How to Set Up Playlists
This section includes the following topics:
■ Guidelines for Creating Playlists
■ Prerequisites for Playlist Creation
■ Creating a Playlist
■ Adding Content Items to a Playlist
■ Changing the Order of Content Items in a Playlist
■ Replacing Content in a Playlist During an Event
■ Creating a Playlist with Looping Content
■ Setting the Item Duration in a Playlist
■ Copying Content From One Playlist to Another
■ Deleting Content Items From a Playlist
■ Deleting a Playlist
Guidelines for Creating Playlists
When creating playlists, consider the following guidelines:
■You cannot have playlists with the same name.
■Each region can have at most one playlist.
■For Proof of Play, you can have more than one region with an ad playlist.
■In all releases of Cisco StadiumVision Director, graphic playlists can only play static graphics and certain.swf files*. Prior to Release 3.1, only video content could be in a video playlist. In Release 3.1 and higher, Cisco StadiumVision Director can support static graphics, and video in mixed media playlists.
IMPORTANT: The SV-4K and DMP-2K media player do not support Flash content. For additional information, refer to allowable Static Graphic Formats.
■Once a playlist displays the last content item in the list, it will loop back to the beginning of the playlist.
■The recommended ad rotation time is 30 seconds. 15 seconds is the minimum supported time for all content. As a best practice, we recommend that you never use less than 15 seconds per playlist content items.
Note : All playlists from all zones/groups for a given event must be loaded on every media player prior to the event.
Each playlist can have its own ad rotation time independent of other playlists.
Content in the playlist is displayed in the order in which it is added unless you re-order your content.
Note : As a series of content items transition in a playlist (such as advertisements in Region 2 of a standard 3-region L-wrap template), there will be some variance in the appearance of each content item as the media player displays where that content is presented. Each content item will generally appear on all corresponding media player displays within about one second of each playlist item transition. However, the amount of time that it takes for all displays in your venue to show the same content item within a playlist might exceed a one-second duration based on the following venue conditions: Network infrastructure, number of regions on the display, number of content items in the playlist, and the playlist duration.
Table 1 provides some guidelines for general playlist support in Cisco Vision Director.
Note : While these limits have been tested with basic Cisco Vision Director operation, the combination of maximum values and complexity of your system and content can potentially impact the actual limit. Therefore, be sure to test your playlist content for expected behavior before using in production.
Table 1 Playlist Guidelines and Limitations
|
|
Number of playlists (any type) in the Cisco Vision Director content database.
|
|
Number of playlists per group.
|
|
Number of items per playlist.
|
|
Number of items of content (any type) used in entire SVD event.
|
|
Number of characters in a playlist name (including spaces).
|
|
Consider the following restrictions and expected behavior when configuring playlists:
■Single video loop—You can configure a playlist to loop continuously when you have a playlist with a single video content item set for a duration of zero, with the playlist duration also set to zero.
■Single non-video loop—You can configure a playlist to loop continuously when you have a playlist with a single non-video content item by setting the item duration to -1, and setting the playlist duration to a number greater than or equal to zero.
■All playlists will loop their content (for example, once the last item plays, the playlist restarts with the first item) unless a duration of zero is configured on the first playlist item.
■To run a playlist one time, you can specify a duration of zero for the last item in the playlist. There is different behavior if the last item is a non-video item versus a video. If the last item has zero duration, and once the rest of the playlist items run, then if the last item is a non-video item, it continuously plays for the duration of the state. If the last item is a video, the video plays one time followed by a black screen for the duration of the state.
■If a change is made to a playlist and the playlist is currently being displayed, it is possible that items in the playlist that are past an item in the playlist with a duration of zero, could get displayed and the playlist continues until the item with zero duration is reached again.
Prerequisites for Playlist Creation
Before you create playlists, be sure that the following conditions are met:
■You are familiar with the playlist content types to specify the appropriate playlist types (Non Video, Video or Mixed Media).
■The content for the playlist is in the Content library.
■You have determined a naming convention to ease identification and management of your playlists.
Creating a Playlist
User Role: Administrator / Content Manager
IMPORTANT: For video walls, the playlist must have the same number of items, and the same duration for each content item. Each list item must be of the same type. For more information, see Prerequisites for Video Walls.
To create a playlist:
1. From the Main Menu (Asset Library) click Playlist > New Playlist. The Create Playlist box appears on the right Figure 3.
