The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
First Published: August 12, 2014
This module describes how to perform a manual backup and restore, and how to setup automatic data archiving, and contains the following sections:
The following data is copied during a backup:
It is recommended to perform a backup periodically, and prior to upgrading the Cisco StadiumVision Mobile Streamer software.
The following commands allow a user on a desktop/laptop computer with an ssh/scp client to backup and restore a Cisco StadiumVision Mobile Streamer. This procedure must be performed using an SNE TAC account. The operator must enter the password set by the SNE TAC account.
To backup the Cisco StadiumVision Mobile Streamer, use the following command:
The file "mybackup.cfg" can be any name. It is recommended to use a descriptive name.
To restore the Cisco StadiumVision Mobile Streamer, use the following procedure:
On a nightly basis, backups are done of the Cisco StadiumVision Mobile Streamer configuration files. The file archives are automatically removed from the StadiumVision Mobile Streamer after 20 days.
Step 1 To access the TUI, you need either physical console access or an SSH client such as PUTTY. Log in from the console or over SSH with the following credentials, using the IP address of the Cisco StadiumVision Mobile Streamer:
username = installer
password = cisco!123
Step 2 From the Main Menu, go to Server Administration > Setup automatic data archive .
Figure 1 TUI Setup Automatic Data Archive
Step 3 At the prompt, enter the username to be used for the backup.
Step 4 Enter the IP address of the original Cisco StadiumVision Mobile Streamer server.
Step 5 Enter the IP address of the destination Cisco StadiumVision Mobile Streamer server.
The Cisco StadiumVision Mobile Streamer automatically deletes backup files after 20 days. However, you should continue to monitor disk space because this removal is based on a time period and is not run based on any automatic monitoring of disk space.
You can use the Disk Monitoring option from the TUI Troubleshooting menu (shown in Figure 2) to get file system usage.
Figure 2 TUI File System Disk Usage