Provides commands for monitoring and maintaining LLDP.
Commands for monitoring and maintaining LLDP.
| Command |
Description |
|---|---|
| clear LLDP counters |
Resets the traffic counters to zero. |
| clear LLDP table |
Deletes the LLDP neighbor information table. |
| show LLDP |
Displays global information, such as frequency of transmissions, the holdtime for packets being sent, and the delay time before LLDP initializes on an interface. |
| show LLDP entry entry-name |
Displays information about a specific neighbor. You can enter an asterisk (*) to display all neighbors, or you can enter the neighbor name. |
| show LLDP interface [interface-ID] |
Displays information about interfaces with LLDP enabled. You can limit the display to a specific interface. |
| show LLDP neighbors [interface-ID] [detail] [TLV-dump] |
Displays information about neighbors, including device type, interface type and number, holdtime settings, capabilities, and port ID. You can limit the display to neighbors of a specific interface or expand the display for more detailed information. The TLV-dump option displays LLDP TLV attributes. |
| show LLDP traffic |
Displays LLDP counters, including the number of packets sent and received, number of packets discarded, and number of unrecognized TLVs. |
| show CIP object LLDP-management instance |
Displays CIP LLDP management and data objects. |
| show CIP object LLDP-management class |
|
| show CIP object LLDP-datatable instance <0-1000> |
|
| show CIP object LLDP-datatable class |