2. Specify the Playlist options, see .
a. Type a Name for your playlist.
b. Use the pull-down arrow for Type of media. Best to choose Mixed Media.
Table 2 Playlist Options
|
|
|
(Required) Alphanumeric name for the playlist. Default is "New Playlist."
|
|
Type of content to be used in the playlist:
Non Video —(Default) Static graphics (images) only.
Video or Mixed Media —Video content or combination of video and images.
|
|
Captures a log of items played for advertisement reporting. The default is Yes.
|
|
Length of time (in seconds) for the content item to play. The default is 30 seconds. Value must be an integer—fractions of seconds are not supported.
Note
: See the
Guidelines for Creating Playlists
topic for information about how to properly use an item duration of 0 to loop content.
|
|
(Display field only) Estimates the length of time for all content items to play.
|
Figure 3 Create New Playlist Box
c. Define Default Runtime (if necessary). Cisco default runtime is 30 seconds.
d. Drag and drop content from the Asset Library (Figure 4) or use the Import icon.
e. Enable Proof of Play (check the box) to record the entire event script at your venue.
Figure 4 Importing Content to a Playlist
3. Click Save. The name of the new playlist will display in the text below the Playlist Items dialog box.
Adding Content Items to a Playlist
User Role: Administrator / Content Manager
IMPORTANT: For video walls, the playlist must have the same number of items, and the same duration for each content item. Each list item must be of the same type. For more information, see Prerequisites for Video Walls.
Adding Content Items from the Asset Library (Main Menu) to a Playlist
To add content items to a playlist:
1. From the Main Menu, click Playlist > New Playlist. The Create Playlist box appears on the right (Figure 3).
2. In the Playlists pane, select the Name of the playlist where you want to add content items.
3. In the Asset Items list, select the content item(s) that you want to add to the playlist.
TIP: You can select multiple files using the standard multi-select keyboard strokes. Use the search or sort functions to find the content you want to add to the playlist.
IMPORTANT: Be sure to select content that is formatted for the proper TV display resolution where you will be running the playlist, and that it matches the region size where it will be displayed. For example, if the TV supports 1920x1080 resolution, the content you add to the playlist must be in 1920x1080 format to display properly on the TV screen.
4. Drag and drop files onto the Playlist Items area.
Content is displayed in the order in which it was added. A thumbnail of each piece of content is shown in the Playlist Items box. The header above the playlist box will indicate the number of items in the playlist.
5. (Optional) To duplicate an item in the playlist, select a content item in the Playlist Items panel, and do one of the following:
a. To duplicate an item once —Click the Item duplicate icon.
b. To duplicate an item multiple times —Click the drop-down arrow and select the "Duplicate multiple times" option.
In the Duplicate Contents dialog, specify the number of times that you want to duplicate the item and click Duplicate.
Metadata-Validity and Playability
Tag an asset with metadata comprised of validity and playability information. Add granularity to your asset by configuring exactly when it is effective (validity) and exactly when it can be shown (playability). These values are typically provided by a sponsor or asset provider. But previously, an asset was unrestricted. Now assets are scalable.
To set validity and playability data:
1. Go to: Library > Workspace > Click as Asset. The Metadata window appears.
2. Set values (see Figure 5). Click the Edit icon (pen) at top of panel.
a. For validity, set the Effective Start Date and Effective End Date.
Note : If you do not set this metadata, the default for all content is forever .
Figure 5 Setting Metadata Values
b. If you do not set the end date, it will default to forever.
c. If you do not pick a time, it will default to midnight (12:00 am).
d. Slide Restrict Playback button to enable greater flexibility. The Playable options appear.
Figure 6 Restricting Playback of Content
e. Choose days of the week you want the content to validly play. Previously, the default for content was everyday (always valid); now it’s scalable. Uncheck days you do not want the content to play.
f. Choose Start and End times.
g. Click the Save icon at the top of the panel.
IMPORTANT : No matter where the physical location of the DMP is, once you set the start/stop data, the time you choose is “local” to that DMP, meaning content will play on that DMP at exactly the time you set, even if you are located out of the same time zone from that DMP.
Note : When your content become valid in the script, that content is not instantly valid. Meaning the next time the playlist loops back, the content becomes available (valid and playable).
IMPORTANT : Cisco Vision Director does NOT support a playlist with NO valid content. A playlist has to have at least ONE piece of content that is valid. Therefore the default for all content, unless you set it’s metadata, is always valid.
