- Preface
- Getting Started Installing or Upgrading Cisco StadiumVision Director
- Installing Cisco StadiumVision Director for the First Time
- Upgrading a Cisco StadiumVision Director from Release 3.1 SP2 to Release 3.2
- Verifying the Upgrade
- Using the Software Manager to Upgrade Cisco StadiumVision Director Release 3.2 Software, Language Packs, and Fonts
- Upgrading the DMP Firmware
- Appendix A: Post-Upgrade Checklist
- Appendix B: Port Reference
- Appendix C: Installing Additional Hard Drives in the Platform 2 Server to Prepare for Upgrade to Release 3.2
- Appendix D: CIMC Configuration and Firmware Upgrade Guidelines on the Cisco UCS C220 Server
- Appendix E: Using the TUI Upgrade Utility to Upgrade the Cisco StadiumVision Software
Preface
This document describes the requirements and tasks to install and upgrade the software for Cisco StadiumVision Director Release 3.2.
The content is intended for Cisco StadiumVision system administrators and technical field engineers who are responsible for designing and deploying Cisco StadiumVision solutions. It is expected that readers of this document are familiar with basic IP networking and Linux, have a general understanding of the sports and entertainment business, and understand the objectives and operations of live events.
Document Revision History
Table 1 lists the technical changes made to this document since it was first published.
|
|
|
|---|---|
Added updates to the Using the Software Manager to Upgrade Cisco StadiumVision Director Release 3.2 Software, Language Packs, and Fonts, including a new required task for reactivating custom fonts after upgrade. |
|
The following changes were made:
|
|
The following changes were made:
|
|
Added emphasis of existing requirement for all users to clear browser cache after upgrade to prevent database corruption in the Verifying the Upgrade and the Appendix A: Post-Upgrade Checklist. |
|
First release of this document for Cisco StadiumVision Director Release 3.2 |
Document Organization
|
|
|
|---|---|
“Getting Started Installing or Upgrading Cisco StadiumVision Director” |
Provides information that you should read before you perform an initial installation or upgrade of the Cisco StadiumVision Director Release 3.2 software. |
“Installing Cisco StadiumVision Director for the First Time” |
Describes how to install the Cisco StadiumVision Director Release 3.2 software on your newly-purchased Platform 3 server hardware from a full ISO image. |
“Upgrading a Cisco StadiumVision Director Server from Release 3.1 SP2 to Release 3.2” |
Describes how to upgrade a Cisco StadiumVision Director server previously installed with Release 3.1.0-797 (SP2) to Cisco StadiumVision Director Release 3.2. |
Describes how to verify that the upgrade process was successful. |
|
“Using the Software Manager to Upgrade Cisco StadiumVision Director Release 3.2 Software, Language Packs, and Fonts” |
Describes how to upgrade a Cisco StadiumVision Director server already running Cisco StadiumVision Director 3.2 to a later release of Cisco StadiumVision Director software, as well as how to install language packs and fonts. |
Describes how to upgrade the DMP firmware on the Cisco DMP 4310G. |
|
Provides a checklist that is useful after you upgrade your software on a Cisco StadiumVision Director server. |
|
“Appendix C: Installing Additional Hard Drives in the Platform 2 Server to Prepare for Upgrade to Release 3.2” |
Describes how to install two additional 300 GB hard drives (SV-FRU2-HD3G=) for another RAID 1 volume in the Cisco StadiumVision Director Platfrom 2 Server which are required to run Cisco StadiumVision Director Release 3.2 with a minimum of 4 drives. |
“Appendix D: CIMC Configuration and Firmware Upgrade Guidelines on the Cisco UCS C220 Server” |
Provides guidelines for configuring the Cisco Integrated Management Controller (CIMC) interface and performing the initial configuration, and upgrading the CIMC/BIOS firmware on the Cisco UCS C220 servers for Cisco StadiumVision Director (SV-DIR-DIRECTOR-K9, SV-PLATFORM3=). |
“Appendix E: Using the TUI Upgrade Utility to Upgrade the Cisco StadiumVision Software” |
Describes how to upgrade an existing Cisco StadiumVision Directer server to a later version, including installation of service packs. This procedure is also referred to generally as an ISO upgrade to refer to both the service pack and upgrade ISO process. |
Related Documentation
- Release Notes for Cisco StadiumVision Director Release 3.2
- Cisco StadiumVision Director Server Administration Guide, Release 3.2
- Cisco StadiumVision Director Localization Guide, Release 3.2
- For the listing page of all Cisco StadiumVision documentation, go to:
http://www.cisco.com/c/en/us/support/video/stadiumvision/tsd-products-support-series-home.html
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
Feedback