
Command Path:
# show license hostname privacy
Description: Display the license interval
Command Mode: exec : Exec Mode
Command Path:
# show license interval
Description: Show license status
Command Mode: exec : Exec Mode
Command Path:
# show license status
Description: Show license summary
Command Mode: exec : Exec Mode
Command Path:
# show license summary
Description: Show license tech support
Syntax:
|
support |
techsupport |
Command Mode: exec : Exec Mode
Command Path:
# show license tech support
Description: Displaying smart licensing transport mode
Command Mode: exec : Exec Mode
Command Path:
# show license transport-mode
Description: Display device udi
Command Mode: exec : Exec Mode
Command Path:
# show license udi
Description: Show license usage
Command Mode: exec : Exec Mode
Command Path:
# show license usage
Description: Show lldp neighbor information
Command Mode: exec : Exec Mode
Command Path:
# show lldp
Description: Show command for locator-led
Syntax:
|
status |
locator-led status |
Command Mode: exec : Exec Mode
Command Path:
# show locator-led status
Description: Leaf to filter on
Syntax:
|
status |
locator-led status |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show locator-led status leaf
Description: Spine to filter on
Syntax:
|
status |
locator-led status |
|
arg |
Spine Range or Spine Name List |
Command Mode: exec : Exec Mode
Command Path:
# show locator-led status spine
Description: interface
Syntax:
|
switch |
switch |
|
<101-4000> |
switch ID |
Command Mode: exec : Exec Mode
Command Path:
# show macsec interface switch <101-4000>
Description: Show macsec policies
Syntax:
|
WORD |
Node Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
Command Mode: exec : Exec Mode
Command Path:
# show macsec policy <WORD>
Description: Show Microsoft domain information
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain
Description: Microsoft domain name
Syntax:
|
WORD |
Microsoft domain name |
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD>
Description: Show Microsoft Hypervisor information
Syntax:
|
WORD |
Microsoft domain name |
|
WORD |
HyperV hostname |
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> hyperv <WORD>
Description: Show Microsoft port group information
Syntax:
|
WORD |
Microsoft domain name |
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> port-group
Description: Show Microsoft SCVMM information
Syntax:
|
WORD |
Microsoft domain name |
|
<hostname|ip> |
SCVMM hostname or IP |
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> scvmm <hostname|ip>
Description: Show Microsoft VM information
Syntax:
|
WORD |
Microsoft domain name |
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> vm
Description: Show detailed Microsoft VM information
Syntax:
|
WORD |
Microsoft domain name |
|
WORD |
VM Name |
Command Mode: exec : Exec Mode
Command Path:
# show microsoft domain name <WORD> vm name <WORD>
Description: Show Microsoft VM information
Syntax:
|
WORD |
(Optional) Specify a VM name |
|
A.B.C.D |
(Optional) Specify a VM IP address |
|
AA:BB:CC:DD:EE:FF |
(Optional) Specify a VM MAC address |
Command Mode: exec : Exec Mode
Command Path:
# show microsoft vm [name <WORD>] [ip <A.B.C.D>] [mac <AA:BB:CC:DD:EE:FF>]
Description: Show monitor session/filter-group for access interfaces
Command Mode: exec : Exec Mode
Command Path:
# show monitor access
Description: Show monitor filter-group for access interfaces
Syntax:
|
filter-group_name |
filter-group name |
Command Mode: exec : Exec Mode
Command Path:
# show monitor access filter-group filter-group_name
Description: Show monitor session for access interfaces
Syntax:
|
session_name |
session name |
Command Mode: exec : Exec Mode
Command Path:
# show monitor access session session_name
Description: Show monitor session/filter-group for fabric interfaces
Command Mode: exec : Exec Mode
Command Path:
# show monitor fabric
Description: Show monitor filter-group for fabric interfaces
Syntax:
|
filter-group_name |
filter-group name |
Command Mode: exec : Exec Mode
Command Path:
# show monitor fabric filter-group filter-group_name
Description: Show monitor session for fabric interfaces
Syntax:
|
session_name |
session name |
Command Mode: exec : Exec Mode
Command Path:
# show monitor fabric session session_name
Description: Show brief summary of all non-virtual monitor sessions
Command Mode: exec : Exec Mode
Command Path:
# show monitor summary
Description: Show monitor session for tenant
Syntax:
|
tenant_name |
tenant |
|
session |
session |
|
session_name |
session name |
Command Mode: exec : Exec Mode
Command Path:
# show monitor tenant <tenant_name> session session_name
Description: Show monitor session for virtual switches
Syntax:
|
session |
session |
|
WORD |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show monitor virtual session WORD
Description: Show corresponding tenants for Alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD
Description: Show Acl Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the Acl Alias to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD acl WORD
Description: Show Application Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the application Alias to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD application WORD
Description: Show EndPoint Group Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the application Alias to filter on (Max Size 64) |
|
WORD |
Name of the epg Alias to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD application WORD epg WORD
Description: Show Bridge-Domain Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain Alias to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD bridge-domain WORD
Description: Show Contract Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the contract Alias to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD contract WORD
Description: Show Subject Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the contract Alias to filter on (Max Size 64) |
