Objective

The objective of this article is to go over the new site deletion feature in Cisco Business Mobile App version 1.4 and later.

Applicable Devices | Software Version

- Cisco Business Mobile App | 1.4

Introduction

In Cisco Business Mobile App version 1.4, a new feature has been added that allows you to delete a site inside of the App.

Prior to version 1.4 of the mobile app, the only way to remove a site was to uninstall and reinstall the app. Uninstalling the app would delete all the data and you would be required to reset and re-deploy all the networks managed by the app. If you had multiple sites, this was frequently not an option.

Now, in Cisco Business Mobile App version 1.4 and later, the option to delete a particular site can make it easy for you to manage multiple sites all at the same time.

Site Deletion

Step 1

In the Cisco Business Mobile App, navigate to the All Sites menu.

Step 2

Click on the 3 dots next to the site you want to delete. In this example, Branch Office is selected.

Step 3

Choose Delete.

Step 4

Click Next to continue.

Step 5

Click Confirm to proceed with deletion of the site.

Conclusion

You did it! You have successfully deleted a site using the Cisco Business Mobile App.

Looking for more articles on the Cisco Business Mobile application? Look no further! Click any of the tags below to be brought directly to that topic. Enjoy!

Overview             Troubleshooting             Device Management             Upgrade Firmware             Reboot a Device             Backup and Restore             Debug Logs             Configure VLAN