Cisco BPX 8600 Modules
Product Image Not Available
Specifications Overview
| Series | Cisco WAN Switching Modules |
|---|---|
| Product ID | |
| Status |
End of Support
EOL Details
|
| End-of-Sale Date | 14-JAN-2005 Details |
| End-of-Support Date | 14-JAN-2010 Details |
-
Document Categories-
Compatibility Information
-
Configuration Examples and TechNotes
-
Configuration Guides
-
End-of-Life and End-of-Sale Notices
-
Feature Guides
-
Field Notices
- Field Notice: BCC-3 External Clock - Bad Clock Path Error
- Field Notice: *Expired* FN - 19331 - IGX-URM IOS Incompatibility May Prevent Bootup
- Field Notice: ABR Traffic Continuity Problem after switchyred
- Field Notice: APS on BXM Needs Hardware Revision E for OC12 andHardware Revision C for E3, T3, and OC3
- Field Notice: BPX Unable to Reroute Connections to a Trunk with the Maximum Channels Set to a Maximum Value
- Field Notice: BXM Logs Continuous Yellow Alarm
- Field Notice: MCD Firmware Preferred for BXM Hardware J or M (BXM-622) or Later
- Field Notice: Standby Broadband Controller Card (BCC) Goes into UP Failure When Primary Clock Goes into Alarm
-
Install and Upgrade Guides
- AUSM/B-8T1E1 Interface Characteristics
- BPX Node Specifications
- Card Features : ASI-155
- Downloading Software and Firmware using CWM
- Downloading and Installing Firmware-Release 2.0
- Finishing the Installation of BPX Cards
- PXM45 Hardware Specifications
- PXM45 Installation
- PXM1 Installation
- Redundancy for Service Modules
- Software Advisor- Choose The Software For Your Network Device
- T1 Interface Card (BC-T1)
- VISM Installation and Configuration, Release 1.0
-
Troubleshooting Guides
Troubleshooting Tools
-
Troubleshooting TechNotes
- B-Frame Parity Errors
- BPX TX BIP-16 Errors
- Bus Parity Errors
- Configuring and Troubleshooting ATM Connection Configurations and Cisco BPX 8600 Series Switches
- Explanation of an Abort 1M3 (1000003)
- How to Tell BXM-E Cards from BXM Cards
- How to determine the Length of Time a BPX BCC Processor Has Been Active
- Rx BIP-16 Errors
- Software Error 514
- Software Error 364
- Standby PRBS Errors
- Troubleshooting PVC Problems
- Understanding BXM Card Error ST Err: OBJ ID:30 Err:0x00000001
-
White Papers
-
-
-
Contact Cisco
Technical Support
- Open a TAC Case Online
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
Technical Sales Questions
- Contact Us for Sales Questions
- Call 1 800 553 6387
- US/CAN | 5am - 5pm Pacific
- Other Countries
Feedback