|
WORD |
Name of the Subject Alias to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD contract WORD subject WORD
Description: Show L3out Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the L3out Alias to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD l3out WORD
Description: Show Vrf Name for alias
Syntax:
|
WORD |
Name of the tenant Alias to filter on (Max Size 63) |
|
WORD |
Name of the vrf Alias to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show name-alias tenant WORD vrf WORD
Description: Show ntpq information
Command Mode: exec : Exec Mode
Command Path:
# show ntpq
Description: Show Out of band Information
Command Mode: exec : Exec Mode
Command Path:
# show oob-mgmt
Description: Show oob mgmt epgs on the controller, enter one
Syntax:
|
<controller-id> |
|
|
WORD |
(Optional) Epg Name of conusmer epg |
Command Mode: exec : Exec Mode
Command Path:
# show oob-mgmt controller <controller-id> [epg <WORD>]
Description: Show oob mgmt epgs on the node, enter one
Syntax:
|
<switch-id> |
|
|
WORD |
(Optional) Epg Name of conusmer epg |
Command Mode: exec : Exec Mode
Command Path:
# show oob-mgmt switch <switch-id> [epg <WORD>]
Description: Show policydist shard recovery from policymgr shards status
Command Mode: exec : Exec Mode
Command Path:
# show pd-recovery status
Description: Show policy maps
Command Mode: exec : Exec Mode
Command Path:
# show policy-map
Description: Data-plane type policy-map(s)
Syntax:
|
infra |
Global data-plane policy-map(s) |
|
WORD |
data-plane type policy-map(s) (Max Size 64) |
|
stats |
(Optional) Data-Plane Policer Statistics, where available |
Command Mode: exec : Exec Mode
Command Path:
# show policy-map type data-plane infra WORD [stats]
Description: QOS type policy-map(s)
Syntax:
|
WORD |
QOS type policy-map(s) (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show policy-map type qos WORD
Description: Show leaf port-channel info
Syntax:
|
WORD |
Leaf Range or Leaf Name List |
|
<port-channel-list> |
port channel names |
Command Mode: exec : Exec Mode
Command Path:
# show port-channel leaf WORD <port-channel-list>
Description: Show port-channel mapping
Syntax:
|
<port-channel-list> |
port channel names |
Command Mode: exec : Exec Mode
Command Path:
# show port-channel map <port-channel-list>
Description: Leaf
Syntax:
|
<port-channel-list> |
port channel names |
|
WORD |
Leaf Range or Leaf Name List |
|
<101-199> |
(Optional) Fex ID |
Command Mode: exec : Exec Mode
Command Path:
# show port-channel map <port-channel-list> leaf WORD [fex <101-199>]
Description: Show Password Rules
Command Mode: exec : Exec Mode
Command Path:
# show pwd-rules
Description: Show Quotas Information
Command Mode: exec : Exec Mode
Command Path:
# show quota
Description: Show RADIUS server information
Command Mode: exec : Exec Mode
Command Path:
# show radius-server
Description: Show Redhat domain information
Command Mode: exec : Exec Mode
Command Path:
# show redhat domain
Description: Redhat domain name
Syntax:
|
<name> |
Redhat domain name |
Command Mode: exec : Exec Mode
Command Path:
# show redhat domain name <name>
Description: Show Redhat domain EPG details
Syntax:
|
<name> |
Redhat domain name |
Command Mode: exec : Exec Mode
Command Path:
# show redhat domain name <name> epg
Description: RHEV ip or hostname
Syntax:
|
<name> |
Redhat domain name |
|
<hostname|ip> |
rhev hostname or IP |
Command Mode: exec : Exec Mode
Command Path:
# show redhat domain name <name> rhev <hostname|ip>
Description: Show resource information
Syntax:
|
conflict |
show resource conflicts in APIC |
|
encap-vlan |
show resource conflicts of encap-vlan in APIC |
Command Mode: exec : Exec Mode
Command Path:
# show resource conflict encap-vlan
Description: Epg Name
Syntax:
|
conflict |
show resource conflicts in APIC |
|
encap-vlan |
show resource conflicts of encap-vlan in APIC |
|
WORD |
Epg Name |
Command Mode: exec : Exec Mode
Command Path:
# show resource conflict encap-vlan epg <WORD>
Description: Node ID
Syntax:
|
conflict |
show resource conflicts in APIC |
|
encap-vlan |
show resource conflicts of encap-vlan in APIC |
|
WORD |
Epg Name |
|
<101-4000> |
Leaf ID |
Command Mode: exec : Exec Mode
Command Path:
# show resource conflict encap-vlan epg <WORD> node <101-4000>
Description: Show information about AAA Roles
Command Mode: exec : Exec Mode
Command Path:
# show role
Description: Show RSA server information
Command Mode: exec : Exec Mode
Command Path:
# show rsa-server
Description: Show running configuration
Syntax:
|
all |
(Optional) Show running-config with defaults |
|
<scope> |
command scope |
Command Mode: exec : Exec Mode
Command Path:
# show running-config [all] <scope>
Description: Show session-log information
Syntax:
|
<log-id> |
(Optional) Log ID |
|
action<action-type> |
(Optional) Object action indicator |
|
<user-name> |
(Optional) Name of user |
|
<num-minutes> |
(Optional) Logs created in time interval. Number range from 1 to 59 |
|
<num-hours> |
(Optional) Logs created in time interval. Number range from 1 to 23 |
|
<num-days> |
(Optional) Logs created in time interval. Number range from 1 to 999 |
|
<YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Logs created in time interval |
|
end-time <YYYY-MM-DDTHR:MIN:SEC> |
(Optional) Logs created in time interval |
|
detail |
(Optional) Detailed session-log information. Displays the action trigger that shows why a login occurred. |
|
<scope> |
command scope |
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>
Description: Show controller information
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller
Description: Detailed controller information
Syntax:
|
node-id |
(Optional) Optional Serial number |
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]
Description: Show command for leaf
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>
Description: Show command for spine
