The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes open severity 1 and 2 caveats and select severity 3 caveats:
The Open Caveats sections list open caveats that apply to the current release and may apply to previous releases. A caveat that is open for a prior release and is still unresolved applies to all future releases until it is resolved.
The bug IDs are sorted alphanumerically.
 Note |
The Caveats section includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a specific caveat you must use the Bug Search Tool. |
Cisco Bug Search Tool (BST), the online successor to Bug Toolkit, is designed to improve effectiveness in network risk management and device troubleshooting. You can search for bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. For more details on the tool, see the help page located at http://www.cisco.com/web/applicat/cbsshelp/help.html.
|
Caveat ID Number |
Description |
|---|---|
|
Bulk Delete of RPDs from EPNM Fails. |
|
|
Cassandra records get erased. |
|
|
Devices not shown on the Topology page. |
|
|
Kubernetes Dashboard Not Available. |
|
|
Clearing (or Adding) RPD Pairing while Standby LC is Active can cause inconsistencies. |
|
|
Under Global Config, Router Vendor field should be changed to Router Product Type. |
|
|
SmartPhy Liveliness: not able to update credential profile when add or update Core. |
|
|
Robot logfs disk space 100% used due to Prometheus. |
|
|
Device Locked in-sync NSO - check sync result fails during ds-split-us-combine test. |
|
|
set-rpd-pairing fails with DNS name if two entries exists in the Inventory page. |
|
|
If unresponsive CBR8s are added to the inventory, NSO sync to good CBR8s is blocked. |
|
|
SNMP liveliness keeps polling deleted devices. |
|
|
Memory usage increased on quiet VM with one RPD retrying. |
|
|
Unable to Connect to CBR - All VTY Lines used. |
|
|
Cable: Auto-logout even when using the application. |
|
|
Webui does not completely logout after timeout. |
|
Caveat ID Number |
Description |
|---|---|
|
Devices not shown on the Topology page. |
|
|
Smart PHY FCS-1.0.9 - Kubernetes Dashboard Not Available. |
|
|
Clearing (or Adding) RPD Pairing while Standby LC is Active can cause inconsistencies. |
|
|
Under Global Config, Router Vendor field should be changed to Router Product Type |
|
|
When update or delete rpd-pairing in UI, rpd-service-manager throws exception. |
|
|
When Cassandra dies, rpd-service-manager never recovers. |
|
|
Cable rpd and cable fiber node ds/us controller is inconsistent when ds splitting and no us combining. |
|
|
CSV: duplicate MAC/Name in CSV file results in unpredictable behavior. |
|
|
Delete RPD does not propagate to cBR from NSO. |
|
|
Cable: Auto-logout even when using the application. |
|
|
SmartPhy Liveliness: not able to update credential profile when add or update Core. |
|
|
Robot logfs disk space 100% used due to Prometheus. |
|
|
addCore has exceptions if DLM has core on RPD service manager bootup. |
|
|
On CBR8 reboot, RPD automation tries to assign different resources to a previously online RPD. |
|
|
set-rpd-pairing fails with DNS name if two entries exists in the Inventory page. |
|
|
If unresponsive CBR8s are added to the inventory, NSO sync to good CBR8s is blocked. |
|
|
SNMP liveliness keeps polling deleted devices. |
|
|
Memory usage increased on quiet VM with one RPD retrying. |
|
|
Unable to Connect to CBR - All VTY Lines Used. |
|
|
Device Locked in-sync NSO - check sync result fails during ds-split-us-combine test. |
|
|
Webui doesn't completely logout after timeout. |
|
|
Android: Cannot update RPD MAC using mobile. |
Feedback