Configuring the SCA BB Application for VAS Traffic Forwarding
After the SCE platform has been configured, open the SCA BB console to configure VAS traffic forwarding in the SCA BB application. While configuring the SCA BB application for VAS traffic forwarding, the purpose of the traffic forwarding is relevant. So, assign meaningful names to the VAS server groups and traffic forwarding tables.
This example illustrates how to configure the SCA BB application to forward traffic for content filtering. The VAS server group and the traffic forwarding table are both named ‘Content Filtering’. A package is created, named ‘VAS Package’, and the Content Filtering table is assigned to that package.
See Chapter 1, “Configuring the SCA BB Application to Support VAS Traffic Forwarding” for a full description of the steps provided in this section.
To configure VAS traffic forwarding in the SCA BB application, complete the following steps:
Step 1 Enable VAS in SCA BB.
Step 2 Rename the VAS server group to “Content Filtering”.
Figure 1-1 Renaming the Traffic Forwarding Group
Step 3 Create and configure the “Content Filtering” VAS forwarding table.
Figure 1-2 Configuring the VAS Forwarding Table
Step 4 Create the “VAS Package” package and assign the “Content Filtering” VAS forwarding table to it.
Figure 1-3 Assigning the VAS Forwarding Table to a Package