- Preface
- Using the WAAS Command-Line Interface
- Cisco WAAS Software Command Summary
- CLI Commands
- EXEC Mode Commands
- Global Configuration Mode Commands
- Interface Configuration Mode Commands
- Standard ACL Configuration Mode Commands
- Extended ACL Configuration Mode Commands
- Preposition Configuration Mode Commands
- Virtual Blade Configuration Mode Commands
- PKI Certificate Authority Configuration Mode Commands
- PKI Global Settings Configuration Mode Commands
- SSL Accelerated Service Configuration Mode Commands
- SSL Cipher List Configuration Mode Commands
- SSL Global Service Configuration Mode Commands
- SSL Host Peering Service Configuration Mode Commands
- SSL Management Service Configuration Mode Commands
- WCCP Configuration Mode Commands
- AppNav Controller Group Configuration Mode Commands
- Service Node Group Configuration Mode Commands
- Service Node Configuration Mode Commands
- Service Context Configuration Mode Commands
- Class Map Configuration Mode Commands
- Policy Map Configuration Mode Commands
- Policy Map Class Configuration Mode Commands
- Acronyms and Abbreviations
- Command Summary by Mode
Cisco Wide Area Applications Services Command Reference Guide 5.5.1
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 16, 2010
Chapter: SSL Global Service Configuration Mode Commands
SSL Global Service Configuration Mode Commands
SSL global service lets you enable and configure basic SSL acceleration settings on your WAAS system. To configure global services on a WAAS device, use the crypto ssl services global-settings global configuration command. To delete a parameter use the no form of the command.
crypto ssl services global-settings
no crypto ssl services global-settings
Syntax Description
Defaults
Command Modes
Device Modes
Usage Guidelines
Use the crypto ssl services global-settings command to configure basic SSL acceleration settings. The crypto ssl services global-settings command initiates SSL global service configuration mode, as indicated by the following prompt:
Within SSL global service configuration mode, you can use SSL global service configuration commands. To return to global configuration mode, enter exit at the SSL global service configuration mode prompt.
Examples
The following example shows how to enter SSL global service configuration mode:
Related Commands
(config-ssl-global) cipher-list
(config-ssl-global) cipher-list
To configure secure socket layer (SSL) encryption cipher lists on a WAAS device, use the cipher-list command. To delete a cipher list use the no form of the command.
no cipher-list cipher-list-name
Syntax Description
Name of the cipher list you want to create or edit. The cipher list name may contain up to 64 characters. |
Defaults
Command Modes
SSL global service configuration
Device Modes
Usage Guidelines
A cipher list is customer list of cipher suites that you assign to an SSL connection. (See the SSL Cipher List Configuration Mode Commands chapter for more information.)
Examples
The following example shows how to enter SSL global service configuration mode, and then create or edit a cipher list called myciphers. If the cipher list is already established on the WAAS device, the cipher-list command edits it. If the cipher list does not exist, the cipher-list command creates it:
Related Commands
(config-ssl-global) machine-cert-key
To configure a certificate and private key, use the machine-cert-key command.
Syntax Description
Filename of the certificate and key. Must be in PKCS#12 and have a “.p12” extension. |
Defaults
Command Modes
SSL global service configuration
Device Modes
Examples
The following example shows how to enter SSL global service configuration mode, and then import a certificate and key:
Related Commands
(config-ssl-global) version
To specify the type of SSL protocol to use for global services, use the version command.
Syntax Description
Specifies SSL3 for the SSL version 3 protocol, TLS1 for the Transport Layer Security version 1 protocol, or All to use both SSL3 and TLS1 SSL protocols. |
Defaults
Command Modes
SSL global service configuration
Device Modes
Examples
The following example shows how to enter SSL global service configuration mode, and then set the protocol to SSL version 3:
Feedback