Restore Factory Defaults on RV180 and RV180W

Available Languages

Download Options

PDF (28.7 KB)
View with Adobe Reader on a variety of devices
ePub (68.4 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (68.1 KB)
View on Kindle device or Kindle app on multiple devices

Updated:December 10, 2018

Document ID:SMB1960

Restore Factory Defaults on RV180 and RV180W

Objective

This article explains how to restore the settings back to its defaults on RV180 and RV180W routers. This feature can be used when all the troubleshooting methods are exhausted to fix any problem.

NOTE: Restoring the factory defaults will remove all the current settings and the device will reboot. Settings like Firewall rules, VPN Policies, LAN/WAN settings and all other settings will be lost. Make a back up of all the necessary settings. While the restoration is in progress:

• Do NOT close the browser window
• Do NOT go online
• Do NOT turn off or power-cycle the router
• Do NOT shutdown the computer

Applicable Devices

• RV180 VPN Router
• RV180W Wireless-N Multifunction Router

Restore to Factory Defaults

Step 1. Use the Configuration Utility of the router to choose Administration > Restore Factory Defaults which opens the Restore Factory Defaults page.

Step 2. To proceed with restoration process, click Default. It will take couple of minutes before the router reboots.

Was this Document Helpful?

Restore Factory Defaults on RV180 and RV180W

Available Languages

Download Options

Objective

Applicable Devices

Restore to Factory Defaults

Was this Document Helpful?

Contact Cisco

Related Cisco Community Discussions

This Document Applies to These Products