Enable Bonjour in Layer 2 Mode on Sx500 Series Stackable Switches

Available Languages

Download Options

  • PDF     (33.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (75.8 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (71.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 2, 2017
Document ID:SMB2571

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Enable Bonjour in Layer 2 Mode on Sx500 Series Stackable Switches

Objective

Bonjour facilitates a method to discover services on a Local Area Network. The switch as a Bonjour client periodically broadcasts Bonjour Discovery protocol packets to IP subnets which are directly connected, and thereby advertises its existence. By default, Bonjour is enabled on the Management VLAN.

When the switch is in Layer 2 mode, the Bonjour discovery is enabled globally and it cannot be enabled on a per-port or per-VLAN basis. In this case the switch advertises all the services that have been enabled by the administrator on the configuration on the Services page. When both Bonjour and ICMP are enabled, then the IP multicast address of Bonjour is shown on the Adding IP Multicast Group page. When Bonjour discovery is disabled, the switch does not advertise any service type advertisements and it does not respond to requests from the network management applications. This article explains how to enable Bonjour on the Sx500 Series Stackable Switch.

Applicable Devices

  • Sx500 Series Stackable Switches

Software Version

  • 1.3.0.62

Enable Bonjour in Layer 2 Mode

Step 1. Log in to the web configuration utility and choose Administration > Discovery > Bonjour. The Discovery-Bonjour page opens:

Step 2. Check Enable to enable Bonjour globally on the switch.

Step 3. Click Apply to save the settings.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco