To verify configuration of VDOC broadcast and inter line card RF
spanning, use the following commands:
- show
controller
integrated-cable
- show
controller
modular-cable
- show
cable
multicast
db
- show
cable
mac-domain
rcc
- show
cable
modem
service-flow
- show
cable
active-reman
To verify that the bonding group being shared by service groups is
associated with all relevant MAC domains of the Cisco UBR-MC20X20V line card,
use the
show
controller
integrated-cable
command with the association keyword as shown in the following
example:
Router# show controller integrated-cable 8/0/1 association
WB Association Info for 8/0 No of WB 30
WB BG Bundle NB NB chan Reserved Total
channel ID num channel ID CIR CIR
Wideband-Cable8/0/0:0 1217 11 Cable7/0/0 0 0 6000000
Multicast 0 6000000
Wideband-Cable8/0/0:1 1218 11 Cable7/0/0 0 0 1500000
Multicast 0 1500000
Wideband-Cable8/0/0:2 1219 11 Cable7/0/0 0 0 1500000
Multicast 0 1500000
Wideband-Cable8/0/1:0 1249 11 Cable7/0/0 0 0 6000000
Multicast 0 6000000
To verify that the bonding group being shared by service groups is
associated with all relevant MAC domains of the Cisco uBR-MC3GX60V line card,
use the
show
controller
modular-cable command with the association keyword
as shown in the following example:
Router# show controller modular-cable 5/0/0 association
WB Association Info for 5/0 No of WB 96
WB BG Bundle NB NB chan Reserved Total
channel ID num channel ID CIR CIR
Wideband-Cable5/0/0:0 257 11 Cable5/0/0 0 0 6000000
Multicast 0 6000000
Wideband-Cable5/0/0:1 258 11 Cable5/0/0 0 0 4500000
Multicast 0 4500000
Wideband-Cable5/0/0:2 259 11 Cable5/0/1 0 0 6000000
Multicast 0 6000000
Wideband-Cable5/0/0:3 260 11 Cable5/0/1 0 0 4500000
Multicast 0 4500000
To verify the multicast bundle interface, use the
show
cable
multicast
db command with the bundle keyword as shown in the
following example:
Router# show cable multicast db bundle 11
Interface : Bundle11.1
Session (S,G) : (*,230.40.40.40)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo5/0/0:4 Bundle11.1 Ca5/0/1 ff05.0000.0024 1
Interface : Bundle11.1
Session (S,G) : (*,230.40.40.40)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo5/0/0:0 Bundle11.1 Ca5/0/0 ff05.0000.0020 1
Interface : Bundle11.1
Session (S,G) : (*,230.40.40.40)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo1/2/0:1 Bundle11.1 Ca7/0/0 ff01.0002.0021 1
Interface : Bundle11.1
Session (S,G) : (*,230.40.40.40)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo1/2/0:0 Bundle11.1 Ca7/0/0 ff01.0002.0020 1
Interface : Bundle11.1
Session (S,G) : (*,230.50.50.50)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo5/0/0:4 Bundle11.1 Ca5/0/1 ff05.0000.0024 1
Interface : Bundle11.1
Session (S,G) : (*,230.50.50.50)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo5/0/0:0 Bundle11.1 Ca5/0/0 ff05.0000.0020 1
Interface : Bundle11.1
Session (S,G) : (*,230.50.50.50)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo1/2/0:1 Bundle11.1 Ca7/0/0 ff01.0002.0021 1
Interface : Bundle11.1
Session (S,G) : (*,230.50.50.50)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo1/2/0:0 Bundle11.1 Ca7/0/0 ff01.0002.0020 1
Interface : Bundle11.1
Session (S,G) : (*,230.7.7.7)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Wi6/0/0:1 Bundle11.1 Ca6/0/0 ff06.0000.0001 1
Interface : Bundle11.1
Session (S,G) : (*,230.5.5.5)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Wi6/0/0:0 Bundle11.1 Ca6/0/0 ff06.0000.0000 1
Interface : Bundle11.1
Session (S,G) : (*,230.2.2.2)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Wi6/0/0:1 Bundle11.1 Ca6/0/0 ff06.0000.0001 1
Interface : Bundle11.1
Session (S,G) : (*,230.1.1.1)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Wi6/0/0:0 Bundle11.1 Ca6/0/0 ff06.0000.0000 1
