Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

Internet Group Management Protocol (IGMP) Configuration RV180 and RV180W

Available Languages

Download Options

  • PDF     (71.0 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (115.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (84.5 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 13, 2017
Document ID:SMB2631
Internet Group Management Protocol (IGMP) Configuration RV180 and RV180W

Objectives

This document explains how to enable Internet Group Management Protocol (IGMP) on the RV180 and RV180W.

IGMP is used by hosts and routers on a IP network to create multicast group memberships. IGMP is used on IPv4 networks, IPv6 uses Multicast Listener Discovery( MLD) for its multicast management.

Applicable Devices

  • RV180
  • RV180W

Step-by-Step Procedure

IGMP Configuration

Step 1. Using the Configuration Utility, choose Firewall > Advanced Settings > IGMP Configuration. The IGMP Configuration page opens.

 

Step 2. Check the IGMP Proxy check box to enable the IGMP Proxy.

  • Enabling this allows the router and the nodes to talk with each other.

 

Step 3. Choose the Upstream Interface type.

Step 4. Click Save to save the settings.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

Related Cisco Community Discussions

This Document Applies to These Products

About Us
Contact Us
Work with Us