The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Release 16.9.1a feature sets.

For detailed information about the hardware supported in Cisco IOS XE Release 16.9.x and its maintenance releases, see:

http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.

Note	The Cisco cBR chassis must house line cards with either Downstream DOCSIS 3.0 PHY modules or Downstream DOCSIS 3.1 PHY modules. Mixed configuration is not supported.

To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:

Router>sh ver
Load for five secs: 13%/1%; one minute: 16%; five minutes: 16%
Time source is NTP, 08:21:52.008 PDT Tue Jul 31 2018
Cisco IOS XE Software, Version 16.09.01a
Cisco IOS Software [Fuji], cBR  Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.1a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 26-Jul-18 19:29 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

Taipei_cBR_12 uptime is 2 days, 14 hours, 30 minutes
Uptime for this control processor is 2 days, 12 hours, 21 minutes
System returned to ROM by SSO Switchover at 19:57:15 PDT Sat Jul 28 2018
System restarted at 20:04:32 PDT Sat Jul 28 2018
System image file is "harddisk:cbrsup-universalk9.16.09.01a.SPA.bin"
Last reload reason: redundancy force-switchover



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco cBR-8 (CBR) processor (revision CBRVE) with 12341153K/6147K bytes of memory.
Processor board ID FXS1920Q0B8
32 Gigabit Ethernet interfaces
16 Ten Gigabit Ethernet interfaces
4 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7649279K bytes of eUSB flash at bootflash:.
117155287K bytes of SATA hard disk at harddisk:.
30744560K bytes of USB flash at usb1:.
0K bytes of WebUI ODM Files at webui:.

Configuration register is 0x2

This section describes microcode software that is supported for the Cisco cBR Series Converged Broadband Routers.

For more information, see Upgrading the Cisco cBR Series Converged Broadband Routers for Cisco IOS XE Fuji 16.9.x.

Cisco IOS XE software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS XE software images are included in a release. Each feature set contains a specific set of Cisco IOS XE features.

Caution

Cisco IOS XE images with strong encryption (including, but not limited to 168-bit [3DES] data encryption feature sets) are subject to U.S. government export controls and have limited distribution. Strong encryption images to be installed outside the United States are likely to require an export license. Customer orders may be denied or subject to delay because of U.S. government regulations. When applicable, the purchaser or user must obtain local import and use authorizations for all encryption strengths. Please contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com.

There are no new hardware feature for Cisco IOS XE Fuji 16.9.1a release.

There are no new MIBs in Cisco IOS-XE Fuji 16.9.1a. For the list of RPHY MIBs, see https://www.cisco.com/c/en/us/td/docs/cable/remote-phy-devices/release/notes/b_cisco_rpd_software_51_release_notes.html.