Cisco Intercloud Fabric Services Configuration Guide, Release 3.2.1

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Intercloud Fabric Services Configuration Guide, Release 3.2.1

Chapter Title

Configuring Provider Services Access

Results

Updated:
July 25, 2016

Chapter: Configuring Provider Services Access

Configuring Provider Services Access

This chapter contains the following sections:

About Intercloud Fabric Provider Services Access

Cisco Intercloud Fabric Provider Services Access allows cloud virtual machines provisioned in the Intercloud Fabric secure shell to have access to services from providers. Provider Services Access enables access to the following services and beyond:

  • ELB

  • RDS

  • S3 for AWS


Note
In the default mode, cloud VMs do not have access to provider networks.

Intercloud Fabric Provider Services Access provides the following functionality:

  • VMs provisioned on Intercloud Fabric's secure shell can access services from your provider.

  • An IT administrator can manage access through system-wide policies.

Provider Services Access can only be implemented for AWS VPC clouds.

Guidelines and Limitations

The following limitations apply to Intercloud Fabric Provider Services Access:

  • Intercloud Fabric Provider Services Access is supported only on AWS.

  • With AWS as the provider, only AWS VPC is supported. (AWS Classic is not supported.)

  • The VPC network address space (services subnets) should not overlap with the enterprise address space.

  • Monitoring, troubleshooting, and configuring provider services, such as RDS and ELB, are outside the scope of the current Intercloud Fabric solution.

The following guidelines apply to Intercloud Fabric Provider Services Access:

  • Provider Services Access can only be used with AWS VPC.

  • Supported services:

    • Redshift

    • RDS

    • ELB

    • Route 53

    • S3

  • Intercloud Fabric Provider Services Access is always created under the tenant organization named icfCloud in Intercloud Fabric.

Configuring Provider Services Access Workflow

Configuring Provider Services Access involves the following high-level tasks:

    Step 1   Enabling Intercloud Fabric system-wide policies:
    Step 2   Managing the Intercloud Fabric routing policy:
    • An IT administrator can change the system default VM routing policy by adding the cloud subnet addresses with the action forward external.
    • See Managing Routing Policies.
    Step 3   Managing Intercloud Fabric cloud security groups:
    • Optionally, an IT administrator can configure the system VM default to restrict access to the VMs to a specific range of networks.
    • See Managing Cloud Security Groups.
    Step 4   Enabling Intercloud Fabric Provider Services Access while creating a VM:

    Managing Virtual Machine Policies

    Use this procedure to manage a virtual machine (VM) policy.

      Step 1   Log in to Intercloud Fabric.
      Step 2   Choose Manage > Policies > VM.

      The list of VM policies is displayed.

      Step 3   Select the VM, click the gear icon, and choose Edit to edit a VM policy.

      Note    For Provider Services Access, select the system default VM policy (system_default_vm_policy).
      Step 4   You can edit the following for VM Policy:
      Name Description

      Provider Services Access

      Check the check box to enable Provider Services Access on the VM.

      Step 5   Click Save.

      Managing Routing Policies

      A routing policy defines the forwarding entries in the Intercloud Fabric solution. The routing policy is used by the routing service on the Intercloud Fabric cloud or VMs with Provider Services Access enabled. The routing policy is global to the system with one global policy for the routing service and another for the VMs with Provider Services Access. You can edit a routing policy to add additional prefixes.

      Use this procedure to manage a routing policy.

        Step 1   Log in to Intercloud Fabric.
        Step 2   Choose Manage > Policies > Routing.

        The list of routing policies is displayed.

        Step 3   Select the routing policy, click the gear icon, and choose Edit to edit a routing policy.
        Note    For Provider Services Access, select the system default routing policy (system_default_vm_routing_policy).
        Step 4   You can edit some of the following for Routing Policy:
        Name Description

        Name

        You cannot edit the name of the following default routing policies generated by Intercloud Fabric:

        • system_default_routing_policy

        • system_default_vm_routing_policy

        Description

        The description of the routing policy.

        Destination Prefix (Action)

        You can edit the destination prefix and the action.

        A routing policy can have from 1 to 100 prefixes. The destination prefix must be unique for a routing policy and is sorted based on the longest prefix match.

        Each entry in the routing policy is associated with one of the following actions:

        • Forward—Packets that match the prefix are forwarded to the private cloud.

