Configure Discovery-UPnP on RV180 and RV180W
UPnP is a feature that allows for the automatic discovery of devices that can communicate with the router.
The objective of this document is to explain how to configure Discovery - UPnP (Universal Plug and Play).
Steps of Procedure
Step 1. Use the router configuration utility to choose Administration > Discovery Settings > Discovery - UPnP. The Discovery - UPnP page opens.
Step 2. In the Discovery - UPnP page, check Enable in the UPnP field.
Step 3. In the Advertisement Period field, enter the advertisement period in seconds to specify how often the router will broadcast its UPnP information to all devices.
Step 4. Enter the Advertisement Time To Live in seconds to measure the number of hops to allow for each UPnP packet.
Note: A small value will limit the UPnP broadcast range.
Step 5. Check the Enable UPnP check box to associate UPnP with the appropriate VLAN.
Step 6. Click Save.