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>
Description: Show command for active snapshot job
Syntax:
|
job |
View active snapshot job |
Command Mode: exec : Exec Mode
Command Path:
# show snapshot active job
Description: Show command for snapshot files
Command Mode: exec : Exec Mode
Command Path:
# show snapshot files
Description: Show command for snapshot jobs
Syntax:
|
WORD |
Snapshot policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snapshot jobs <WORD>
Description: Show snmp policy information
Syntax:
|
policy |
(Optional) SNMP policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>]
Description: Show snmp client group policies
Syntax:
|
policy |
(Optional) SNMP policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] clientgroups
Description: Show snmp community information
Syntax:
|
policy |
(Optional) SNMP policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] community
Description: Show snmp v3 engine-id
Syntax:
|
policy |
(Optional) SNMP policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] engineid
Description: Show snmp trap hosts
Syntax:
|
policy |
(Optional) SNMP policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] hosts
Description: Show snmp summary
Syntax:
|
policy |
(Optional) SNMP policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] summary
Description: Show snmp v3 users
Syntax:
|
policy |
(Optional) SNMP policy name |
Command Mode: exec : Exec Mode
Command Path:
# show snmp [policy <policy>] users
Description: Show statistics
Syntax:
|
granularity |
Choose granularity value |
|
<granularity-value> |
<granularity-value> |
|
history |
(Optional) historical stats information |
|
cumulative |
(Optional) cumulative stats information |
|
tenant |
command scope |
|
leaf |
command scope |
|
spine |
command scope |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant|leaf|spine
Description: Show command for nginx web-requests
Syntax:
|
node-id |
node-id |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] communication controller node-id
Description: Show command for leaf
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId>
Description: Show extended chassis information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<fexNum> |
pls enter fex number |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum> module <lcSlot>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface ethernet <phyInt>
Description: Fibre Channel Protocol
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface fc <phyInt>
Description: FC Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface fcportchannel <portChan>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface mgmt <mgmtPort>
Description: Port channel interface
Syntax:
|
<leafId> |
Leaf id |
|
<portChan> |
<Port channel number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface portchannel <portChan>
Description: vethernet ID
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface vethernet <phyInt>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory chassis
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory fans <ftSlot>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory supervisor <supMod>
Description: Show command for spine
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId>
Description: Ethernet IEEE 802.3z
Syntax:
|
<leafId> |
Leaf id |
|
<phyInt> |
<slot or chassis-number/port or slot number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface ethernet <phyInt>
Description: Management interface
Syntax:
|
<leafId> |
Leaf id |
|
<mgmtPort> |
<Management interface number> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface mgmt <mgmtPort>
Description: Show inventory chassis information
Syntax:
|
<leafId> |
Leaf id |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory chassis
Description: Show information for fabric module
Syntax:
|
<leafId> |
Leaf id |
|
<fcMod> |
pls enter the fabric module number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fabric <fcMod>
Description: Show inventory fan information
Syntax:
|
<leafId> |
Leaf id |
|
<ftSlot> |
pls enter fan tray number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fans <ftSlot>
Description: Show inventory module information
Syntax:
|
<leafId> |
Leaf id |
|
<lcSlot> |
please enter the module number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory module <lcSlot>
Description: Show inventory power supply information
Syntax:
|
<leafId> |
Leaf id |
|
<psuSlot> |
pls enter the powersupply number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory powersupply <psuSlot>
Description: Show information for supervisor module
Syntax:
|
<leafId> |
Leaf id |
|
<supMod> |
pls enter the supervisor module number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory supervisor <supMod>
Description: Show information for system module
Syntax:
|
<leafId> |
Leaf id |
|
<sysMod> |
pls enter the system module number |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory system <sysMod>
Description: Show Tenants Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD
Description: Show Application Profiles Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD epg WORD
Description: Show Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD esg WORD
Description: Show Dns Server Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD dnsservergroup WORD
Description: Show Dns Server Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD dnsservergroup WORD server WORD
Description: Show Dns Domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
|
WORD |
Domain we eventually want to filter on (Max Size 512) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD dnsservergroup WORD server WORD domain WORD
Description: Show Dot1q-tunnel Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the TnlEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD dot1q-tunnel WORD
Description: Show multicast route-maps per Tenant
