The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The console port on ESW2-350G switches do not support flow control, meaning that the receiving device cannot absorb the data being sent to it as fast as the sending device can send more packets to it. Setting a lower console port transmission rate keeps the sending device from sending packets to the ESW2-350G at a faster rate than the ESW can receive the packets. This keeps the console port from being overloaded with packets. The console port usually supports slower transmission lower than modems.
The objective of this document is to explain how to configure the console port baud rate (data transmission rate) to access the switch with the console port to configure and troubleshoot the ESW2-350G switch.
Step 1. Log in to the switch configuration utility and choose Administration > Console Settings. The Console Settings page opens:
Step 2. Click Auto Detection to automatically detect the console Port Baud Rate.
Click Static to choose the desired console baud rate from the drop-down list.
Step 3. Click Apply.
User Account Management on ESW2-350G
Configure Idle Session Timeout on ESW2-350G