- Preface
- Using the WAAS Command-Line Interface
- Cisco WAAS Software Command Summary
- CLI Commands
- EXEC Mode Commands
- Global Configuration Mode Commands
- Interface Configuration Mode Commands
- Standard ACL Configuration Mode Commands
- Extended ACL Configuration Mode Commands
- Preposition Configuration Mode Commands
- PKI Certificate Authority Configuration Mode Commands
- PKI Global Settings Configuration Mode Commands
- SSL Accelerated Service Configuration Mode Commands
- SSL Cipher List Configuration Mode Commands
- SSL Global Service Configuration Mode Commands
- SSL Host Peering Service Configuration Mode Commands
- SSL Management Service Configuration Mode Commands
- WCCP Configuration Mode Commands
- AppNav Controller Group Configuration Mode Commands
- Service Node Group Configuration Mode Commands
- Service Node Configuration Mode Commands
- Service Context Configuration Mode Commands
- Class Map Configuration Mode Commands
- Policy Map Configuration Mode Commands
- Policy Map Class Configuration Mode Commands
- Acronyms and Abbreviations
- Command Summary by Mode
Cisco Wide Area Applications Services Command Reference Guide 6.4.3x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 2, 2012
Chapter: Service Node Group Configuration Mode Commands
Service Node Group Configuration Mode Commands
To configure a WAAS Node (WNG) that is part of an AppNav Cluster, use the service-insertion service-node-group global configuration command. To unconfigure settings, use the no form of this command.
service-insertion service-node-group sngroupname { description description | service-node ip-address [ description description ]}
no service-insertion service-node-group sngroupname { description description | service-node ip-address [ description description ]}
Syntax Description
Defaults
Command Modes
Device Modes
Usage Guidelines
Use the service-insertion service-node-group command to configure a WNG that is part of an AppNav Cluster. This command initiates the service node group configuration mode, which is indicated by a different prompt (config-sng). To return to global configuration mode, enter the exit command.
Each ANC in the AppNav Cluster must be configured with the settings for each WNG in the cluster by using the service-insertion service-node-group command.
A WNG can contain a maximum of 32 WNs, with a maximum of 32 WNs across all WNGs in the AppNav Cluster.
Examples
The following example shows how to configure and enable two WNGs, each having two WNs, on a ANC:
Related Commands
(config-sng) description
To configure the WNG description, use the description service node group configuration command. To unconfigure the description, use the no form of this command.
Syntax Description
Specifies a description of the WNG with up to 200 alphanumeric and space characters. |
Defaults
Command Modes
Service node group configuration
Device Modes
Examples
The following example shows how to configure a WNG description:
Related Commands
(config-sng) service-node
To configure the IP address and description of a WN to be added to the WNG, use the service-node service node group configuration command. To unconfigure the IP address or description, use the no form of this command.
service-node ip-address [ description description ]
no service-node ip-address [ description description ]
Syntax Description
Defaults
Command Modes
Service node group configuration
Device Modes
Examples
The following example shows how to configure the IP addresses of two WNs in a group:
Feedback