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD multicast-route-maps
Description: Show VRF Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD
Description: L2 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flowi stats |
|
vlan |
vlan info |
|
<vlan> |
<vlan>. Number range from=0 to=9223372036854775807 |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L3 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flow stats |
|
srcpctag |
source pc tag |
|
<srcpctag> |
<srcpctag> |
|
dstpctag |
destination pc tag |
|
<dstpctag> |
<dstpctag> |
|
srcepgname |
source epg name |
|
<srcepgname> |
<srcepgname> |
|
dstepgname |
destination epg name |
|
<dstepgname> |
<dstepgname> |
|
srcip |
source ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
dstip |
destination ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
proto |
protocol |
|
<proto> |
<proto> |
|
srcport |
source port |
|
<srcport> |
<srcport> |
|
dstport |
destination port |
|
<dstport> |
<dstport> |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcpctag <srcpctag> dstpctag <dstpctag> srcepgname <srcepgname> dstepgname <dstepgname> srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: Show detailed view of VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD detail
Description: Show command for BGP peers
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 bgp
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<101-4000> |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: Show external l3 EIGRP
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 eigrp
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 eigrp detail
Description: Show command for external-l3 epgs
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg <epgName>
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 interfaces
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 interfaces detail
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 ospf
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 ospf detail
Description: scale command
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 scale
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 scale detail
Description: Show command for external-l3 static routes
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 static-route
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 static-route detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 static-route node
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 static-route node detail
Description: Show ipv6 multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD ipv6multicast
Description: Show multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD multicast
Description: Show switch information
Command Mode: exec : Exec Mode
Command Path:
# show switch
Description: Show switch detailed information
Syntax:
|
switch-id |
(Optional) Optional switch id. Number range from=0 to=9223372036854775807 |
Command Mode: exec : Exec Mode
Command Path:
# show switch detail [id <switch-id>]
Description: Show tacacs server information
Command Mode: exec : Exec Mode
Command Path:
# show tacacs-server
Description: Techsupport status for all
Syntax:
|
status |
Status |
Command Mode: exec : Exec Mode
Command Path:
# show techsupport all status
Description: Techsupport status for controllers
Syntax:
|
status |
Status |
Command Mode: exec : Exec Mode
Command Path:
# show techsupport controllers status
Description: Techsupport status for host
Syntax:
|
<Odevid> |
Specify the host Odev ID. Number range from=0 to=9223372036854775807 |
|
status |
Status |
Command Mode: exec : Exec Mode
Command Path:
# show techsupport host <NUMBER> status
Description: Techsupport status for switch
Syntax:
|
switchId <switchId> |
switch id 101-4000 or range(s): 101-103,104 |
|
status |
Status |
Command Mode: exec : Exec Mode
Command Path:
# show techsupport switch switchId <switchId> status
Description: Show Tenants Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD
Description: Show Access-list Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the Contract to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD access-list WORD
Description: Show Application Profiles Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD
Description: Show IP endpoints
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints on an interface ethernet
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
ethernet [<fex>/]<slot>/<port> |
Ethernet Range |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface port-channel
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Port Channel Name (Max Size 64) |
|
<101-199> |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on vpc
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
context |
VPC Context |
|
WORD |
First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
interface |
VPC Interface name |
|
vpc |
VPC Interface name |
|
WORD |
VPC Name (Max Size 64) |
|
fex |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD
Description: Show detailed view of Application EPg
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD detail
Description: Show IP endpoints
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints on an interface ethernet
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
ethernet [<fex>/]<slot>/<port> |
Ethernet Range |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface port-channel
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Port Channel Name (Max Size 64) |
|
<101-199> |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on vpc
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
context |
VPC Context |
|
WORD |
First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
interface |
VPC Interface name |
|
vpc |
VPC Interface name |
|
WORD |
VPC Name (Max Size 64) |
|
fex |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Description: Show Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD esg WORD
