- Preface
- Chapter 1: Cisco uBR7225VXR Overview
- Chapter 2: Preparing the Cisco uBR7225VXR Router for Installation
- Chapter 3: Installing the Cisco uBR7225VXR Router
- Chapter 4: Connecting the Cisco uBR7225VXR Router to the Cable Headend
- Chapter 5: Maintaining the Cisco uBR7225VXR Router
- Chapter 6: Troubleshooting
- Appendix A: Cisco uBR7225VXR Router Specifications
- Appendix B: RF Specifications
- Appendix C: Cable Specifications
- Appendix D: Industry-Standard Wiring Plans
- Appendix E: Frequency Allocation Tables
- Appendix F: Manufacturers for Headend Provisioning Requirements
- Appendix G: Site Log
- Glossary
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Chapter: Appendix G: Site Log
Site Log
A site log provides a historical record of all actions relevant to the Cisco uBR7225VXR universal broadband router operation and maintenance. Keep your site log in a common place near the chassis where anyone who performs tasks has access to it. Site log entries might include the following:
•
Installation progress—Make a copy of the "Cisco uBR7225VXR Router Installation Checklist" section, and insert it into the site log. Make entries on the Installation Checklist as each procedure is completed.
•Upgrades and removal and replacement procedures—Use the site log as a record of system maintenance and expansion history. Each time a procedure is performed on the system, update the site log to reflect the following:
–Cable interface line cards installed, removed, or replaced
–Network processing engine removed, replaced, or upgraded
–Power supply removed or replaced
–Redundant power supply installed
–Chassis replaced
–Subchassis and midplane replaced
–Configuration changed; cable interface line cards moved
–Memory upgraded
–Software upgraded
–Corrective maintenance procedures performed
–Intermittent problems
–Related comments
Table G-1 shows a sample site log page. Make copies of the sample or design your own site log to meet the needs of your site and equipment.
|
|
|
|
|---|---|---|
Feedback