Assign colours to link health thresholds | Topology Map for Network Visualisation | Cisco Crosswork Network Controller 7.2.x Administration Guide

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

	1.	From the main menu, choose Administration > Settings > System Settings.
	2.	Under Topology, select Metric thresholds.
	3.	Define the colour criteria for links. Each row defines a color and the percentage range that the color will represent. For each row, specify a colour and the percentage range it represents. Enter values in the To fields only, each row starts from the end of the previous row's range. Ensure that ranges are sequential, with no overlaps. For example, after a 0-25% range, the next row must begin above 25%. Assign a unique colour to each threshold. Do not reuse colours for multiple ranges. Colour-coded link thresholds apply to metrics such as bandwidth utilization, delay, jitter, packet errors, and packet drops. Delay and jitter metrics are only available when SR-PM is enabled.

Before you begin

Procedure