Description: Show detailed view of Endpoint Security Group
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD esg WORD detail
Description: Show IP endpoints
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the application we eventually want to filter on (Max Size 64) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD application WORD esg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show Contracts Information Based on Type
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
whitelist (permit) or blacklist(deny) or oob-mgmt type of contract |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD contract-type WORD
Description: Show Contracts Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the Contract to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD contract WORD
Description: Show detailed view of tenant
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD detail
Description: Show Dns Server Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD dnsservergroup WORD
Description: Show Dns Server Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD dnsservergroup WORD server WORD
Description: Show Dns Domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the dns server group we eventually want to filter on (Max Size 16) |
|
WORD |
IP of server we eventually want to filter on (Max Size None) |
|
WORD |
Domain we eventually want to filter on (Max Size 512) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD dnsservergroup WORD server WORD domain WORD
Description: Show Dot1q-tunnel Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the TnlEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD dot1q-tunnel WORD
Description: Show IP endpoints
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]
Description: Show IP endpoints on an interface ethernet
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
ethernet [<fex>/]<slot>/<port> |
Ethernet Range |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>
Description: Show IP endpoints on an interface port-channel
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
WORD |
Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Port Channel Name (Max Size 64) |
|
<101-199> |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]
Description: Show IP endpoints on vpc
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
type |
(Optional) Endpoint Type |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
|
<1-4094> |
(Optional) Encapsulation Vlan. Number range from=1 to=4094 |
|
A.B.C.D |
(Optional) IP Unicast address in format i.i.i.i |
|
A:B::C:D |
(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx |
|
context |
VPC Context |
|
WORD |
First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
WORD |
Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807 |
|
interface |
VPC Interface name |
|
vpc |
VPC Interface name |
|
WORD |
VPC Name (Max Size 64) |
|
fex |
(Optional) Fex Id. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]
Description: Show Application EPG Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD epg WORD
Description: Show detailed view of Application EPg
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the AEPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD epg WORD detail
Description: Show Endpoint Security Group Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD esg WORD
Description: Show detailed view of Endpoint Security Group
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the ESG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD esg WORD detail
Description: Show command for external-l2 epgs
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the EPG to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD external-l2 epg WORD
Description: Show Bridge-domain Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD
Description: Show Bridge-domain Detailed Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD detail
Description: Show Bridge-domain Binding Table Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD first-hop-security binding-table
Description: Show Bridge-domain First Hop Security ARP Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD first-hop-security statistics arp
Description: Show Bridge-domain First Hop Security DHCPv4 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv4
Description: Show Bridge-domain First Hop Security DHCPv6 Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD first-hop-security statistics dhcpv6
Description: Show Bridge-domain First Hop Security Neighbor Discovery Statistics
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD interface bridge-domain WORD first-hop-security statistics neighbor-discovery
Description: Show command for IP properties on interface BD
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD ip interface bridge-domain WORD
Description: Show command for IP properties on interface BD
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the bridge-domain (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD ipv6 interface bridge-domain WORD
Description: Show multicast route-maps per Tenant
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD multicast-route-maps
Description: Show policy maps
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD policy-map
Description: Data-plane type policy-map(s)
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
data-plane type policy-map(s) (Max Size 64) |
|
stats |
(Optional) Data-Plane Policer Statistics, where available |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD policy-map type data-plane WORD [stats]
Description: QOS type policy-map(s)
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
QOS type policy-map(s) (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD policy-map type qos WORD
Description: Show VRF Information
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD
Description: L2 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flowi stats |
