Recurring range is a time range which can be configured along with absolute time range. If a time range has one or more recurring ranges and is configured to a 802.1x-enabled port, the port is active within the time period(s) defined in the recurring range(s) that are also within the absolute start and end time of the time range. The Recurring Range page enables the creation of a recurring range that can then be added to a time range created in the Time Range page. All time specifications are interpreted as local time. Daylight Saving Time does not affect this.
The objective of this document is to show you how to configure recurring range on ESW2-550X series switches.
Note: The Prerequisite of this article is Time Range configuration. An administrator has to configure the time range on the device first in order to configure the recurring range on that particular time range. For more information on how to configure the time range, search for the article Time Range Configuration on ESW2-550X Switches.
• ESW2-550X-48DC-R
• ESW2-550X-48-R
• v1.2.9.44
Step 1. Log in to the switch configuration utility and choose Administration > Time Settings > Recurring Range. The Recurring Range page opens:
Step 2. In the Time Range Name equals to field, choose the desired time range from the drop-down list and click Go.
The Recurring Time Range page opens.
Step 2. Choose the day of the week and the time at which the recurring range starts from the respective drop-down lists in the Recurring Starting Time field.
Step 3. Choose the day of the week and the time at which the recurring range ends from the respective drop-down lists in the Recurring Ending Time field.
Step 4. Click Apply to save the changes.
Note: The newly added entry is seen on the Recurring Range Table.
Step 1. Check the box for the required configuration that the user wants to delete and then click Delete. The configuration is removed and the Recurring Range page opens again.