Adding Static Graphics to a Non-Video Playlist by Direct Upload
You can drag and drop images from the Asset Library to a playlist, or, if you have not already uploaded the content to Cisco Vision Director, you can upload images directly to the playlist.
To directly upload static graphics to a non-video playlist:
1. Go to Main Menu, click Playlist > New Playlist.
2. In the Playlists listing, select the name of the playlist where you want to add images.
TIP: Once you select images to upload, you can change the target playlist name or even create a new playlist for the selected content in the Upload dialog box. You can also create and apply tags to the content.
3. At the top of the Playlist Items pane, click the import icon ( Figure 7).
Figure 7 Import Images Directly to Non-Video Playlist
4. In the Open dialog box, select the images that you want to upload.
TIP: You can also select a compressed.zip file to upload multiple images.
5. Click Open.
6. In the Import Content dialog box ( Figure 8), do the following:
Figure 8 Import Content Dialog Box
a. (Optional) Change the target playlist to another existing playlist, or type the name of a new playlist to be created.
b. (Optional) Apply an existing tag, or create a new tag name to apply to the content.
c. Click Upload.
Changing the Order of Content Items in a Playlist
User Role: Administrator / Content Manager
Content is displayed in the order in which it is added.
TIP: If you do not want a specific order of items, you can click Randomize to put the content items into an arbitrary order.
To change the order of content items in a playlist:
1. Go to Main Menu, click Playlist.
2. Go to List view.
3. In the Playlist Items list, select the content item that you want to move and drag and drop it into the desired position in the list. If you place the thumbnail of the content on top of another thumbnail, they swap positions.
Replacing Content in a Playlist During an Event
User Role: Administrator / Content Manager
You can perform content updates in a playlist during content presentation as long as you follow important guidelines.
Restrictions for Event-Time Content Replacement
CAUTION: Event-Time Content Replacement should be used with care if you are using Proof of Play due to impact of Proof of Play reporting if changes are made while a script is running. The cost-benefit of replacing content versus PoP impact should be weighed. Once an updated event script has stopped running, the PoP will operate normally upon re-running of the script.
Before replacing content in a playlist during an event, consider the following restrictions:
■Avoid making the following types of playlist updates when using replacing content that is using Proof of Play:
–Adding items to the end of a playlist—The new item will show up in the PoP raw data, but not the detailed report.
–Removing an item from a playlist—Synchronization of the PoP reporting will be mismatched.
■ The replacement content file name must be unique. Do not re-import content using the same file name as any existing playlist content item.
The best practice is to Import the content item with a new file name and add it to the playlist before removing the content item to be replaced. See Figure 9 for an illustration of the recommended workflow to preserve PoP reporting.
■Widgets are not supported for event-time content replacement.
■Content replacement can negatively impact video content synchronization and is not recommended. If you must consider this, plan to have non-video content available as the replacement.
■Content replacement for the SV-4K is only supported through an update of the playlist. Performing content replacement from the Control screen using the content replacement icon is not supported on the SV-4K.
Figure 9 Replacement of Existing Content Item
Creating a Playlist with Looping Content
User Role: Administrator / Content Manager
Once a playlist displays the last content item in its list, it will automatically loop, or replay content from the beginning of the playlist, as long as an item duration of 0 is not specified for the first content item.
For playlists with only a single video or non-video item, you need to be sure that the item duration and playlist duration to specific values to achieve a continuous replay (loop) of the playlist.
To create a playlist with looping content:
1. Go to Main Menu, click Playlist.
2. Click Split.
3. Select an existing playlist or create a new one.
4. Add content items to the playlist. For more information, see Adding Content Items to a Playlist.
5. In the Playlist Items panel, select the list icon so that you can see the content items detail, including the item Duration.
6. Select the playlist that you want to modify and do the following:
a. To loop a playlist with multiple content items —Automatic. Be sure that the item duration for the first content item in the playlist is not 0.
b. To loop a playlist with a single, non-video item —Set the Default Item Duration for the playlist to a value greater than or equal to 0 and set the item duration to -1. See Figure 10.
Figure 10 Duration Values to Loop Single-Item Non-Video Playlist
c. To loop a playlist with a single, video item —Set both the Default Item Duration and item Duration to a value of 0 ( Figure 11).
IMPORTANT: When looping a single video item of 0 duration, be aware that content synchronization is lost on the SV-4K media player.
Figure 11 Duration Values to Loop Single-Item Video Playlist
7. Click Update for an existing playlist, or Save for a new one.
Setting the Item Duration in a Playlist
User Role: Administrator / Content Manager
IMPORTANT: For video walls, the playlist must have the same number of items and the same duration for each content item.