|
vlan |
vlan info |
|
<vlan> |
<vlan>. Number range from=0 to=9223372036854775807 |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>
Description: L3 flow stats
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
permitDrop |
permitDrop |
|
flow |
flow stats |
|
srcpctag |
source pc tag |
|
<srcpctag> |
<srcpctag> |
|
dstpctag |
destination pc tag |
|
<dstpctag> |
<dstpctag> |
|
srcepgname |
source epg name |
|
<srcepgname> |
<srcepgname> |
|
dstepgname |
destination epg name |
|
<dstepgname> |
<dstepgname> |
|
srcip |
source ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
dstip |
destination ip |
|
A.B.C.D or A:B::C:D |
IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xx |
|
proto |
protocol |
|
<proto> |
<proto> |
|
srcport |
source port |
|
<srcport> |
<srcport> |
|
dstport |
destination port |
|
<dstport> |
<dstport> |
|
srcintf |
source interface |
|
<srcintf> |
<srcintf> |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD acllog <permitDrop> l3 flow srcpctag <srcpctag> dstpctag <dstpctag> srcepgname <srcepgname> dstepgname <dstepgname> srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>
Description: Show detailed view of VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD detail
Description: Show command for BGP peers
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 bgp
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<101-4000> |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 bgp node <101-4000>
Description: Show external l3 EIGRP
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 eigrp
Description: Show interanl details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 eigrp detail
Description: Show command for external-l3 epgs
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 epg <epgName>
Description: external-l3 epg in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<epgName> |
Name of the EPG to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 epg <epgName> detail
Description: Show tenant <tenant> vrf <vrf> external l3 interfaces
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 interfaces
Description: Show interfaces details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 interfaces detail
Description: Show command for IPv4 and IPv6 external l3 OSPF configuration
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 ospf
Description: Show internal details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 ospf detail
Description: Show command for external-l3 route-map
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<l3out name> |
(Optional) Name of the route-map to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>]
Description: Show external-l3 route-map in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
<l3out name> |
(Optional) Name of the route-map to filter on |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail
Description: scale command
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 scale
Description: Show scale details
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 scale detail
Description: Show command for external-l3 static routes
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route detail
Description: node to filter on
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route node
Description: static-route in detail with operational status
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
|
arg |
Leaf Range or Leaf Name List |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD external-l3 static-route node detail
Description: Show ipv6 multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD ipv6multicast
Description: Show multicast configuration per VRF
Syntax:
|
WORD |
Name of the tenant to filter on (Max Size 63) |
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show tenant WORD vrf WORD multicast
Description: Show ipsla object ID details
Command Mode: exec : Exec Mode
Command Path:
# show track-ipsla
Description: Show track object ID details
Command Mode: exec : Exec Mode
Command Path:
# show track-objects
Description: Show session
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name>
Description: Show atomic counters
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> atomiccounter
Description: Show audit
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> audit
Description: Show contracts
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> contracts
Description: Show deployment changes
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> deployments
Description: Show events
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> events
Description: Show faults
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> faults
Description: Show latency stats
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> latency
Description: Show monitor
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> monitor
Description: Show reports
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> reports
Description: Show statistics
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> statistics
Description: Show topology
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> topology
Description: Show traceroute
Syntax:
|
session_name |
Session name |
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot session <session_name> traceroute
Description: Show sessions
Command Mode: exec : Exec Mode
Command Path:
# show troubleshoot sessions
Description: show upgrade-timeline for controller
Command Mode: exec : Exec Mode
Command Path:
# show upgrade-timeline controller
Description: show upgrade-timeline summary
Command Mode: exec : Exec Mode
Command Path:
# show upgrade-timeline summary
Description: show upgrade-timeline for a switch
Syntax:
|
switchId <switchId> |
switch id. Number range from=101 to=4000 |
Command Mode: exec : Exec Mode
Command Path:
# show upgrade-timeline switch <NUMBER>
Description: Show APIC controller upgrade information.
