Objective
The objective of this article is to show you how to identify rogue Access Points (APs) and rogue wireless clients in a Cisco Business Wireless (CBW) traditional or mesh network.
Applicable Devices | Firmware Version
CBW 15x series devices are not compatible with CBW 14x/240 series devices and coexistence on the same LAN is not supported.
Introduction
CBW Access Points (APs) are 802.11 a/b/g/n/ac (Wave 2) based, with internal antennas. They can be used as traditional standalone devices or as part of a mesh network.
In a perfect world, everyone would be respectful and honest when using your wireless network. Unfortunately, we don’t live in a perfect world. As an administrator, your job is to be aware of any potential problems.
Rogue APs are APs that have been installed on a network without your permission. Rogue clients are any other detected devices that do not belong to your company.
These connections could be totally innocent, but there is always a risk that these rogues will attempt to attack your network or steal sensitive information. To keep on top of this, you can view the rogue APs and rogue clients. Once detected, these rogues cannot be blocked through the AP, but it does give you information to investigate further.
The CBW APs will only detect rogues on channels you are currently using or channels that overlap.
View Rogue APs
Beginner Help
This toggled section highlights tips for beginners.
Logging In
Log into the Web User Interface (UI) of the Primary AP. To do this, open a web browser and enter https://ciscobusiness.cisco. You may receive a warning before proceeding. Enter your credentials.You can also access the Primary AP by entering https://[ipaddress] (of the Primary AP) into a web browser.
Tool Tips
If you have questions about a field in the user interface, check for a tool tip that looks like the following: 
Trouble locating the Expand Main Menu icon?
Navigate to the menu on the left-hand side of the screen, if you don’t see the menu button, click this icon to open the side-bar menu.
Cisco Business App
These devices have companion apps that share some management features with the web user interface. Not all features in the Web user interface will be available in the App.
Frequently Asked Questions
If you still have unanswered questions, you can check our frequently asked questions document. FAQ
Step 1
Log into the Web User Interface (UI) of the Primary AP. To do this, open a web browser and enter https://ciscobusiness.cisco. You may receive a warning before proceeding. Enter your credentials.
You can also access the Primary AP by entering https://<ipaddress> (of the Primary AP) into a web browser.
If you are unfamiliar with the terms used, check out Cisco Business: Glossary of New Terms.
Step 2
To make these configurations, you need to be in Expert View. Click on the arrow icon on the top-right menu of the Web UI to switch to Expert View.
Step 3
Navigate to Monitoring > Network Summary > Rogues > Access Points.
Step 4
Once this page opens, you can select to see 2.4 GHz or 5 GHz by clicking on the tab. By default, all rogue APs are labeled Unclassified. The AP does not change the labels for the rogue APs, that is something you would manually do.
Step 5
The rogue APs are listed, you can click on any of them to investigate further.
Step 6 (Optional)
If you want to classify any of the APs as Friendly or Malicious, you can select either option from the drop-down menu under Update Class. You might want to do this so that when you look at Unclassified Access Points in the future, you won’t have to sort through an entire list. Be sure to click Apply when done.
Step 7 (Optional)
If you want to label an AP as Internal (in network) or External (possibly a neighboring company) you can do that under the Update Status section. Click Apply when done.
View Rogue Clients
Step 1
Log into the Web UI of the Primary AP. To do this, open a web browser and enter https://ciscobusiness.cisco. You may receive a warning before proceeding. Enter your credentials.
You can also access the Primary AP by entering https://<ipaddress> (of the Primary AP) into a web browser. For some actions, you can go us the Cisco Business Mobile app.
Step 2
To make these configurations, you need to be in Expert View. Click on the arrow icon on the top-right menu of the Web UI to switch to Expert View. For details on setting up a RADIUS server, check out Radius
Step 3
Navigate to Monitoring > Network Summary > Rogues > Clients.
Step 4
If there are any rogue clients, they will be listed. In this example, no rogue clients have been detected.
Conclusion
Now you have the ability to see rogues in your network. If you see a lot of rogues on a channel you are using, you can change the channel. There are considerations to keep in mind, so check out the change RF channel article (link when available).