Packet Capture and Trace on RV120W and RV220W Wireless-N VPN Firewalls

Available Languages

Download Options

PDF (44.8 KB)
View with Adobe Reader on a variety of devices
ePub (85.6 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (83.0 KB)
View on Kindle device or Kindle app on multiple devices

Updated:December 10, 2018

Document ID:SMB1581

Packet Capture and Trace on RV120W and RV220W Wireless-N VPN Firewalls

Objectives

This document explains how to capture and trace packets on Cisco RV120W and RV220W Wireless-N VPN Firewalls.

Capture Packets allows you to capture all packets that pass through the selected interface (LAN, dedicated WAN, or optional WAN).

Applicable Devices

• RV120W
• RV220W

Capturing and Tracing Packet

Step 1. Use the Graphical User Interface of the device to choose Administration > Diagnostics > Capture Packets. The Capture Packets window opens.

Step 2. To trace packets, click Packet Trace.

Step 3. From the Select Network drop-down menu, choose the appropriate interface whose packets are to be captured and click Start.

Step 4. Click Stop, to stop the capture and then click Download to save a copy of the packet capture.

Step 5. Packets can be traced by on what location the copy is downloaded.

Note: Packet trace is limited to 1MB of data per capture session.

Was this Document Helpful?

Packet Capture and Trace on RV120W and RV220W Wireless-N VPN Firewalls

Available Languages

Download Options

Objectives

Applicable Devices

Capturing and Tracing Packet

Was this Document Helpful?

Contact Cisco

Related Cisco Community Discussions

This Document Applies to These Products