Cisco Vision Network, Server, and Video Headend Requirements Guide, Release 6.3
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 28, 2020
Chapter: Appendix B: Bill of Material
Appendix B: Bill of Material
Large Server Bill of Material
Note: The Bill of Material (BOM) only shows the server configuration and excludes the Cisco Vision Dynamic Signage Director, DMPs, and other system licenses.
In this BOM, RAID 5 setting instead of RAID 10 is shown, but this is due to limited selection options in the ordering tool. During deployment, use RAID 10, which can be enabled via the MegaRAID BIOS directly (not through CIMC).
Standard Server Bill of Material
Note: The Bill of Material (BOM) only shows the server configuration and excludes the Cisco Vision Dynamic Signage Director, DMPs, and other system licenses.
In this BOM, RAID 5 setting instead of RAID 10 is shown, but this is due to limited selection options in the ordering tool. During deployment, use RAID 10, which can be enabled via the MegaRAID BIOS directly (not through CIMC).
Small Server Bill of Material
Note: The BOM only shows the server configuration and excludes the Cisco Vision Dynamic Signage Director, DMPs, and other system licenses.
Mini Server Bill of Material
Note: The BOM only shows the server configuration and excludes the Cisco Vision Dynamic Signage Director, DMPs, and other system licenses.
Feedback