PDF(66.2 KB) View with Adobe Reader on a variety of devices
ePub(126.7 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(120.1 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 10, 2018
Wireless Radio Settings on AP541N Access Point
The range of available channels in an access point is determined by the mode of the wireless radio interface. Wireless radio settings allow you to modify domain support, the wireless mode, and the channel settings. Wireless Radio Settings directly control the behavior of the wireless radio devices with the Access Point (AP) and its interaction with the physical medium. The access point can support list of channels and transmit power of the wireless radio. This process varies from place to place.
This document explains how to adjust the wireless radio spectrum settings on AP541N Access Point.
• AP541N Access Point
Wireless Radio Settings
Step 1. Log in to the Access Point Configuration Utility and choose Wireless > Wireless Radio Settings. The Wireless Radio Settings page opens:
Step 2. Click the Enabled radio button in the 802.11d Regulatory Domain Support field to enable IEEE 802.11d Regulatory Domain Support on the access point. When enabled, 802.11d Regulatory Domain Support causes the access point to broadcast beacons and probe responses to determine the country in which it operates. This allows client stations to operate in any country without reconfiguration.
Step 3. Click the On radio button In the Wireless Radio Interface field to turn the wireless radio interface on. This enables options to configure Mode and Channels settings.
Note: The MAC address for Radio Interface One is displayed in the MAC Address field.
Step 4. Choose a suitable wireless channel mode for the client access from the Mode drop-down list:
• 802.11a — This allows only 802.11a clients to connect to the access point.
• 802.11b/g — This allows only 802.11b/g, 802.11b, and 802.11g clients to connect to the access point.
• 802.11a/n — This allows only 802.11a/n, 802.11a, and 802.11n clients to connect to the access point.
• 802.11b/g/n — This allows only 802.11b, 802.11g, and 802.11n clients that operate in the 2.4-GHz frequency to connect to the access point.
• 5 GHz 802.11n — This allows 802.11n clients that operate in the 5-GHz frequency to connect to the access point.
• 2.4 GHz 802.11n — This allows 802.11n clients that operate in the 2.4-GHz frequency to connect to the access point.
Step 5. Select an available channel for the client access from the Channel drop-down list or select Auto to allow access point to scan and automatically select any available channel.
Step 6. Click Apply to save the Wireless Radio Settings.