Cisco MDS 9509 Multilayer Director
Product Image Not Available
Specifications Overview
| Series | Cisco MDS 9500 Series Multilayer Directors |
|---|---|
| Overview | Product Overview |
| Status |
End of Support
EOL Details
|
| Release Date | 20-AUG-2002 |
| End-of-Sale Date | 28-APR-2014 Details |
| End-of-Support Date | 30-APR-2019 Details |
| Product ID | |
| Compatibility | |
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
This product is no longer Supported by Cisco.
-
Top Search Results
My Recently Viewed
- Recently viewed documents for this product will appear here.
Document Categories-
At-a-Glance
- Cisco MDS 9000 Family 8-Gbps Advanced Fibre Channel Switching Modules (PDF - 198 KB)
- Cisco Smart Zoning for Cisco NX-OS SAN Fabrics (PDF - 344 KB)
-
Case Studies
- Boeing Boosts Network Performance While Reducing Costs (PDF - 270 KB)
- Case Study: Mediapro Grows Revenue from Internet Streaming (PDF - 303 KB)
-
Configuration Examples and TechNotes
-
Data Sheets
- Cisco MDS 9513 Multilayer Director Data Sheet
- Cisco MDS 9506 Multilayer Director Data Sheet
- Cisco MDS 9500 Series Supervisor-2 Module
- Cisco MDS 9500 Series Supervisor-2A Module
- Cisco MDS 9000 18/4-Port Multiservice Module
- Cisco MDS 9000 16-Port Storage Services Node Data Sheet
- Cisco MDS 9000 10-Gbps 8-Port FCoE Module
- Cisco MDS 9000 Family 8-Gbps Advanced Fibre Channel Switching Modules
- Cisco MDS 9000 Family 8-Gbps Fibre Channel Switching Modules Data Sheet
- Cisco MDS 9000 Family Pluggable Transceivers Data Sheet
-
End-of-Life and End-of-Sale Notices
English
- End-of-Sale and End-of-Life Announcement for the Cisco MDS 4 Gbps Fibre Channel-SW SFP
- End-of-Sale and End-of-Life Announcement for the Cisco MDS 9500 Family Fiber Channel Switching Modules: 8-Gbps Advanced Switching Modules, SSN-16 Module, Supervisor-2A, Fabric 3
- End-of-Sale and End-of-Life Announcement for the Cisco MDS 9506 Multilayer Director
- End-of-Sale and End-of-Life Announcement for the Cisco MDS 9513 Multilayer Director
- EoS/EoL Cisco MDS 9500 Series Power Supplies
- EOS and EOL Announcement for the Cisco MDS 9500 Series 2500W AC Power Supply
- End-of-Life Announcement For Cisco iSCSI Drivers
- EOS & EOL for the Cisco MDS 9000 Port Analyzer Adapter, Base
- End-of-Sale and End-of-Life Announcement for the Cisco MDS 9509 Multilayer Director
- End-of-Sale and End-of-Life Announcement for the Cisco MDS 9509 Power Supply
French - Canadian
- Annonce d’arrêt de commercialisation et de fin de vie de Cisco MDS 4 Gbps Fibre Channel-SW SFP
- Annonce d’arrêt de commercialisation et de fin de vie des modules de commutation Fiber Channel Cisco MDS de gamme 9500: modules de commutation avancés 8-Gbps, module SSN-16, superviseur-2A, trame 3
- Annonce d’arrêt de commercialisation et de fin de vie de Cisco MDS 9506 Multilayer Director
- Annonce d’arrêt de commercialisation et de fin de vie de Cisco MDS 9513 Multilayer Director
- EOS/EOL for the Cisco MDS 9000 Family Advanced Services Module
- EoS/EoL for the Cisco MDS 9000 Family 4-port IP Storage Services Module
-
Field Notices
Cisco MDS 9513 Multilayer Director
- Field Notice: FN - 63133 - MDS9000 - Generation 1 Linecards May Reload Unexpectedly When They Fail the OHMS Bootflash Test - Issue is Only Applicable to MDS Generation 1 Linecards Running SAN OS Code Prior to 3.3(1c)
- Field Notice: FN - 63099 - MDS9000 - Generation 1 Modules May Reload During a Non-disruptive SAN-OS Upgrade Due to Compact Flash Being Unable to Partition for New Code - Issue Has Been Addressed for Upgrades from SAN-OS 3.3.1 or Higher Releases
- Field Notice: FN - 63051 - MDS9000 - The DPVM Process May Terminate Unexpectedly Under Certain Conditions - This Issue Has Been Fixed in SAN-OS 3.1.1 and Later Releases - Customer Can Either Upgrade or Follow the Provided Procedure to Resolve the Issue
- Field Notice: FN - 63018 - Performance and Scalability Issues Observed in MDS9000 Fabric Manager Due to Database Limitations - Upgrading to Cisco Fabric Manager Version 3.2 (2c) or Later Resolves the Issue
- Field Notice: FN - 63019 - Under Rare Conditions, a Non-disruptive Upgrade of a DS-C9506, DS-C9509 or DS-C9513 to SAN-OS 3.1(1) through 3.2 (2c) or a Subsequent Switchover May Cause the Switch to Reboot - Workaround Provided to Resolve the Issue
