PLATFORM_WCCP-4-SDM_MISMATCH: WCCP requires sdm template routing

Available Languages

Download Options

  • PDF     (6.0 KB)
    View with Adobe Reader on a variety of devices
Updated:July 22, 2014
Document ID:118025

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Contents

Question:

Question:

WCCP negotiation between Cisco Web Security Appliance (WSA) and Cisco Catalyst 3750 doesn't work & the 3750 switch console reports: "00:00:58: %PLATFORM_WCCP-4-SDM_MISMATCH: WCCP requires sdm template routing"

Note: This message applies only to Catalyst 3750 and 3560 switches.


To support the WCCP feature on Catalyst 3750 and 3560 switches, you need to enable the Switch Database Management (SDM) routing template.


Recommended Action:

Modify the SDM template to enable the routing template. Use the "sdm prefer routing" global configuration command, and then "reload" the switch by using the reload privileged EXEC command.


See also: Catalyst 3750, 3560, 3550, 2970, and 2960 Switch System Message Guide, 12.2(37)SE

Revision History

Revision Publish Date Comments
1.0
22-Jul-2014
Initial Release
TAC Authored

Contributed by Cisco Engineers

  • Denis Jacobi and Siddharth Rajpathak
    Cisco TAC Engineers.  

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products