System Requirements
These sections describe the system requirements for Cisco 1x2 / Compact Shelf RPD Software 6.5 and its maintenance releases:
Memory Requirements for Cisco 1x2 / Compact Shelf RPD Software 6.5
Note |
Memory is not configurable for the Cisco Remote PHY device. |
Feature Set |
Cisco RPHY Processor |
Software Image |
Fixed Memory |
Runs From |
---|---|---|---|---|
CISCO RPHY 6.5 |
NXP LS1043A |
RPD-V6-5.itb.SSA |
1G Bytes |
Bootflash: |
Hardware Supported
For detailed information about the hardware supported in Cisco 1x2 / Compact Shelf RPD Software 6.5 and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Determining the Software Version of Cisco 1x2 / Compact Shelf RPD Software 6.5
R-PHY#show version
Cisco RPD Software, version v6.5, build by rpd-release, on 2019-04-29 03:28:18
Branch information:
RPD branch: (detached from RPD_V6_5_20190429)
OpenRPD branch: (detached from RPD_V6_5_20190429)
SeresRPD branch: (detached from RPD_V6_5_20190429)
Note |
The system image file name of the factory installed image is /bootflash/RPD-V6.5_hardware_certificate.itb.rel.sign.SSA. The system image file name of the Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V6-5.itb.SSA.act. |