Interface : Bundle11.1
Session (S,G) : (*,230.30.30.30)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo5/0/0:4 Bundle11.1 Ca5/0/1 ff05.0000.0024 1
Interface : Bundle11.1
Session (S,G) : (*,230.30.30.30)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo5/0/0:0 Bundle11.1 Ca5/0/0 ff05.0000.0020 1
Interface : Bundle11.1
Session (S,G) : (*,230.30.30.30)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo1/2/0:1 Bundle11.1 Ca7/0/0 ff01.0002.0021 1
Interface : Bundle11.1
Session (S,G) : (*,230.30.30.30)
Fwd Intfc Sub Intfc Host Intfc CM Mac Hosts
Mo1/2/0:0 Bundle11.1 Ca7/0/0 ff01.0002.0020 1
To verify that the right RCC templates are available for the remote
MAC domain, use the
show cable mac-domain rcc
command as shown in the following example:
Router# show cable mac-domain cable 5/0/0 rcc
RCC-ID RCP RCs MD-DS-SG CMs WB/RCC-TMPL
1 00 10 00 00 04 4 1 0 RCC-TMPL (1)
2 00 10 00 00 04 4 1 8 RCC-TMPL (2)
3 00 10 00 00 04 8 1 2 RCC-TMPL (5)
4 00 10 00 00 04 8 1 2 RCC-TMPL (6)
5 00 00 00 00 00 4 0 0 WB (Wi5/0/0:0)
6 00 00 00 00 00 3 0 0 WB (Wi5/0/0:1)
7 00 00 00 00 00 2 0 0 WB (Wi5/0/0:4)
8 00 00 00 00 00 1 0 0 WB (Wi5/0/0:5)
9 00 00 00 00 00 1 0 0 WB (Wi5/0/0:6)
10 00 00 00 00 00 1 0 0 WB (Wi5/0/0:7)
11 00 00 00 00 00 1 0 0 WB (Wi5/0/0:8)
12 00 00 00 00 00 2 0 0 WB (Wi5/0/0:9)
13 00 00 00 00 00 4 0 0 WB (Wi6/0/0:1)
14 00 00 00 00 00 1 0 0 WB (Wi6/0/0:2)
15 00 00 00 00 00 1 0 0 WB (Wi6/0/0:3)
16 00 00 00 00 00 3 0 0 WB (Wi6/0/0:6)
17 00 00 00 00 00 3 0 0 WB (Wi6/0/0:7)
18 00 00 00 00 00 2 0 0 WB (Wi6/0/0:8)
To verify that the service flows are established correctly on local
and remote bonding groups, use the
show cable modem service-flow
command as shown in the following example:
Router# show cable modem 0022.ce89.9664 service-flow
SUMMARY:
MAC Address IP Address Host MAC Prim Num Primary
DS
Interface State Sid CPE Downstream
RfId
0022.ce89.9664 30.13.2.74 C5/0/0/UB w-online(pt) 1 0 Mo5/0/0:0
240
Sfid Dir Curr Sid Sched Prio MaxSusRate MaxBrst MinRsvRate Throughput
State Type
15 US act 1 BE 0 0 3044 0 0
16 DS act N/A BE 0 1000012 6000000 0 0
33 DS act N/A BE 0 1000012 6000000 0 0
UPSTREAM SERVICE FLOW DETAIL:
SFID SID Requests Polls Grants Delayed Dropped Packets
Grants Grants
15 1 0 0 401 0 0 416
DOWNSTREAM SERVICE FLOW DETAIL:
SFID RP_SFID QID Flg Policer Scheduler FrwdIF
Xmits Drops Xmits Drops
16 33559 132579 51 0 51 0 Wi5/0/0:1
33 33560 132580 0 0 0 0 Wi6/0/0:2
Flags Legend:
$: Low Latency Queue (aggregated)
~: CIR Queue
To verify the line card high availability information for all
interfaces, use the show cable active-reman command
as shown in the following example:
Router# show cable active-reman all
-------------------------------------------------------------
Active Reman info on LC 5/0:
[slot_index 0]: work_slot:1/0, active_slot:1/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 1]: work_slot:3/0, active_slot:3/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 2]: work_slot:5/0, active_slot:5/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 3]: work_slot:5/1, active_slot:5/1, is_protect:TRUE , is_standby
:TRUE
[slot_index 4]: work_slot:6/0, active_slot:6/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 5]: work_slot:6/1, active_slot:6/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 6]: work_slot:7/0, active_slot:7/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 7]: work_slot:7/1, active_slot:7/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 8]: work_slot:8/0, active_slot:8/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 9]: work_slot:8/1, active_slot:8/1, is_protect:FALSE, is_standby
:FALSE
-------------------------------------------------------------
Active Reman info on LC 5/1:
