One-to-One Network Address Translation (NAT) Rules Configuration on RV120W and RV220W
PDF(64.5 KB) View with Adobe Reader on a variety of devices
ePub(131.6 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(297.8 KB) View on Kindle device or Kindle app on multiple devices
Updated:November 29, 2018
One-to-one NAT is a way to make systems behind a firewall configured with private IP addresses appear to have public IP addresses. In situations where the Internet Service Provider (ISP) provides only one public IP address to a subscriber at a time and if the subscriber would like to send and receive packets on multiple machines which have private IP addresses, one-to-one NAT is helpful and causes the private IP addresses to appear as public IP addresses. In this way every machine can stay connected to Internet and not have to have a public IP addrss itself. One-to-one NAT can work with IP ranges for networks or hosts to produce the same result.
The objective of this document is to configure one-to-one NAT on the RV120W and RV220W.
• RV120W • RV220W
Add/Edit/Delete One-to-One NAT Rule Configuration
Add a NAT rule
Step 1. Log in to the web configuration utility and choose Firewall > Advance Settings > One-to-One NAT. The One-to-One NAT page opens: