The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This module describes the default system accounts implemented by Cisco Vision Dynamic Signage Director for access and control of certain server functions. Aside from the admin account, these system accounts are generally separate from the user accounts that secure access to the Cisco Vision Dynamic Signage Director feature configuration and operation.
In addition, only a few of these accounts are intended for general modification after installation of the server. Other system accounts are reserved for special services or technical support and should not be modified unless you are instructed to do so, or you otherwise understand the impact to your server installation.
For information about user accounts and Role-Based Access Control (RBAC) in Cisco Vision Dynamic Signage Director, see User Management in Cisco Vision Dynamic Signage Director.
All of the system accounts are automatically implemented upon installation of the Dynamic Signage Director software.
This section provides an overview of the default system accounts in Cisco Vision Dynamic Signage Director:
Table 1 describes the common system accounts for Cisco Vision Dynamic Signage Director that are intended for you to modify after deployment of your server, and on which server platform they are supported. These common system accounts are automatically implemented upon installation of the Dynamic Signage Director software.
|
Cisco Vision Dynamic Signage Director |
|
|
|
|
1.For more information on the administrator role in Cisco Vision Dynamic Signage Director, see User Management in Cisco Vision Dynamic Signage Director. 2.For more information about the TUI, see Cisco Vision Dynamic Signage Director Server Text Utility Interface. |
Table 2 describes some other default system accounts that are reserved for use in Cisco Vision troubleshooting or other specialized access.
|
|
|
|
|
|
|
|
3.For more information about the Media Planner Import API and other API support in Cisco Vision Dynamic Signage Director, see the Cisco Vision Director Operation Guide. |
You can change system account passwords from the defaults in Cisco Vision Dynamic Signage Director using the TUI.
Note: To navigate through the TUI menus you must type the character that corresponds to the menu area where you want to go (a, b, c, and so on) and press Enter. To return to other menus, you must back out of the hierarchy of menus using one of the indicated keys to return you to prior menus.
To change system account passwords:
1. On the Cisco Vision Dynamic Signage Director, log into the TUI by doing the following:
a. Use a directly connected console, or use an SSH client from a laptop computer that is connected to the Cisco Vision Dynamic Signage Director network to run a secure login to the primary Cisco Vision Dynamic Signage Director server using the IP address for your server.
b. When the login prompt appears, enter the installer userid followed by the installer password at the password prompt.
2. From the Main Menu, go to System Accounts.
3. Select the system account whose password you want to change.
4. At the prompt, type the new password.
5. When prompted to confirm, retype the password.