Objective

Bonjour is a protocol that discovers devices that can connect to a network and notifies these devices that they can connect to the network. This article explains how to enable Bonjour on the RV110W.

Applicable Devices

• RV110W

Steps of Procedure

Step 1. Use the router configuration utility to choose Administration > Bonjour.

Step 2. To the right of Bonjour, check the Enable checkbox to enable Bonjour.

Step 3. In the Bonjour Interface Control Table, check the checkbox in the Enable Bonjour column for each VLAN on which you want to enable Bonjour.

Step 4. Click Save to save changes or Cancel to discard them.