- Field Notice: FN - 63017 - Some DS-X9032-SSM Modules Were Mistakenly Shipped with Two Partitions on the Flash Memory Instead of Three, Which is Required for Running Advanced Applications in L3 Mode - Procedure Provided to Create the Third Partition on the Flash Memory
- Field Notice: FN - 63001 - Small Probability That Some Generation 2 Modules, DS-X9112, DS-X9124, DS-X9148 or DS-X9704 May Reload When Upgrading to SAN-OS 3.0(x), SAN-OS 3.1(x), or SAN-OS 3.2(1a) - Upgrade to SAN-OS 3.2 (2c) or a Later Release Resolves the Issue
- Field Notice: FN - 62858 - Creating Port Channel ID Greater Than 128 In a Mixed Generation 1 And Generation 2 Line Card Environment Powers Down Generation 1 Line Cards, After a Hitless Upgrade From SAN-OS Release 2.(X) to 3.0 or 3.1
Cisco MDS 9506 Multilayer Director
- Field Notice: FN - 63504 - IVR and FCR Applications May Not Work With Specific MDS Gen 3 Linecards/Modules, MDS9222i Switch, and MDS 18/4 Cards Running Older Software
- Field Notice: FN - 63133 - MDS9000 - Generation 1 Linecards May Reload Unexpectedly When They Fail the OHMS Bootflash Test - Issue is Only Applicable to MDS Generation 1 Linecards Running SAN OS Code Prior to 3.3(1c)
- Field Notice: FN - 63099 - MDS9000 - Generation 1 Modules May Reload During a Non-disruptive SAN-OS Upgrade Due to Compact Flash Being Unable to Partition for New Code - Issue Has Been Addressed for Upgrades from SAN-OS 3.3.1 or Higher Releases
- Field Notice: FN - 63051 - MDS9000 - The DPVM Process May Terminate Unexpectedly Under Certain Conditions - This Issue Has Been Fixed in SAN-OS 3.1.1 and Later Releases - Customer Can Either Upgrade or Follow the Provided Procedure to Resolve the Issue
- Field Notice: FN - 63018 - Performance and Scalability Issues Observed in MDS9000 Fabric Manager Due to Database Limitations - Upgrading to Cisco Fabric Manager Version 3.2 (2c) or Later Resolves the Issue
- Field Notice: FN - 63019 - Under Rare Conditions, a Non-disruptive Upgrade of a DS-C9506, DS-C9509 or DS-C9513 to SAN-OS 3.1(1) through 3.2 (2c) or a Subsequent Switchover May Cause the Switch to Reboot - Workaround Provided to Resolve the Issue
- Field Notice: FN - 63017 - Some DS-X9032-SSM Modules Were Mistakenly Shipped with Two Partitions on the Flash Memory Instead of Three, Which is Required for Running Advanced Applications in L3 Mode - Procedure Provided to Create the Third Partition on the Flash Memory
- Field Notice: FN - 63001 - Small Probability That Some Generation 2 Modules, DS-X9112, DS-X9124, DS-X9148 or DS-X9704 May Reload When Upgrading to SAN-OS 3.0(x), SAN-OS 3.1(x), or SAN-OS 3.2(1a) - Upgrade to SAN-OS 3.2 (2c) or a Later Release Resolves the Issue
- Field Notice: FN - 62858 - Creating Port Channel ID Greater Than 128 In a Mixed Generation 1 And Generation 2 Line Card Environment Powers Down Generation 1 Line Cards, After a Hitless Upgrade From SAN-OS Release 2.(X) to 3.0 or 3.1
- Field Notice: FN - 72015 - Specific Releases of Data Center Network Manager Release 7.X Affected by Adobe Flash End-of-Life - Software Upgrade Recommended
- Field Notice: FN - 63157 - In Rare Situations Repeated show tech Commands May Cause an MDS Supervisor to Reboot When Running San OS 3.0(x) to 3.1(x)
-
Troubleshooting TechNotes
-
White Papers
- Cisco MDS 9000 10-Gbps 8-Port FCoE Module (PDF - 221 KB)
- Cisco MDS 9000 Family Configurable Fibre Channel Fabric Switches (PDF - 218 KB)
- Cisco Storage Leadership - Storage Magazine Article on Cisco vs Competition (PDF - 261 KB)
- Cisco TrustSec Fibre Channel Link Encryption White Paper
- Disaster Recovery Solution for SAP Using Virtualization Technology (PDF - 625 KB)
- High-Availability Storage Networks with Cisco MDS 9500 Series Multilayer Directors
- Miercom Report on Performance Tests for Cisco MDS 9509 and 9513 (PDF - 378 KB)
- VMware vSphere Data Protection and Security Compliance for Cisco/Emulex SANs (PDF - 5 MB)
Dimensions (H x W x D)24.5 x 17.37 x 18.4 in. (62.23 x 44.12 x 46.74 cm)Maximum Number of Ports per Switch336 1/2/4-Gbps Fibre Channel portsMax Buffer Credits per port4095