Command Mode: exec : Exec Mode
Command Path:
# show upgradeissues controller
Description: Show user information
Syntax:
|
WORD |
User name |
Command Mode: exec : Exec Mode
Command Path:
# show username <WORD>
Description: Show user information
Syntax:
|
WORD |
User name |
Command Mode: exec : Exec Mode
Command Path:
# show username <WORD> detail
Description: Show version information
Command Mode: exec : Exec Mode
Command Path:
# show versions
Description: Show command for vlan-domain
Syntax:
|
arg |
(Optional) Vlan-domain name |
|
<vlan-range> |
(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19 |
|
arg |
(Optional) Leaf id. Number range from=101 to=4000 |
|
detail |
(Optional) vlan-domain in detail with concrete MOs |
Command Mode: exec : Exec Mode
Command Path:
# show vlan-domain [name <>] [vlan] [leaf <>] [detail]
Description: Show VMware domain information
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain
Description: VMware domain name
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name>
Description: Show VMware domain EPG details
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> epg
Description: Show VMware ESX information
Syntax:
|
<name> |
VMware domain name |
|
<esx-ip> |
ESX IP |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> esx <esx-ip>
Description: Show VMware port group information
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> port-group
Description: Show VMware domain trunk portgroup details
Syntax:
|
<name> |
VMware domain name |
|
<name> |
(Optional) trunk portgroup name |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> trunk-portgroup [name <name>]
Description: VMware vCenter ip or hostname
Syntax:
|
<name> |
VMware domain name |
|
<hostname|ip> |
vCenter hostname or IP |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> vcenter <hostname|ip>
Description: Show VMware VM information
Syntax:
|
<name> |
VMware domain name |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> vm
Description: Show detailed VMware VM information
Syntax:
|
<name> |
VMware domain name |
|
<vm-name> |
VM Name |
Command Mode: exec : Exec Mode
Command Path:
# show vmware domain name <name> vm name <vm-name>
Description: Show VMware VM information
Syntax:
|
WORD |
(Optional) Specify a VM name |
|
A.B.C.D |
(Optional) IP address in format i.i.i.i |
|
E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE |
(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4) |
Command Mode: exec : Exec Mode
Command Path:
# show vmware vm [name <WORD>] [ip <A.B.C.D>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
Description: Show vpc mapping
Syntax:
|
map |
Map by name |
|
<vpc-list> |
vpc names |
Command Mode: exec : Exec Mode
Command Path:
# show vpc map <vpc-list>
Description: Leaf
Syntax:
|
map |
Map by name |
|
<vpc-list> |
vpc names |
|
WORD |
Leaf Range or Leaf Name List |
|
<101-199> |
(Optional) Fex ID. Number range from=101 to=199 |
Command Mode: exec : Exec Mode
Command Path:
# show vpc map <vpc-list> leaf WORD [fex <NUMBER>]
Description: Show VRF Information
Syntax:
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show vrf WORD
Description: Show detailed view of VRF
Syntax:
|
WORD |
Name of the VRF to filter on (Max Size 64) |
Command Mode: exec : Exec Mode
Command Path:
# show vrf WORD detail
Description: Show command for vsan-domain
Syntax:
|
arg |
(Optional) Vsan-domain name |
|
detail |
(Optional) Vsan-domain detailed information |
Command Mode: exec : Exec Mode
Command Path:
# show vsan-domain [name <>] [detail]
Description: Check for SR Upgrade
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# sr-upgrade
Description: Set target SR version
Syntax:
|
<version> |
SR version |
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# sr-version <version>
Description: Create switch firmware upgrade policy
Syntax:
|
WORD |
switch-group name (Max Size 64) |
Command Mode: firmware : Firmware upgrade configuration Mode
Command Path:
# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
Description: Add switches to switch group
Syntax:
|
arg |
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# switch
Description: Syslog policy configuration mode
Syntax:
|
common |
Syslog Src Policy Name |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']]
(config)# syslog <common>
Feedback