Objective:

The objective of this document is to show how to identify, troubleshoot, and disable the Smartport feature if it is causing problems with your switch.

Applicable Devices | Software Version

- CBS250 Series | 3.1 Download Latest

- CBS350 Series | 3.1 Download Latest

- Sx550X Series | 3.1 Download Latest

Introduction

Did you know that your CBS250 or CBS350 switch includes a Smartport feature?

This Smartport feature applies a preconfigured setup to that switch port based on the type of device that is trying to connect. Auto Smartport lets the switch apply these configurations to interfaces automatically when it detects the device.

Smartports have preset configurations for the following:

- Printer

- Desktop

- Guest

- Server

- Host

- IP Camera

- IP Phone

- IP Phone + Desktop

- Switch

- Router

- Wireless Access Points

Smartports can be a huge time-saver for you, but there may be circumstances where you need to change settings. In some instances, it might be easier to just disable the Smartport feature and move on! Not sure? Check this article out for more details.

This article will answer these questions:

- Do I have the Smartport feature enabled?

- What if I have the Smartport feature enabled, but it doesn’t seem to be working?

- How do I disable the Smartport feature?

First things first, let’s figure out if you have the Smartport feature enabled.

Do I have the Smartport feature enabled?

The short answer, it depends!

If you have a 3.0.0.69 (or earlier) firmware version and you upgrade to the latest (March 2021 release) 3.1 version (or later when available), the default setting will remain with the Smartport feature enabled.

If you purchase a switch that has the 3.1 firmware version (or later), the firmware will have the Smartport feature disabled by default. This change was made because some customers didn’t necessarily want to use the Smartport feature or it was causing an issue with connectivity and customers didn’t realize it was enabled.

If you aren’t sure if you have the feature enabled, you can check. Navigate to Smartport > Properties. At this location, you can view the Smartport settings or simply disable the feature if you choose.

If you would like detailed steps for upgrading firmware, check out the article Upgrade Firmware on a Switch.

What if I have the Smartport feature enabled, but it doesn’t seem to be working?

To check these possible issues, log into the Web User Interface (UI) the Switch.

Once in the Web UI, change Display Mode from Basic to Advanced. This is located in the top-right corner of your screen.

Check the discovery protocol settings

The switch requires Cisco Discovery Protocol (CDP) and/or Layer Link Discovery Protocol (LLDP) to be enabled. These protocols share identification information between connecting devices or network equipment, which enables a device to advertise the type of device, operating system version, IP address, configuration, and capabilities to the switch. CDP is specific to Cisco and probably won’t discover non-Cisco equipment. Both CDP and LLDP are enabled by default, so unless you manually changed it, you can move on to the next section.

If you need to manually change CDP and LLDP back to enabled, you should restart your equipment to see if the Smartport feature is now working. You can check these under the Administration tab. If that fixes your issue, congratulations!

If a device is not clearly identified by either CDP or LLDP, you might want to disable the Smartport feature to clear away issues. Click to jump to the disable Smartports section of this article.

Check Port Configurations

Step 1

Go to Administration.

Step 2

Scroll down and select Logs > RAM Memory.

Step 3

Check the device logs. Look for port locking placed to classic lock or any entries that did not result from a configuration that you set. Also, look for any entries that may place ports as Disabled or Down.

Step 4

Navigate to Administration.

Step 5

Scroll down and select Discovery – CDP > CDP Neighbor Information.

Step 6

Check devices that may or may not be Cisco devices connected to your switch. Verify they are the correct devices and that the IP addresses are correct.

Step 7

Click Administration.

Step 8

Select Discovery - CDP > CDP Neighbor Information.

.

Step 9

Check any available CDP information. If you are still having connectivity issues, follow the steps in the next section to disable the Smartport feature.

Check Port Security

Step 1

Navigate to Security.

Step 2

Scroll down and select Port Security.

Step 3

On the Port Security page, check for any ports that are not on Classic Lock. Classic Lock is the default for each port. Any port that is not on classic lock, has a limit on the number of devices on that port, which can cause disconnections. If you did not configure this setting, you can follow the steps to disable Smartports to fix this issue.

Step 4

Navigate back to Port Security and verify all ports are back to Classic Lock and verify connectivity with devices in your network.

If you experienced any disconnections or Internet problems, verify connectivity has returned. If this did not fix your port issues, you may want to disable the Smartport feature as detailed in the next section of this article.

How do I disable the Smartport feature?

Step 1

Choose Smartport > Properties.

Step 2

Select Disable next to Administrative Auto Smartport, to disable the Smartport globally on the switch. Click the Apply button.

This will disable the Smartport on all interfaces but will not affect manual VLAN configurations.

Conclusion:

In this document, you learned how to troubleshoot and disable the Smartport feature when connectivity issues arise in your network.

Looking for more articles on your CBS250 or CBS350 switch? Check out any of the links below for more information!

SNMP Settings             SNMP Views             SNMP Groups             DHCP Image Upgrade             Password Strength             TCP and UDP Settings             Port Security             Time Settings             Upgrade Firmware             Smartport Best Practices             Reset Switch             Troubleshoot: No IP Address             Troubleshoot Link Flapping             Create VLANs