PDF(129.6 KB) View with Adobe Reader on a variety of devices
ePub(169.2 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(97.3 KB) View on Kindle device or Kindle app on multiple devices
Updated:November 29, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Configure Discovery-Bonjour on RV180 and RV180W
Bonjour is a service advertisement and discovery protocol. Bonjour only advertises the default services configured on the unit when enabled.
The objective of this document is to explain how to configure Discovery - Bonjour.
• RV180 • RV180W
Steps of Procedure
Step 1. Use the router configuration utility to choose Administration >Discovery Settings > Discovery - Bonjour. The Discovery - Bonjour page opens.
Step 2. In the Discovery - Bonjour page, check enable.
Step 3. Check the Enable Bonjour check box next to the associated VLAN.