The Default Item Duration is set in the Playlist Details panel. The default value is 30 seconds.
When you add non-video content items to the playlist, the value set in the Default Item Duration is used by default. In list view, you will see an item duration value of -1 (ignore) for the content item, which means that the default item duration set for the playlist is used.
Video content items use the length of the video as their default duration when added to a playlist.
To set the item duration in a playlist:
1. Go to Event Management > Control Panel > Content.
2. Go to Playlist or Split view.
3. Select the existing playlist or create a new one.
4. Add content items to the playlist. For more information, see Adding Content Items to a Playlist.
5. In the Playlist Items panel, select the list icon so that you can see the content items detail, including the item Duration ( Figure 12).
Figure 12 Playlist Item Duration
6. Click the item Duration cell for the content item that you want to modify.
7. Type a value or use the spinner controls to set the item duration (in seconds), using the following guidelines:
a. For advertisements —Set a value of 15 (recommended).
b. To use the Default Item Duration set in the playlist properties —Use a value of -1 (This is the default).
c. To run a playlist one time (where last content-item is non-video) —Set a value of 0 for the last non-video content item.
The content will play one time, and the last non-video item will run until the end of the Event state.
IMPORTANT: If the last content item is a video, then the video will play one time and a black screen is displayed for the remainder of the Event state.
d. To loop a playlist with multiple content items —Automatic. Be sure that the item duration for the first content item in the playlist is not 0.
e. To loop a playlist with a single, non-video item —Set the Default Item Duration for the playlist to a value greater than or equal to 0 and set the item duration to -1.
f. To loop a playlist with a single, video item —Set both the Default Item Duration and item Duration to a value of 0.
8. Click Update for an existing playlist, or Save for a new one. For more information about creating playlists with looping content, see Creating a Playlist with Looping Content.
Copying Content From One Playlist to Another
User Role: Administrator / Content Manager
You can easily copy content from one playlist to another. This task is useful for video walls or other groups of TV displays where you want to show identical content.
To copy content from one playlist to another:
1. Go to Event Management > Control Panel > Content.
2. Click Playlist.
3. Create the new playlist if it does not already exist.
4. Select the name of the playlist that you want to copy content items from.
TIP: Use the Search box to find a playlist.
5. In the Playlist Items panel, select all of the items.
6. Drag and drop the content items to the target playlist in the Playlists panel where you want to copy the content.
7. Specify the Playlist options (see Table 3).
Table 3 Specify Playlist Options
|
|
|
(Required) Alphanumeric name for the playlist. Default is "New Playlist."
|
|
Type of content to be used in the playlist:
Non Video —(Default) Static graphics (images) only.
Video or Mixed Media —Video content or combination of video and images.
|
|
Captures a log of items played for advertisement reporting. The default is Yes.
|
|
Length of time (in seconds) for the content item to play. The default is 30 seconds.
Note
: See the
Guidelines for Creating Playlists
topic for information about how to properly use an item duration of 0 to loop content.
|
|
(Display field only) Estimates the length of time for all content items to play.
|
8. Click Save. The name of the new playlist will display in the text below the Playlist Items dialog box. Since you have not yet added items to the playlist, (0 Items) are indicated.
Deleting Content Items From a Playlist
User Role: Administrator / Content Manager
When you delete an item from a playlist, the item remains in the content library and is only removed from the playlist.
To delete an item from a playlist:
1. Go to Control Panel > Content.
2. In the Playlist listing, select the playlist where you want to delete a content item.
3. In the Playlist Items panel, select the content item that you want to delete.
4. Click Delete Playlist Item.
IMPORTANT: There are two delete buttons that pertain to playlists—one to delete the actual playlist itself (Delete Playlist) and one to delete items in a playlist (Delete Playlist Item). Be sure to choose the correct button.
5. In the confirmation dialog box, click Delete to remove the item.
Deleting a Playlist
User Role: Administrator / Content Manager
When you delete a playlist, the playlist is permanently removed from the content library. However, the content items in the playlist are still available to you in the content library.
To delete a playlist:
1. Go to Event Management > Control Panel > Content.
2. In the Playlist listing, select the playlist that you want to delete.
3. In the Playlist Items panel, select the content item that you want to delete.
4. Click Delete Playlist.
5. In the confirmation dialog box, click Yes to remove the playlist.