Cisco SCMS SCE Subscriber API Programmer Guide, Release 3.8.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 29, 2013
Chapter: About this Guide
About this Guide
Introduction
This guide is for networking or computer technicians who want to integrate a policy server with a Cisco Service Control Engine (SCE) platform to provision subscribers.
Document Revision History
The following Document Revision History table records the changes made to this document.
|
|
Release and Date |
|
|---|---|---|
OL-26793-02 |
Release 3.8.5 |
Updated for Release 3.8.5 • • • • • • • • • |
OL-26793-01 |
Release 3.8.x |
First version of this document (new for the Release 3.8.x train). |
Organization
The guide contains the following sections.
|
|
|
|
|---|---|---|
Chapter 1 |
Identifies the platforms on which you can run the SCE Subscriber API1 . This chapter also describes how to install, compile, and start running the API. |
|
Chapter 2 |
Describes the various terms and concepts that pertain to working with the SCE Subscriber API. |
|
Chapter 3 |
Describes the various events accessed by the SCE Subscriber API. |
|
Chapter 4 |
Describes the various API data types. |
|
Chapter 5 |
Provides a detailed description of the API programming structure, classes, methods, and interfaces. |
|
Chapter 6 |
Describes API logging for troubleshooting integration with the API. API logging enables you to monitor called operations, including the parameters received, on the API client side and on the SCE side. |
|
Appendix A |
Lists the error codes that the API returns. |
1 API = application programming interface |
Related Documentation
Use this API guide with the following Cisco documentation:
•
Cisco Service Control Management Suite Subscriber Manager User Guide
•Cisco Service Control Application for Broadband User Guide
•Cisco SCE 1000 2xGBE Installation and Configuration Guide
•Cisco SCE 2000 Installation and Configuration Guide
Conventions
The document uses the following conventions.
Note Means reader take note.
Tip Means the following information will help you solve a problem.
Means
reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data.
Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.
 |
Warning Means reader be warned. In this situation, you might perform an action that could result in bodily injury.
|
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Feedback