Contents

Introduction

Structure

Client

RRM

Channel changes

Noise and interference values

DCA algorithm running

Introduction

This document describes quick references on listing historical events with the Catalyst 9800.

Structure

By leveraging the always-on logging capabilities of the 9800 platform, you can list events of a particular kind quickly and easily, provided that you know how the specific log lines looks like.

This article revolves around the use of the "show logging profile wireless" command mostly which goes through all the wireless related binary logs (that are always-on, even without enabling any form of active debugging).

The "start last <time period>" allows to go back until a certain period in the logs.

The command will output a lot of data on the terminal if you do not use the pipe to restrict your search, this is why all the examples use the pipe with specific events.

Client

Listing association requests received by an AP from a particular client during a specific amount of time:

myc9800-CL#show logging profile wireless start last 1 hour filter mac 9418.6548.6fb1 | i Association received | MY_AP

2024/07/30 08:55:58.981172447 {wncd_x_R0-0}{1}: [client-orch-sm] [19389]: (note): MAC: 9418.6548.6fb1 Association received. BSSID 38ed.18cb.d7cf, WLAN opendb, Slot 1 AP 38ed.18cb.d7c0, MY_AP, Site tag default-site-tag, Policy tag default-policy-tag, Policy profile test, Switching Central, Socket delay 0ms

Listing clients that authenticated successfully:

myc9800-CL#show logging profile wireless start last 10 days | i Authentication Success

2020/09/26 16:41:21.397677 {wncd_x_R0-0}{1}: [ewlc-infra-evq] [19680]: (note): Authentication Success. Resolved Policy bitmap:11 for client 02c0.2901.34c8

2020/09/26 17:04:33.523999 {wncd_x_R0-0}{1}: [ewlc-infra-evq] [19680]: (note): Authentication Success. Resolved Policy bitmap:11 for client d280.eb73.6044

2020/09/26 17:21:59.892585 {wncd_x_R0-0}{1}: [ewlc-infra-evq] [19680]: (note): Authentication Success. Resolved Policy bitmap:11 for client 02c0.2901.34c8

2020/09/26 17:32:09.289109 {wncd_x_R0-0}{1}: [ewlc-infra-evq] [19680]: (note): Authentication Success. Resolved Policy bitmap:11 for client 02c0.2901.34c8

2020/09/26 17:41:58.123180 {wncd_x_R0-0}{1}: [ewlc-infra-evq] [19680]: (note): Authentication Success. Resolved Policy bitmap:11 for client 64b5.c66d.13ac

Listing clients that got a successful IP address:

myc9800-CL#show logging profile wireless start last 10 days | i IP learn successful

2020/09/26 16:41:30.621520 {wncd_x_R0-0}{1}: [client-iplearn] [19680]: (note): MAC: 02c0.2901.34c8  Client IP learn successful. Method: DHCP IP: 192.168.1.13

2020/09/26 17:04:37.622905 {wncd_x_R0-0}{1}: [client-iplearn] [19680]: (note): MAC: d280.eb73.6044  Client IP learn successful. Method: IP Snooping IP: 192.168.1.36

2020/09/26 17:22:03.830465 {wncd_x_R0-0}{1}: [client-iplearn] [19680]: (note): MAC: 02c0.2901.34c8  Client IP learn successful. Method: IP Snooping IP: 192.168.1.13

2020/09/26 17:32:09.966598 {wncd_x_R0-0}{1}: [client-iplearn] [19680]: (note): MAC: 02c0.2901.34c8  Client IP learn successful. Method: IP Snooping IP: 192.168.1.13

2020/09/26 17:33:30.236544 {wncd_x_R0-0}{1}: [client-iplearn] [19680]: (note): MAC: 3cf7.a4ae.f607  Client IP learn successful. Method: IP Snooping IP: 192.168.1.49

RRM

Channel changes

9800# show logging profile wireless | include history-channel

2020/02/13 10:50:03.297 {wncd_x_R0-0}{2}: [radio-history-channel] [24955]: (note): Channel change for AP5c83.8f6e.4250 Slot:1 Band:802.11a Previous Chan:100 Current Chan:132 chan width: 40 Reason: DCA Algorithm

Noise and interference values

This would require to set "set platform software trace wireless chassis active r0 rrm rrm-client-dca info" in order to display the info in logs:

9800#show logging profile wireless start last x hours| include rrm-client-dca

2020/06/26 15:44:08.636988 {wncd_x_R0-0}{1}: [rrm-client-dca] [9853]: (info): f4bd.9e38.4200 (Radio: 802.11a) Channel set request: on cell to channel 40 from 40 (width 20) to reduce co-channel interference (noise/interference/rssi) from (-128,-128,127) to (-128,-128,127) Reason: 0x1 for slot id: 1

2020/06/26 15:44:08.640828 {wncd_x_R0-0}{1}: [rrm-client-dca] [9853]: (info): f4bd.9e38.4200 (Radio: 802.11bg) Channel set request: on cell to channel 6 from 1 (width 20) to reduce co-channel interference (noise/interference/rssi) from (-77,-35,-35) to (-66,-58,-57) Reason: 0x4 for slot id: 0

2020/06/26 15:54:18.671638 {wncd_x_R0-0}{1}: [rrm-client-dca] [9853]: (info): f4bd.9e38.4200 (Radio: 802.11a) Channel set request: on cell to channel 40 from 40 (width 20) to reduce co-channel interference (noise/interference/rssi) from (-128,-128,127) to (-128,-128,127) Reason: 0x1 for slot id: 1

2020/06/26 15:54:18.673055 {wncd_x_R0-0}{1}: [rrm-client-dca] [9853]: (info): f4bd.9e38.4200 (Radio: 802.11bg) Channel set request: on cell to channel 6 from 6 (width 20) to reduce co-channel interference (noise/interference/rssi) from (-128,-128,-58) to (-128,-128,-58) Reason: 0x1 for slot id: 0

DCA algorithm running

9800-17#show logging profile wireless start last boot | i Running DCA Algo

2020/02/14 16:23:09.177 {rrm_bg_R0-0}{1}: [rrm-mgr-dca] [22117]: (note): (Radio: 802.11a) Running DCA Algorithm