        • Forward External—This action is specific to the VM routing policy. Packets that match the prefix are forwarded to the public cloud using the Provider Services Access.

          Note    For Provider Services Access, enter the Amazon VPC subnet CIDR (for example, 172.16.0.0) and choose Forward External.

        • Drop—This action is specific to the Routing Service routing policy.

        Step 5   Click Save.

        Managing Cloud Security Groups

        A cloud security group is a collection of CIDRs that can access VM instances that are created in the public cloud. These are global groups and can be referenced from the public Intercloud Fabric cloud.

        Use this procedure to manage a cloud security group.

          Step 1   Log in to Intercloud Fabric.
          Step 2   Choose Manage > Cloud Security Groups > Cloud Security Groups.

          The list of cloud security groups is displayed.

          Step 3   Click the + icon to create a cloud security group.
          Step 4   Complete the following fields for Cloud Security Group:
          Name Description

          Name

          Enter the name.

          The name can contain from 1 to 64 alphanumeric characters, including hyphens, underscores, periods, and colons.

          Type

          Choose the type.

          There are two types of cloud security groups:

          • infra-access cloud security group contains the CIDRs that can access infrastructure components such as the ICF Switch (ICS). This enables the ICF Extender (ICX) to communicate with the ICS on a set of predefined ports such as port 6644, 6646, 22, or 443.

          • Provider Services Access cloud security group is used for service networks and the ICS to access cloud VMs that have Provider Network Access enabled.

          Default infra-access and Provider Services Access cloud security groups are configured with any CIDR (127.0.0.1/32).

          Note    You can only create an infra-access cloud security group.   

          Description

          Enter the description.

          CIDR

          Enter the CIDR. Click the + icon to configure additional CIDRs.

          Step 5   To perform an action on the cloud security group, select the cloud security group, click the gear icon, and choose any of the following actions:
          Action Description

          Delete

          Deletes the cloud security group.

          You cannot delete the following cloud security groups:

          • The default infra-access cloud security group.

          • The default Provider Services Access cloud security group.

          Edit

          Updates the cloud security group.

          You can edit the name, type, and CIDR for the cloud security group.

          Step 6   Click Submit.
          Step 7   To view the status of the task, see the Cisco Intercloud Fabric Administration Guide, section "Managing Service Requests."

          Managing Virtual Machines

          Use this procedure to manage virtual machines.

          Before You Begin

          • You have uploaded the image to Intercloud Fabric.

          • You have created a catalog.

          • You have created a VDC.

            Step 1   Log in to Intercloud Fabric.
            Step 2   Choose Manage > Cloud Resources > Virtual Machines.

            The list of VMs is displayed. See the Cisco Intercloud Fabric Administration Guide, section "Icons Used in Intercloud Fabric."

            Step 3   Click the Dashboard icon to view the VM dashboard.

            See the Cisco Intercloud Fabric Administration Guide, section "Viewing the Intercloud Fabric Dashboard."

            Step 4   Click the + icon to create a new VM.
            Step 5   Complete the following fields for Create Virtual Machine:
            Name Description

            Name

            Enter the VM name. The VM name must be unique for all VDCs.

            Catalog

            Choose the catalog.

            VDC

            Choose the VDC for the catalog.

            CPU

            Enter a value to override the CPU specified in the catalog.

            Memory

            Enter a value to override the memory specified in the catalog.

            Disk

            Displays the disk information for the VM.

            Configure Network Interfaces

            Choose a network for the VM.

            See the Cisco Intercloud Fabric Administration Guide, section "About Networks in Intercloud Fabric" for more information.

            Provider Services Access

            Check the check box to enable Provider Services Access on the VM.

            Note    This option is only available when Provider Services Access is enabled in the default VM policy and the VM policy is associated with the VDC. In this release, Provider Services Access is only supported for VDCs associated with Amazon VPC.
            Step 6   Click Submit.
            Step 7   To view the status of the task, see the Cisco Intercloud Fabric Administration Guide, section "Managing Service Requests."
            Step 8   To perform an action on the VM, select it, click the gear icon, and choose any of the following actions:
            Action Description

            Start

            Starts a VM.

            Stop

            Stops a VM.

            Reboot

            Reboots a VM.

            Delete

            Deletes a VM from the Intercloud Fabric cloud.

            Was this Document Helpful?

            FeedbackFeedback

            Contact Cisco