System Requirements
These sections describe the system requirements for Cisco IOS XE Amsterdam 17.2.x:
Hardware Supported
For detailed information about the hardware supported in Cisco IOS XE Amsterdam 17.2.x and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Note |
The Cisco cBR chassis must house line cards with either downstream DOCSIS 3.0 PHY modules or downstream DOCSIS 3.1 PHY modules. Mixed configuration is not supported. |
Memory Requirements
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Amsterdam 17.2.x feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.17.2.01.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.17.2.01.SPA.bin |
8G |
16G |
Supervisor |
CISCO IOS-XE Kobol-R |
Cisco cBR8 (Kobol-R) Processor |
cbrsup-universalk9.17.2.01.SPA.bin |
8G |
64G |
Supervisor |