Supported Packages and System Requirements

Memory Requirements


Note
Memory is not configurable for the Cisco Remote PHY device.
Table 1. Memory Recommendations for the Cisco Remote PHY Device, Cisco 1x2 / Compact Shelf RPD Software 9.5

Feature Set

Cisco RPHY Processor

Software Image

Fixed Memory

Runs From

CISCO RPHY 9.5

NXP LS1043A

RPD-V9-5.itb.SSA

1G Bytes

Bootflash:
Table 2. Memory Recommendations for the Cisco Remote PHY Device, Cisco 1x2 / Compact Shelf RPD Software 9.4

Feature Set

Cisco RPHY Processor

Software Image

Fixed Memory

Runs From

CISCO RPHY 9.4

NXP LS1043A

RPD-V9-4.itb.SSA

1G Bytes

Bootflash:
Table 3. Memory Recommendations for the Cisco Remote PHY Device, Cisco 1x2 / Compact Shelf RPD Software 9.3

Feature Set

Cisco RPHY Processor

Software Image

Fixed Memory

Runs From

CISCO RPHY 9.3

NXP LS1043A

RPD-V9-3.itb.SSA

1G Bytes

Bootflash:
Table 4. Memory Recommendations for the Cisco Remote PHY Device, Cisco 1x2 / Compact Shelf RPD Software 9.2

Feature Set

Cisco RPHY Processor

Software Image

Fixed Memory

Runs From

CISCO RPHY 9.2

NXP LS1043A

RPD-V9-2.itb.SSA

1G Bytes

Bootflash:
Table 5. Memory Recommendations for the Cisco Remote PHY Device, Cisco 1x2 / Compact Shelf RPD Software 9.1

Feature Set

Cisco RPHY Processor

Software Image

Fixed Memory

Runs From

CISCO RPHY 9.1

NXP LS1043A

RPD-V9-1.itb.SSA

1G Bytes

Bootflash:

Determining the Software Version

Cisco 1x2 / Compact Shelf RPD Software 9.5

To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote PHY Device, log in and enter the show version EXEC command: 

R-PHY#show version 
Cisco RPD Software, version v9.5, build by rpd-release, on 2021-04-25 04:11:21
Branch information:
        RPD branch: (HEAD detached at RPD_V9_5_20210425)
        OpenRPD branch: (HEAD detached at RPD_V9_5_20210425)
        SeresRPD branch: (HEAD detached at RPD_V9_5_20210425)

Note
The system image file name of the factory installed image is /bootflash/RPD-V9.5_hardware_certificate.itb.rel.sign.SSA. The system image file name of the Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V9-5.itb.SSA.act.

Cisco 1x2 / Compact Shelf RPD Software 9.4

To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote PHY Device, log in and enter the show version EXEC command: 

R-PHY#show version
Cisco RPD Software, version v9.4, build by rpd-release, on 2021-01-18 20:05:30
Branch information:
        RPD branch: (HEAD detached at RPD_V9_4_20210118)
        OpenRPD branch: (HEAD detached at RPD_V9_4_20210118)
        SeresRPD branch: (HEAD detached at RPD_V9_4_20210118)

Note
The system image file name of the factory installed image is /bootflash/RPD-V9.4_hardware_certificate.itb.rel.sign.SSA. The system image file name of the Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V9-4.itb.SSA.act.

Cisco 1x2 / Compact Shelf RPD Software 9.3

To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote PHY Device, log in and enter the show version EXEC command: 

R-PHY#show version
Cisco RPD Software, version v9.3, build by rpd-release, on 2020-11-25 07:45:09
Branch information:
        RPD branch: (HEAD detached at RPD_V9_3_20201125)
        OpenRPD branch: (HEAD detached at RPD_V9_3_20201125)
        SeresRPD branch: (HEAD detached at RPD_V9_3_20201125)

Note
The system image file name of the factory installed image is /bootflash/RPD-V9.3_hardware_certificate.itb.rel.sign.SSA. The system image file name of the Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V9-3.itb.SSA.act.

Cisco 1x2 / Compact Shelf RPD Software 9.2

To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote PHY Device, log in and enter the show version EXEC command: 

R-PHY#show version
Cisco RPD Software, version v9.2, build by rpd-release, on 2020-10-27 18:04:20
Branch information:
        RPD branch: (HEAD detached at RPD_V9_2_20201028)
        OpenRPD branch: (HEAD detached at RPD_V9_2_20201028)
        SeresRPD branch: (HEAD detached at RPD_V9_2_20201028)

Note
The system image file name of the factory installed image is /bootflash/RPD-V9.2_hardware_certificate.itb.rel.sign.SSA. The system image file name of the Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V9-2.itb.SSA.act.

Cisco 1x2 / Compact Shelf RPD Software 9.1

To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote PHY Device, log in and enter the show version EXEC command: 

R-PHY#show version
Cisco RPD Software, version v9.1, build by rpd-release, on 2020-09-29 01:38:22
Branch information:
        RPD branch: (HEAD detached at RPD_V9_1_20200929)
        OpenRPD branch: (HEAD detached at RPD_V9_1_20200929)
        SeresRPD branch: (HEAD detached at RPD_V9_1_20200929)

Note
The system image file name of the factory installed image is /bootflash/RPD-V9.1_hardware_certificate.itb.rel.sign.SSA. The system image file name of the Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V9-1.itb.SSA.act.