[slot_index 0]: work_slot:1/0, active_slot:1/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 1]: work_slot:3/0, active_slot:3/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 2]: work_slot:5/0, active_slot:5/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 3]: work_slot:5/1, active_slot:5/1, is_protect:TRUE , is_standby
:TRUE
[slot_index 4]: work_slot:6/0, active_slot:6/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 5]: work_slot:6/1, active_slot:6/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 6]: work_slot:7/0, active_slot:7/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 7]: work_slot:7/1, active_slot:7/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 8]: work_slot:8/0, active_slot:8/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 9]: work_slot:8/1, active_slot:8/1, is_protect:FALSE, is_standby
:FALSE
-------------------------------------------------------------
Active Reman info on LC 6/0:
[slot_index 0]: work_slot:1/0, active_slot:1/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 1]: work_slot:3/0, active_slot:3/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 2]: work_slot:5/0, active_slot:5/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 3]: work_slot:5/1, active_slot:5/1, is_protect:TRUE , is_standby
:TRUE
[slot_index 4]: work_slot:6/0, active_slot:6/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 5]: work_slot:6/1, active_slot:6/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 6]: work_slot:7/0, active_slot:7/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 7]: work_slot:7/1, active_slot:7/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 8]: work_slot:8/0, active_slot:8/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 9]: work_slot:8/1, active_slot:8/1, is_protect:FALSE, is_standby
:FALSE
-------------------------------------------------------------
Active Reman info on LC 7/0:
[slot_index 0]: work_slot:1/0, active_slot:1/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 1]: work_slot:3/0, active_slot:3/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 2]: work_slot:5/0, active_slot:5/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 3]: work_slot:5/1, active_slot:5/1, is_protect:TRUE , is_standby
:TRUE
[slot_index 4]: work_slot:6/0, active_slot:6/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 5]: work_slot:6/1, active_slot:6/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 6]: work_slot:7/0, active_slot:7/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 7]: work_slot:7/1, active_slot:7/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 8]: work_slot:8/0, active_slot:8/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 9]: work_slot:8/1, active_slot:8/1, is_protect:FALSE, is_standby
:FALSE
-------------------------------------------------------------
Active Reman info on LC 8/0:
[slot_index 0]: work_slot:1/0, active_slot:1/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 1]: work_slot:3/0, active_slot:3/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 2]: work_slot:5/0, active_slot:5/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 3]: work_slot:5/1, active_slot:5/1, is_protect:TRUE , is_standby
:TRUE
[slot_index 4]: work_slot:6/0, active_slot:6/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 5]: work_slot:6/1, active_slot:6/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 6]: work_slot:7/0, active_slot:7/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 7]: work_slot:7/1, active_slot:7/1, is_protect:FALSE, is_standby
:FALSE
[slot_index 8]: work_slot:8/0, active_slot:8/0, is_protect:FALSE, is_standby
:FALSE
[slot_index 9]: work_slot:8/1, active_slot:8/1, is_protect:FALSE, is_standby